为何启动不了？
本帖最后由 zzq0106 于 2010-12-31 16:55 编辑一篇介绍64k和128k固件的原文如下：
16M的Flash如果目前是非ISP原版CFE的话，在CFE下使用“e a”命令清空Flash后，刷了128K的固件，那么一般应该正常成功启动image。启动地址为0xbe20000。
我目前的固件启动地址是0xbe80000，用e a命令之后，刷128k带cfe的原版固件是在地址0xbe20000处刷的，可是完成后无法启动，输出信息如下：
CFE> e a
Erase all flash (except bootrom)? (y/n):y
No image tag found.Erase the blocks start at ...............................................................................................................................
Resetting board... version 1.0.37-10.1 for
BCM96358 (32bit,SP,BE)
Build Date: Tue Apr 24 15:57:24 CST 2007 (gavin@FD5)
Copyright (C) 2000-2006 Broadcom Corporation.
Boot Address 0xbe000000
Initializing Arena.
Initializing Devices.
Parallel flash device: name AM29LV320MT, id 0x2201, size 16384KB
CPU type 0x2A010: 300MHz, Bus: 133MHz, Ref: 64MHz
CPU running TP0
Total memory: 33554432 bytes (32MB)
Total memory used by CFE:0x80401000 - 0x80527C50 (1207376)
Initialized Data: 0x8041D580 - 0x8041F480 (7936)
BSS Area: 0x8041F480 - 0x80425C50 (26576)
Local Heap: 0x80425C50 - 0x80525C50 (1048576)
Stack Area: 0x80525C50 - 0x80527C50 (8192)
Text (code) segment: 0x80401000 - 0x8041D57C (116092)
Boot area (physical): 0x00528000 - 0x00568000
Relocation Factor: I:00000000 - D:00000000
** Flash image not found. **
Board IP address : 192.168.1.1:ffffff00
Host IP address : 192.168.1.100
Gateway IP address :
Run from flash/host (f/h) : f
Default host run file name : vmlinux
Default host flash file name : bcm963xx_fs_kernel
Boot delay (0-9 seconds) : 1
Board Id (0-8) : 96358VW2
Number of MAC Addresses (1-32) : 12
Base MAC Address :
PSI Size (1-64) KBytes : 24
Main Thread Number : 0
这时候刷入原版带cfe的128k固件
web info: Waiting for connection on socket 0.
web info: Waiting for connection on socket 1.
web info: Waiting for connection on socket 0.
web info: Waiting for connection on socket 1.
web info: Upload 4383172 bytes, Broadcom image format.
web info: Waiting for connection on socket 0.
Flashing CFE: .
Flashing root file system and kernel at 0xbe020000: ..................................
*** Image flash done *** !
Resetting board...
CFE version 1.0.37-10.1 for BCM96358 (32bit,SP,BE)
Build Date: Tue Apr 24 15:57:24 CST 2007 (gavin@FD5)
Copyright (C) 2000-2006 Broadcom Corporation.
Boot Address 0xbe000000
Initializing Arena.
Initializing Devices.
Parallel flash device: name AM29LV320MT, id 0x2201, size 16384KB
CPU type 0x2A010: 300MHz, Bus: 133MHz, Ref: 64MHz
CPU running TP0
Total memory: 33554432 bytes (32MB)
Total memory used by CFE:0x80401000 - 0x80527C50 (1207376)
Initialized Data: 0x8041D580 - 0x8041F480 (7936)
BSS Area: 0x8041F480 - 0x80425C50 (26576)
Local Heap: 0x80425C50 - 0x80525C50 (1048576)
Stack Area: 0x80525C50 - 0x80527C50 (8192)
Text (code) segment: 0x80401000 - 0x8041D57C (116092)
Boot area (physical): 0x00528000 - 0x00568000
Relocation Factor: I:00000000 - D:00000000
** Flash image not found. **
请问这是为什么？
顶一下，有人知道吗
页:
[1]