H108B TTL连接胡乱弄出来的东西帮忙看下
solosW-ehci usb00: Solos USB 2.0solosW-ehci usb00: irq 9, pci mem ff800100
solosW-ehci usb00: new USB bus registered, assigned bus number 1
solosW-ehci usb00: park 0
solosW-ehci usb00: USB 0.0 initialized, EHCI 1.00, driver 10 Dec 2004
usb usb1: Product: Solos USB 2.0
usb usb1: Manufacturer: Linux 2.6.11.12 ehci_hcd
usb usb1: SerialNumber: Solos EHCI
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
INTR_MASK 37, 37
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
u32 classifier
OLD policer on
NET: Registered protocol family 2
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP established hash table entries: 1024 (order: 1, 8192 bytes)
TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
TCP: Hash tables configured (established 1024 bind 1024)
IPv4 over IPv4 tunneling driver
ip_conntrack version 2.1 (248 buckets, 1984 max) - 320 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack_rtsp v0.01 loading
ip_nat_rtsp v0.01 loading
netfilter PSD loaded - (c) astaro AG
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 15
Please set the MAC Address for the WAN Bridge.
Set the Environment variable 'wan_br_mac'.
MAC Address should be in the following format: xx.xx.xx.xx.xx.xx
Ebtables v2.0 registered
NET: Registered protocol family 8
NET: Registered protocol family 20
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (jffs2 filesystem).
Freeing init memory: 76K
init started:BusyBox v1.01 (2008.07.08-07:58+0000) multi-call binary
Starting pid 133, console /dev/ttyS0: '/etc/rc'
Alarm clock
Loading Conexant BSP...
Using /lib/modules/2.6.11.12/kernel/drivers/net/arm/solos_ethernet.ko
solos_ethernet: module license 'unspecified' taints kernel.
rtl8306sd_hw_init
rtl8306_switch_init
rtl8306_initsucess!
rtl8306_initQossucess!
rtl8306_setCPUPortsucess!
rtl8306_initVlansucess!
rtl8306 IGMP snooping enabled!
rtl8306sd_hw_init
rtl8306sd_hw_init
rtl8306sd_hw_init
rtl8306sd_hw_init
rtl8306sd_hw_init
rtl8306sd_hw_init
solos_eth_mii: probed
Using /lib/hsl_mod_gpl.o
Using /lib/cnxt_fiq.o
Using /lib/cnxt_drv.o
BASE MAC ADDRESS 00:11:22:33:44:55
Starting Conexant drivers
.
Quantum v1.01
msc16 loaded
'create dev file with mknod /dev/adet_char c 244 0'.
starting task turbo_WhipTask
DSL MSC16 imem 4096, dmem 2048
DSL MSC16 version 1.3
msc16_load_file returned 0
sram_buffer : 0xffa01360 addr : 0x70001360
Passing command buffer 70001360 to MSC16
Conexant drivers started
Using /lib/wlan_wsc.ko
MY INIT Called
Using /lib/modules/2.6.11.12/kerRUNNING Timer started
nel/arch/arm/mach-solos/solosw_defaultrestore.ko
enable virtual port
value is 20001
value is 30002
value is 40004
value is 50008
Loading Wireless ...
Reading True PDA ...
Using /lib/stun_ahb.ko
DRIVER VERSION: 3.0
---dsl is off--
---dsl is off--
sm_drv_traffice_init called
Received the MAC Address trap
init_mac(): 0:22:93:22:f7:91
Waiting for message from kernel
SIOCGIFFLAGS: No such device
SIOCSIFHWADDR: No such device
SIOCGIFFLAGS: No such device
in atm_dev_register, acQosAdslName bunatm
---dsl is off--
Starting pid 251, console /dev/ttyS0: '/sbin/ge
ZXV10-H108B login: MSG(0x003) module proc_msg_init
envdb-enable =
ct_jffs2 exist!
=========== mount ct_jffs ===========
No need to syn version!
received link state trap
LOG(0x103) module set_apply_conf:syslogd process not run
one second = 100 tick
bringup_interface_and_ssid:essid =CNC_xF7w , ,wlan_old = 0
---dsl is off--
---dsl is off--
WLAN(0x20213) module Create a new wireless interface wlan0
wlan mode modify: mode = 3
received link state trap
received link state trap
rate modify: tx rate = auto
beacon modify: beacon = 100
channel modify :channel = auto
power modify: :tx_power = 1
Disable_wlan_security:find paed process
init_wlan_security :status = 2enh_security = 0
etc filename = /etc/paed/paed.wlan0.conf
isfs filename = /isfs/paed.wlan0.conf
wps filename = /etc/wsc_config.txt
init_wlan_security :wpa2_type = 1 ,
wlan0_wpa_wpa2_flag = 1
start wps ...............
end init_wlan_security
wlan_init :max power is = 19 dBm tx_power = 1
rf_switch_act:state = 1
turning on wlan led ,but don't set status
WLAN(0x20213) module wlan0 interface up!
use 10 second 1029 tick by WLAN module init.
SF(0x110401) modulefirewall set spi 0
SF(0x110401) modulefirewall set telecom high level
########## set sip power enter #########
########## set sip power sip -1 h323 -1 rtsp 1 ########
set rtsp 1
######## set sip power enter sip 0 h323 0 rtsp 1 #######
########## set sip power enter #########
########## set sip power sip -1 h323 1 rtsp -1 ########
set h323 1
######## set sip power enter sip 0 h323 1 rtsp 1 #######
setsockopt error
SF(0x110401) module SFS alg, type 8, value 1
setsockopt error
SF(0x110401) module SFS alg, type 7, value 1
use 2 second 137 tick by SF module init.
ETH(0x20212) module init_emacphy is called
ETH(0x20212) module switch eth is 0
readmac: 2, 00-22-93-22-f7-92
readmac: 3, 00-22-93-22-f7-93
readmac: 4, 00-22-93-22-net/bridge/br_ioctl.c,old_deviceless636:c
f7-94
readmac: 5, 00-22-93-22-f7-95
readmac: 1, 00-22-93-22-f7-91
g_dhcpswitch.dhcpswitch in dhcpsr_init:|00110000|
br_cmd_setportsdhcprelay arg1= 00110000
set ports for dhcprelay |c|________
DDNS_DNS(0x10601) module dnsmasq start successful
received link state trap
use 2 second 251 tick by PROUTE module init.
TIME(0x10602) module msntp start successful
PF(0x411) module initializing port mapping...
oid to set wps led sent
count = 35 exclude_unencrypted
count 1 = 35
open tr069 domain file failure!
PT(0x412) module initializing pt ......
cmd is |brctl setmacfdft 0|
WF(0x100413) module webfilter init success
SC(0x426) module initializing service control...
DMZ(0x425) module initializing DMZ...
WEBD(0x114) module webd start
FILE:thttpd.c,master_init: 510, iret:0
DEVICE PIN: 22779472
USB mount startsend dev info~~~~
res MSG_USB_CONF_DEV_ON strat
use 5 second 529 tick by FILEMANAGE module init.
Ingress(0x10304) module initializing ingress config module
init_mid_conf_data start
paed master_init success
pConfig->enable=0
pConfig->port=23
pConfig->userName=root
pConfig->userPass=root
pConfig->enable=0
pConfig->port=23
pConfig->userName=root
pConfig->userPass=root
SHADOW_FILE
tmpStry=root:ABE3UhboE3geg:12086::99999::::
tmpStrg=root:ABE3UhboE3geg:12086::99999::::
*******read telnet port**********
Read file "/var/tmp/telnet.conf".
port=23
*******read telnet port ok **********
portnbr=23
CORE(0x007) module 104001 the device finish reboot
use 23 second 2293 tick by oam init.
BRIDGE(0x40224) module add a interface wlan0 into bridge br0
wlan0 has in br
gDevInfo.p_modelname=H108B
manage: br2684ctl -r 0
manage: br2684ctl -b -c 0 -e 0 -q UBR,aal5:max_pcr=3000,pcr=3000,max_cdv=500000,mbs=45 -a 88.88
manage: br2684ctl -r 1
manage: br2684ctl -b -c 1 -e 0 -q UBR,aal5:max_pcr=3000,pcr=3000,max_cdv=500000,mbs=45 -a 0.35
manage: br2684ctl -r 2
manage: br2684ctl -b -c 2 -e 0 -q UBR,aal5:max_pcr=3000,pcr=3000,max_cdv=500000,mbs=45 -a 88.90
manage: br2684ctl -r 3
manage: br2684ctl -b -c 3 -e 0 -q UBR,aal5:max_pcr=3000,pcr=3000,max_cdv=500000,mbs=45 -a 88.89
turning on wlan led ,set led
received link state trap
use 13 second 1301 tick by WANBRIDGE module deal sys msg (msg id is 0x0B06,from module id is 0x0201).
use 13 second 1356 tick by IFCORE module deal unicast msg (msg id is 0x0001,from module id is 0x0000).
MSG(0x003) module deal_unicast_msg:module don't find
MSG(0x003) module deal_unicast_msg:module don't find
TR069(0x112) module TR069 process start success!
QOSTEMPLET_QUEUE(0x10308) module qq_config, acCmd tc qdisc del dev bunatm root
QOSTEMPLET_QUEUE(0x10308) module qq_config, acCmd2 ifconfig bunatm down
******* MODE: AP with built-in Registrar and UPnP Proxy *******
MSG(0x003) module deal_unicast_msg:module don't find
MSG(0x003) module deal_unicast_msg:module don't find
MSG(0x003) module deal_unicast_msg:module don't find
MSG(0x003) module deal_unicast_msg:module don't find
MSG(0x003) module deal_unicast_msg:module don't find
BRIDGE(0x40224) module creat a new bridge br0, key is bridge0
IFCORE(0x201) module IFCore want to add a wan connection!
BRIDGE(0x40224) module add a interface usb0 into bridge br0
enable tr069
BRIDGE(0x40224) module add a interface wlan0 into bridge br0
device wlan0 entered promiscuous mode
br0: port 1(wlan0) entering learning state
sendigmpquery if name is not wan port,but wlan0
br0: topology change detected, propagating
br0: port 1(wlan0) entering forwarding state
BRIDGE(0x40224) module add a interface eth0 into bridge br0
device eth0 entered promiscuous mode
BRIDGE(0x40224) module add a interface eth1 into bridge br0
device eth1 entered promiscuous mode
BRIDGE(0x40224) module add a interface eth2 into bridge br0
device eth2 entered promiscuous mode
BRIDGE(0x40224) module add a interface eth3 into bridge br0
device eth3 entered promiscuous mode
BRIDGE(0x40224) module add a interface nbif1 into bridge br0
device nbif1 entered promiscuous mode
br0: port 6(nbif1) entering learning state
send igmpqueryok for nbif1
br0: topology change detected, propagating
br0: port 6(nbif1) entering forwarding state
BRIDGE(0x40224) module add a interface nbif2 into bridge br0
device nbif2 entered promiscuous mode
br0: port 7(nbif2) entering learning state
send igmpqueryok for nbif2
br0: topology change detected, propagating
br0: port 7(nbif2) entering forwarding state
BRIDGE(0x40224) module add a interface nbif3 into bridge br0
device nbif3 entered promiscuous mode
br0: port 8(nbif3) entering learning state
send igmpqueryok for nbif3
br0: topology change detected, propagating
br0: port 8(nbif3) entering forwarding state
use 1 second 117 tick by BRIDGE module deal unicast msg (msg id is 0x0B06,from module id is 0x0201).
CMD(0x004) module cmd_get_media_type,mediatype:0,userright:0,
CMD(0x004) module cmd_get_media_type,mediatype:0,userright:0,
IFCORE(0x201) module Create a Wan Connection successfully!
PPP(0x80231) modulepppoe call proxy !&key=DSL0.PVC0.WB0.ppp0&realif=N/A&type=524849&woltype=wan&conntype=PPPoE&connname=1_TR069_R_88_88&servicename=TR069&wiu_name=1_TR069_R_88_88&user=bjcnc-hgw@hgw-nms&pass=s1b5x7z9&enable=0&maxuser=4&lanif=&opt=1&servicelist=TR069&! add w
PROUTE(0x10252) module pr_do_msg, msg 715
PROUTE(0x10252) module pr_do_msg, key DSL0.PVC0.WB0.ppp0, ifname 1_TR069_R_88_88, wantype 1
PROUTE(0x10252) module pr_do_msg, msg 714
PROUTE(0x10252) module pr_do_msg, opr 1, key DSL0.PVC0.WB0.ppp0, ifname 1_TR069_R_88_88, ipaddr
CMD(0x004) module cmd_get_media_type,mediatype:0,userright:0,
CMD(0x004) module cmd_get_media_type,mediatype:0,userright:0,
cmd_add_instance_ex: oid=419 fkey=DSL0.PVC1 iid=2 okey=DSL0.PVC1.WB1.ppp1
CMD(0x004) module cmd_get_media_type,mediatype:0,userright:0,
CMD(0x004) module cmd_get_media_type,mediatype:0,userright:0,
cmd_add_instance_ex: oid=419 fkey=DSL0.PVC2 iid=3 okey=DSL0.PVC2.WB2.ppp2
CMD(0x004) module cmd_get_media_type,mediatype:0,userright:0,
CMD(0x004) module cmd_get_media_type,mediatype:0,userright:0,
cmd_add_instance_ex: oid=419 fkey=DSL0.PVC3 iid=4 okey=DSL0.PVC3.WB3.ppp3
IP(0x80232) module ip_do_msg, msg b06
IFCORE(0x201) module Create a Wan Connection successfully!
IP(0x80232) module ip_do_kernel_lan, cmd ifconfig br0 192.168.1.1 netmask 255.255.255.0
DHCPSR(0x10604) module key=bridge0.IP0ifname=br0 ipaddr=192.168.1.1 opt=1
DHCPSR(0x10604) module can't get dns from DNS MM
DHCPSR(0x10604) module can't get domain from DNS MM
DHCPSR(0x10604) module can't get NTP from DNS MM
DHCPSR(0x10604) module start udhcpd pid = 683
DHCPSR(0x10604) module start udhcpd pid = 683
use 1 second 110 tick by DHCPSR module deal sys msg (msg id is 0x070F,from module id is 0x0232).
ROUTE(0x10251) module rt_do_msg, msg 710
row id =-1
ROUTE(0x10251) Bridge Multicasting for br0 isEnabled.
module rt_do_msg, if langroup1, key bridge0.IP0, ip
ROUTE(0x10251) module rt_do_msg, servicetype 0, bindinfo 2
IFCORE(0x201) moduleCreate Wan Connection Success: ip is |192.168.1.1|, realif is |br0|
IFCORE(0x201) module IFCore: send ipchange to voip control!
IFCORE(0x201) module IFCore: send ipchange to snmp control!
use 1 second 114 tick by IP module deal unicast msg (msg id is 0x0B06,from module id is 0x0201).
IGMP(0x10603) module enable snooping
DHCPSR(0x10604) module reload dhcpd config file!
DDNS_DNS(0x10601) module dnsmasq stop successful
DDNS_DNS(0x10601) module dnsmasq start successful
ROUTE(0x10251) module rt_do_msg, msg b02
PROUTE(0x10252) module pr_do_msg, msg b02
TIME(0x10602) module msntp start successful
Ingress(0x10304) module pBuffer = |&connname=langroup1&|
Ingress(0x10304) module as langroup1 up， ingress rule on which enabled
UPNP(0x10801) module The msg id is 2818.
handleUDPEXSignal: Get Msg!
handleUDPEXSignal: Initialize UDPEX OK!
use 4 second 410 tick by UPNP module deal multcast msg (msg id is 0x0B02,from module id is 0x0201).
MSG(0x003) module deal_unicast_msg:module don't find
MSG(0x003) module deal_unicast_msg:module don't find
use 21 second 2182 tick by msg main.
QOSTEMPLET_QUEUE(0x10308) module qq_config, acCmd tc qdisc del dev bunatm root
QOSTEMPLET_QUEUE(0x10308) module qq_config, acCmd2 ifconfig bunatm down
ReadOwnMsg if_down
in trans status cmd from:tr069
TR069(0x112) module have been configed successfully
in trans status cmd from:tr069
CMD(0x004) module end trans
TR069(0x112) module tr069_send_param_attr:start
TR069(0x112) module tr069_send_param_attr:InternetGatewayDevice.DeviceInfo.X_CT-COM_MiddlewareMgt.CTMgtIPAddress=8&InternetGatewayDevice.DeviceInfo.X_CT-COM_MiddlewareMgt.CTUserIPAddress1=8&InternetGatewayDevice.DeviceInfo.X_CT-COM_MiddlewareMgt.MgtDNS=8&InternetGatewayDevic
RecvNotifyInitMsg start
pMsg:InternetGatewayDevice.DeviceInfo.X_CT-COM_MiddlewareMgt.CTMgtIPAddress=8&InternetGatewayDevice.DeviceInfo.X_CT-COM_MiddlewareMgt.CTUserIPAddress1=8&InternetGatewayDevice.DeviceInfo.X_CT-COM_MiddlewareMgt.MgtDNS=8&InternetGatewayDevice.DeviceInfo.X_CT-COM_MiddlewareMgt.InternetPvc=8&InternetGatewayDevice.DeviceInfo.X_CT-COM_MiddlewareMgt.MiddlewareURL=8
tr069 add_param_notity:szPath:InternetGatewayDevice.DeviceInfo.X_CT-COM_MiddlewareMgt.CTMgtIPAddress, attr:8
Function getObject: ERROR: parameter(InternetGatewayDevice.DeviceInfo.X_CT-COM_MiddlewareMgt. X_CT-COM_VLANDevice 0) is wrong4
tr069 add_param_notity:fail get getObjId
Function getObject: ERROR: parameter(InternetGatewayDevice.DeviceInfo.X_CT-COM_MiddlewareMgt. X_CT-COM_VLANDevice 0) is wrong4
Function getObject: ERROR: parameter(InternetGatewayDevice.DeviceInfo.X_CT-COM_MiddlewareMgt. X_CT-COM_VLANDevice 0) is wrong4
tr069 add_param_notity no notify
tr069 add_param_notity:szPath:InternetGatewayDevice.DeviceInfo.X_CT-COM_MiddlewareMgt.CTUserIPAddress1, attr:8
Function getObject: ERROR: parameter(InternetGatewayDevice.DeviceInfo.X_CT-COM_MiddlewareMgt. X_CT-COM_VLANDevice 0) is wrong4
tr069 add_param_notity:fail get getObjId
Function getObject: ERROR: parameter(InternetGatewayDevice.DeviceInfo.X_CT-COM_MiddlewareMgt. X_CT-COM_VLANDevice 0) is wrong4
Function getObject: ERROR: parameter(InternetGatewayDevice.DeviceInfo.X_CT-COM_MiddlewareMgt. X_CT-COM_VLANDevice 0) is wrong4
tr069 add_param_notity no notify
tr069 add_param_notity:szPath:InternetGatewayDevice.DeviceInfo.X_CT-COM_MiddlewareMgt.MgtDNS, attr:8
Function getObject: ERROR: parameter(InternetGatewayDevice.DeviceInfo.X_CT-COM_MiddlewareMgt. X_CT-COM_VLANDevice 0) is wrong4
tr069 add_param_notity:fail get getObjId
Function getObject: ERROR: parameter(InternetGatewayDevice.DeviceInfo.X_CT-COM_MiddlewareMgt. X_CT-COM_VLANDevice 0) is wrong4
Function getObject: ERROR: parameter(InternetGatewayDevice.DeviceInfo.X_CT-COM_MiddlewareMgt. X_CT-COM_VLANDevice 0) is wrong4
tr069 add_param_notity no notify
tr069 add_param_notity:szPath:InternetGatewayDevice.DeviceInfo.X_CT-COM_MiddlewareMgt.InternetPvc, attr:8
Function getObject: ERROR: parameter(InternetGatewayDevice.DeviceInfo.X_CT-COM_MiddlewareMgt. X_CT-COM_VLANDevice 0) is wrong4
tr069 add_param_notity:fail get getObjId
Function getObject: ERROR: parameter(InternetGatewayDevice.DeviceInfo.X_CT-COM_MiddlewareMgt. X_CT-COM_VLANDevice 0) is wrong4
Function getObject: ERROR: parameter(InternetGatewayDevice.DeviceInfo.X_CT-COM_MiddlewareMgt. X_CT-COM_VLANDevice 0) is wrong4
tr069 add_param_notity no notify
tr069 add_param_notity:szPath:InternetGatewayDevice.DeviceInfo.X_CT-COM_MiddlewareMgt.MiddlewareURL, attr:8
Function getObject: ERROR: parameter(InternetGatewayDevice.DeviceInfo.X_CT-COM_MiddlewareMgt. X_CT-COM_VLANDevice 0) is wrong4
tr069 add_param_notity:fail get getObjId
Function getObject: ERROR: parameter(InternetGatewayDevice.DeviceInfo.X_CT-COM_MiddlewareMgt. X_CT-COM_VLANDevice 0) is wrong4
Function getObject: ERROR: parameter(InternetGatewayDevice.DeviceInfo.X_CT-COM_MiddlewareMgt. X_CT-COM_VLANDevice 0) is wrong4
tr069 add_param_notity no notify
RecvNotifyInitMsg end
IFCORE(0x201) module Wan Connection |br0|'s ip changed
DHCPSR(0x10604) module reload dhcpd config file!
DDNS_DNS(0x10601) module dnsmasq stop successful
DDNS_DNS(0x10601) module dnsmasq start successful
ROUTE(0x10251) module rt_do_msg, msg b01
ROUTE(0x10251) module rt_do_msg, key bridge0.IP0
PROUTE(0x10252) module pr_do_msg, msg b01
PROUTE(0x10252) module pr_do_msg, key bridge0.IP0
UPNP(0x10801) module The msg id is 2817.
handleUDPEXSignal: Get Msg!
handleUDPEXSignal: Initialize UDPEX OK!
ROUTE(0x10251) module rt_do_cmd, cmd 5
CMD(0x004) module cmd_get_media_type,mediatype:0,userright:0,
IP(0x80232) module ip_do_cmd, cmd 5
in wlan do_cmd_mget
out wlan do_cmd_mget ok
WEPKey(0x609) module do_cmd_mget wepkey called quit ok
in psk do_cmd_mget
out psk do_cmd_mget ok
IP(0x80232) module ip_do_cmd, cmd 5
CMD(0x004) module cmd_get_media_type,mediatype:0,userright:0,
CMD(0x004) module cmd_get_media_type,mediatype:0,userright:0,
CMD(0x004) module cmd_get_media_type,mediatype:0,userright:0,
CMD(0x004) module cmd_get_media_type,mediatype:0,userright:0,
CMD(0x004) module cmd_get_media_type,mediatype:0,userright:0,
CMD(0x004) module cmd_get_media_type,mediatype:0,userright:0,
CMD(0x004) module cmd_get_media_type,mediatype:0,userright:0,
CMD(0x004) module cmd_get_media_type,mediatype:0,userright:0,
CMD(0x004) module cmd_get_media_type,mediatype:0,userright:0,
CMD(0x004) module cmd_get_media_type,mediatype:0,userright:0,
CMD(0x004) module cmd_get_media_type,mediatype:0,userright:0,
CMD(0x004) module cmd_get_media_type,mediatype:0,userright:0,
IP(0x80232) module ip_do_cmd, cmd 5
IP(0x80232) module ip_do_cmd, cmd 5
IP(0x80232) module ip_do_cmd, cmd 5
in trans status cmd from:tr069
TR069(0x112) module have been configed successfully
in trans status cmd from:tr069
CMD(0x004) module end trans
ROUTE(0x10251) module rt_do_cmd, cmd 5
CMD(0x004) module cmd_get_media_type,mediatype:0,userright:0,
IP(0x80232) module ip_do_cmd, cmd 5
IP(0x80232) module ip_do_cmd, cmd 5
IP(0x80232) module ip_do_cmd, cmd 5
IP(0x80232) module ip_do_cmd, cmd 5
in trans status cmd from:tr069
TR069(0x112) module have been configed successfully
in trans status cmd from:tr069
CMD(0x004) module end trans
ReadOwnMsg if_down
ReadOwnMsg if_down
---dsl is off--
QOSTEMPLET_QUEUE(0x10308) module qq_config, acCmd tc qdisc del dev bunatm root
QOSTEMPLET_QUEUE(0x10308) module qq_config, acCmd2 ifconfig bunatm down
---dsl is off--
QOSTEMPLET_QUEUE(0x10308) module qq_config, acCmd tc qdisc del dev bunatm root
QOSTEMPLET_QUEUE(0x10308) module qq_config, acCmd2 ifconfig bunatm down
ReadOwnMsg if_down 啥乱七八糟的一大页{{XPX8{{ 后来我终于知道了,原来 这个是猫启动的信息,不过后来我用root 用户名密码连接上猫了,可是不知道下面该怎么把配置文件读出来 看什么啊？就是没有上线。dsl is off 我可能没有表达清楚,我是说用TELNET用户名密码登陆成功了
ZXV10-H108B login: root
Password:
Jan1 01:07:03 login: root loginon `ttyS0'
BusyBox v1.01 (2008.07.08-07:58+0000) Built-in shell (ash)
Enter 'help' for a list of built-in commands.
下面不知道怎么导出配置文件,命令不会用, Enter 'help' for a list of built-in commands
这个是说：输入 help将列出内置的命令，就像DOS 内部命令的帮助。 谢谢,已经解决了,现在已经完全不怕被远端更改了,
不过现在我想刷成其他的系统,不知道哪位有经验的给个方法或联接
页:
[1]