怎样用超级终端备份华为hg520s固件？
Factory reseting...(console is locked)housekeeping: save config ok!
Shutdown PPP Process
Shutdown UPnP Process.
System Restarting...
NBcf1edfs1Z
PP Boot 9.0.8.9 (25th June 2005)
Copyright (c) 2004 Conexant Systems Ltd.
SDRAM size = 0x1000000
PLL indicates clock speed set to maximum value of 96MHz
Finding flashfs partition...done.
NPnLZMA 4.05
Quantum v1.01
Allocatable memory starts @ 0x553900, end @ 0x1000000
Skip the pool Javalin!!!!No, or invalid, configuration information in EEPROM - t
rying FLASH
Valid configuration (size 256)
HG-520 version V100R001B010(Sep 14 2006)
BSP: Argon 4x2 Eval BSP v1.0
CSP: Argon 4x1 CSP v1.0 (ISOS 9.0)
Copyright (c) 2005
NP software version is 0x00000900 (reply took 6us)
SNMP Research EMANATE/Lite Agent Version 16.1.0.25
Waitting IM & bun configuration is ready
Copyright 1989-2004 SNMP Research, Inc.
ip101_DeviceAutoStart
atm_port_num =1 ip101_PortEnable:PHY id1. Wanted 0243 got 1023 phyAddress is 5
ip101_PortEnable:PHY id2. Wanted 0c54 got 0007 phyAddress is 5
adm6996m system control register default =
adm6996m system control register set =
hardware igmp snoopig default =
hardware igmp snoopig set =
bun_TimerEnable
Crossbow find PCI device !!!
name /pool/Javalin
default size=3456/prefix=352/count=200/extramsg=100/task/webserver: create varPo
ol 9d7730 300000
/task/webserver: create fixedPool a20b30 64000
im:Invalid argument:Failed to set layer2Session to (null)
im:Invalid argument:failed to set the SNTP host to
Invalid argument: DnsServerAddress INVALID
Invalid argument: DnsServerAddress INVALID
Invalid argument: DnsServerAddress INVALID
Invalid argument: DnsServerAddress INVALID
Wireless Setting entry
...No im.upload,do nothing...
USE JAVELIN_WIRELESS_IF
wireless:Invalid argument:Failed to set MaxFrameBurst to 1500
Login:
Javelin Sync Im Config !!!
You must supply a username
Login: admin
Password: *****
Login successful
-->
下一步怎么操作，怎样备份，和刷新啊。
怎样用超级终端备份华为hg520s固件？
敲入一个?号后又显示下面的一些字。802.1x 802.1x port based authentication
WLAN Configure Wireless Module
agent Get a file from a remote host
ald Configuration commands for ald
atmloopback commands to configure remote ATM loopback
autoprov
bridge Configure layer 2 bridge
classifier Packet classifier configuration commands
console Console access
dhcpclient DHCP client configuration commands
dhcpserver DHCP server configuration commands
diagnosticTest
dnsclient DNS client configuration commands
dnsrelay DNS relay configuration
dyndns Dynamic DNS Updater commands
ethernet Commands to configure ethernet transports
firewall Firewall configuration commands
help Top level CLI help
igmp
imdebug Directly access the information model
ip Configure IP router
logger Log to a remote host using syslog
meter Packet metering configuration command
nat NAT configuration commands
port Physical port configuration commands
pppoa PPP over ATM configuration
pppoe
radclient RADIUS Client Configuration commands
rfc1483 Commands to configure RFC1483 transports
scheduler Configuration commands for scheduler
security Security configuration commands not specific to NAT or firewall
snmp
sntpclient
source Read a file of commands
system System administration commands
tftpc TFTP client commands
tp Test Portal commands
transports Transport configuration commands
upnp UPnP configuration commands
user User commands
webserver Webserver configuration commands
wpa Configure WPA (Wireless Protected Access)
zipb Configure Dynamic ZIPB mode
-->
页:
[1]