DB120-B1砖了吗？高手指点？能进CFE,能进WEB，但刷不成功
拿到一个DB120-B1，软件版本也没有问题，FLASH芯片也没有问题，但当时没有TTL线，用WEB方式刷的 bcm96358GW_1.3_96358VW2 这个固件，然后亮红灯。偶尔重新开机也能亮绿灯，也能进入192.168.1.1.昨天买了一根TTL线，能进入CFE，经过设置后，但只有LAN4口能PING通192.168.1.1，但用这个口再刷固件时报错，无法刷成功，是不是撤底砖了？ 重新用正确的固件再刷新吧！还需要在ttl数据线连接设置一下启动参数 能PING通就没砖头
接好TTL线，打开电源，在TTL启动信息可以看到的时候就狂按回车，进入CFE之后，哪个LAN口 PING的通网线就插哪里，设置本地为192.168.1.100，然后访问192.168.1.1，就可以进WEB再刷；
你这个可能是BOARD ID之类的没设置对，重新设置下 重新用正确的固件再刷新吧！还需要在ttl数据线连接设置一下启动参数
YES东 发表于 2009-11-19 09:38 https://www.chinadsl.net/images/common/back.gif
老大，给正确固件的地址吧，我在这里下载了好多个。那个启动参数怎么设置！ 完蛋了，FLASH好像坏了，高手指点下：
CFE version 1.0.37-10.3 for BCM96358 (32bit,SP,BE)
Build Date: 二1月 29 07:41:15 CST 2008 (root@ZTJ)
Copyright (C) 2000-2006 Broadcom Corporation.
Boot Address 0xbe000000
Initializing Arena.
Initializing Devices.
Parallel flash device id 0279 is not supported.
*** Board is not initialized properly ***
Press:<enter> to use current value
'-' to go previous parameter
'.' to clear the current value
'x' to exit this command
96358VW2 ------- 0
96358VW ------- 1
96358GWVG ------- 2
96358MV2G ------- 3
96358M ------- 4
96358B ------- 5
96358BGWE_OEM1 ------- 6
96359PONG ------- 7
96358SV ------- 8
96358VW2_b20 ------- 9
Board Id (0-9) :0
Number of MAC Addresses (1-32) :012
Base MAC Address :00:00:00:00:00:0000:1e:40:7a:be:61
PSI Size (1-64) KBytes :24
Flash Block Size (1-128) in KBytes:0128
Auxillary File System Size Percent:0
Main Thread Number :0
Flash layout changed. Need to erase all flash except bootrom
Invalid command: "e"
Available commands:
Flash Layout: Boot Kern[-1,0xbdffffff]
AuxFS[-1,0x00000000] Misc[-1,0x00000000] PSI[-1,0x00000000]
Flash RootFS Partition Length: 1107296257
Auto-negotiation timed-out
10 MB Half-Duplex (assumed)
CPU type 0x2A010: 300MHz, Bus: 133MHz, Ref: 64MHz
CPU running TP0
Total memory: 33554432 bytes (32MB)
Total memory used by CFE:0x80401000 - 0x805285A0 (1209760)
Initialized Data: 0x8041DD30 - 0x8041FDC0 (8336)
BSS Area: 0x8041FDC0 - 0x804265A0 (26592)
Local Heap: 0x804265A0 - 0x805265A0 (1048576)
Stack Area: 0x805265A0 - 0x805285A0 (8192)
Text (code) segment: 0x80401000 - 0x8041DD30 (118064)
Boot area (physical): 0x00529000 - 0x00569000
Relocation Factor: I:00000000 - D:00000000
Use default boot line parameters: e=192.168.1.1:ffffff00 h=192.168.1.159 g= r=h
f=308nfs6358 i=bcm963xx_fs_kernel d=1 p=0
Board IP address : 192.168.1.1:ffffff00
Host IP address : 192.168.1.159
Gateway IP address :
Run from flash/host (f/h) : h
Default host run file name : 308nfs6358
Default host flash file name : bcm963xx_fs_kernel
Boot delay (0-9 seconds) : 1
Board Id (0-9) :
Number of MAC Addresses (1-32) : 0
Base MAC Address : 00:00:00:00:00:00
PSI Size (1-64) KBytes : 24
Flash Block Size (1-128) in KBytes: 0
Auxillary File System Size Percent: 0
Main Thread Number : 0
*** Press any key to stop auto run (1 seconds) ***
Auto run second count down: 1
web info: Waiting for connection on socket 0.
CFE>
CFE> web info: Waiting for connection on socket 1.
web info: Waiting for connection on socket 0.
web info: Upload 3982716 bytes, Broadcom image format.
CFE>
Flashing root file system and kernel at 0xbdffffff: Failed to flash root file sy
stem. Error: -1
Resetting board...
CFE version 1.0.37-10.3 for BCM96358 (32bit,SP,BE)
Build Date: 二1月 29 07:41:15 CST 2008 (root@ZTJ)
Copyright (C) 2000-2006 Broadcom Corporation. web info: Waiting for connection on socket 1.
web info: Waiting for connection on socket 0.
web info: Upload 3982716 bytes, Broadcom image format.
CFE>
Flashing root file system and kernel at 0xbdffffff: Failed to flash root file sy
stem. Error: -1
Resetting board...
CFE version 1.0.37-10.3 for BCM96358 (32bit,SP,BE)
Build Date: 二1月 29 07:41:15 CST 2008 (root@ZTJ)
Copyright (C) 2000-2006 Broadcom Corporation. 风险真大，真不能直接用WEB方式，害死人了 楼主刷好了吗，你现在用这种方式肯定是不行的，你的这个FLASH应该也是MX29系列的，要用编程器写才行，可以联系我。。。。
页:
[1]