请教华为S-Box7200 IPTV机顶盒问题
请问这个机顶盒可以更改MAC地址吗？TTL详细启动讯息：
BCM97403
AB
1s
K1
K2
K3
K4
K5
2
Copy Code...34TUCV
Common Firmware Environment (CFE) version 1020020for BCM97403A0,
(Little Endia
n Mode)
Build Date: Tue May 13 21:06:07 2008 (chenxu@sunniwel-f3df0f)
Copyright (C) 2000-2007 Broadcom Corporation.
Initializing Arena.
Initializing Devices.
CPU speed: 297MHz
Total memory: 128MB
Total flash: 16MB
Total memory used by CFE:0x87000000 - 0x87041A54 (268884)
Initialized Data: 0x8703AAA0 - 0x8703F6F8 (19544)
BSS Area: 0x8703F6F8 - 0x87041A54
Local Heap: 0x87041AD4 - 0x87141AD4 (1048576)
Stack Area: 0x87141AD4 - 0x87143AD4 (8192)
Text (code) segment: 0x87000000 - 0x8700EAA8 (60072)
Read E2PROM ldrVersion = f9074 ,ret=0
Read E2PROM return 0
Read E2PROM return 0
Read E2PROM return 0
Read E2PROM return 0
Read E2PROM return 0
Read E2PROM return 0
Read E2PROM return 0
Read E2PROM return 0
Read E2PROM return 0
Read E2PROM return 0
Read E2PROM return 0
Read E2PROM return 0
Read E2PROM return 0
Read E2PROM return 0
Read E2PROM
Init information:epprom_init_flag = 17858608,Invalid = 0
partition name : root1; valid: 1; offset: 0; size: 4194304
partition name : root2; valid: 1; offset: 4194304; size: 4194304
partition n offset: 8388608; size: 4194304
partition name : cfe; valid: 1; offset: 12582912; size: 1048576
partition name : logo; valid: 1; offset: 14155776; size: 131072
partition name : para1; valid: 1; offset: 14286848; size: 131072
partition name : para2; valid: 1; offset: 14417920; size: 131072
partition name : font; valid: 1; offset: 14548992; size: 1048576
partition name : setting; valid: 1; offset: 13631488; size: 524288
partition name : playlist; valid: 1; offset: 15597568; size: 262144
partition name : swfs; valid: 1; offset: 15859712; size: 917504
partition name : root1; size: 4194304
partition name : root2; size: 4194304
partition name : app; size: 4194304
partition name : cfe; size: 1048576
partition name : setting; size: 524288
partition name : logo; size: 131072
partition name : para1; size:
partition name : para2; size: 131072
partition name : font; size: 1048576
partition name : playlist; size: 262144
partition name : swfs; size: 917504
sw_gpio_set hPin=34,val=0 ,res=0
sw_gpio_set hPin=35,val=0 ,res=0
sw_gpio_set hPin=58,val=0 ,res=0
sw_gpio_set 58 for mute control 0
Standard:PAL
GIF LIB ret:0 width=720,height=576
cByte = 0
MAC Address:00:07:63:09:94:73
MAC Address2:01:07:63:09:94:73
AddMemSizeToOption mem=48M
AddMemSizeToOption tmem=128M
Loader:elf Filesys:raw Dev:flash0.root1 File:
Options:root=/dev/mtdblock1rootf
stype=cramfs rw fes=128
partitions=whole:16384&root1:4096&root2:4096&app:4096&cf
e:1024&setting:512&logo:128¶1:128¶2:128&font:1024&playlist:256&s
wfs:896
mac=c攕?mem=48M tmem=128M
Loading: sw_gpio_set hPin=58,val=0 ,
sw_gpio_set 58 for mute control 0
0x80001000/2658438 0x8028a086/139142 Entry address is 0x8026e000
total=bytes
Starting program at 0x8026e000
Done initializing U1
found console=0
HI WORLD!!!
gathering mode: 0x00000264 at 0x0xb000040c
split mode: 0x00000001 at 0xb0000410
board_init_once: regval=40a16502, ddr_strap=3, 4 chips, pci_size=2
Detected 256 MB on board
cfeBootParms ===> root=/dev/mtdblock1rootfstype=cramfs rw fes=128
partitions=w
hole:16384&root1:4096&root2:4096&app:4096&cfe:1024&setting:512&logo:12
8¶2:128&font:1024&playlist:256&swfs:896 mac=c 攕?mem=48M
tmem=128M
Number of Nand Chips = 0
Kernel boot options: root=/dev/mtdblock1rootfstype=cramfs rw fes=128
partition
s=whole:16384&root1:4096&root2:4096&app:4096&cfe:1024&setting:512&logo:1
28¶1
:128¶2:128&font:1024&playlist:256&swfs:896 mac=c 攕?mem=48M
tmem=128M co
nsole=ttyS0,115200
gFlashSize=00000000, query=0051, =0052, =0059
**********BOOTEDFROMFLASH, Base=1e000000
Initial CP0 22 value : 0x00010020
Updated CP0 22 value :
CP0 reg 22 sel 0 to 5: 0xe3800000 0x00000020 0x00000000 0x00000020
0x00000000 0x
00000020
Sundry 0xb0404000, chipId 0x00007403, bcm7403Ax 01
CPU revision is: 00020000
change kenel memory to 58MDetermined physical RAM map:
memory: 10000000 @ 00000000 (usable)
User-defined physical RAM map:
node
node
<4>bootmem_init: map 0 type 1
<4>bootmem_init: curr_pfn 0x000002ad last_pfn 0x0000ffff max_low_pfn
0x00010000
<4>bootmem_init: Done
<7>On node 0 totalpages: 65536
<7>DMA zone: 65536 pages, LIFO batch:31
<7>Normal zone: 0 pages, LIFO batch:1
<7>HighMem zone: 0 pages, LIFO batch:1
Before resource_init
After resource_init
Built 1 zonelists
<5>Kernel command line: root=/dev/mtdblock1rootfstype=cramfs rw
fes=128 partit
ions=whole:16384&root1:4096&root2:4096&app:4096&cfe:1024&setting:512&log
o:128&pa
ra1:128¶2:128&font:1024&playlist:256&swfs:896 mac=c 攕?
mem=64M tmem
=128M console=ttyS0,115200
before init RAC 0x02a00000 0x00000000
after init RAC 0x02a000
Primary instruction cache 32kB, physically tagged, 2-way, linesize 16
bytes.
Primary data cache 32kB, 2-way, linesize 16 bytes.
MIPS_CACHE_ALIASES = ON
end of ld_mmu_r4xx0
end of local_tlb_init
Wired: 17
Index:0 pgmask=16Mb va=d0000000 asid=00
Index:1 pgmask=16Mb va=d2000000 asid=00
Index:2 pgmask=16Mb va=d4000000 asid=00
Index:3 pgmask=16Mb va=d6000000 asid=00
Index:4 pgmask=16Mb va=d8000000 asid=00
Index:5 pgmask=16Mb va=da000000 asid=00
Index:6 pgmask=16Mb va=dc000000 asid=00
Index:7 pgmask=16Mb va=de000000 asid=00
Index:8 pgmask=16Mb va=e0000000 asid=00
Index:9 pgmask=16Mb va=e2000000 asid=00
Index: 10 pgmask=16Mb va=e4000000 asid=00
Index: 11 pgmask=16Mb va=e6000000 asid=00
Index: 12 pgmask=16Mb va=e8000000 asid=00
Index: 13 pgmask=16Mb va=ea000000 asid=00
Index: 14 pgmask=16Mb va=ec000000 asid=00
Index: 15 pgmask=16Mb va=ee000000 asid=00
Index: 16 pgmask=16Mb va=f0000000 asid=00
$$$$$$$$$$ 1394 dev id ffffffff
$$$$$$$$$$ mini slot dev id ffffffff
$$$$$$$$$$ external dev id ffffffff
Synthesized TLB refill handler (20 instructions).
Synthesized TLB load handler fastpath (32 instructions).
Synthesized TLB store handler fastpath (32 ins
Synthesized TLB modify handler fastpath (31 instructions).
timer irq 68 end 57
PID hash table entries: 2048 (order: 11, 32768 bytes)
mips_counter_frequency = 148000000 from Calibration, = 148500000 from
header(CPU
_MHz/2)
Using 148.500 MHz high precision timer.
################## brcm_serial_console_init, sercon=802629f0
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
free_all_bootmem_core: Free allocator bitmap
Memory: 60164k/262144k available (2210k kernel code, 201820k reserved,
269k data
, 112k init, 0k highmem)
Mount-cache hash table entries: 512
get_RSVD_size: Returning Size 0x0c000000
Checking for 'wait' instruction...available.
NET: Registered protocol family 16
SCSI subsystem initialized
usbcore: registered new driver hub
Initializing Cryptographic API
Broadcom serial driver version 1.00 (2000-11-09) with no serial options
enabled
Serial: 8250/16550 driver $Revision: 1.90 $ 1 ports, IRQ sharing
disabled
ttyS0 at MMIO 0x0 (irq = 66) is a 16550A
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
loop: loaded (max 8 devices)
Broadcom BCM74031 Ethernet Network Device v1.0 Apr 10 2009 19:37:01
: MAC Address: 00:07:63:09:94:73
SUNDRY revision = 74030001, have IP Hdr Opt=1
init_buffers: 104 descriptors initialized
init_buffers: 00000068 descriptors initialized, from flowctl
BCMINTMAC: 100 MB Full-Duplex (auto-neg)
PPP generic driver version 2.4
NET: Registered protocol family 24
BCM97XXX flash device 1 : 0x 2000000 at 0x1e000000
Partion Version:0
partition name: whole; partition offset: 0; partition size: 16777216
partition name: root1; partition offset: 0; partition size: 4194304
partition name: root2; partition offset: 4194304; partition size:
4194304
partition name: app; partition offset: 8388608; partition size: 4194304
partition name: cfe; partition offset: 12582912; partition size: 1048576
partition name: setting; partition offset: 13631488; par
partition name: logo; partition offset: 14155776; partition size: 131072
partition name: para1; partition offset: 14286848; partition size:
131072
partition name: para2; partition offset: 14417920; partition size:
131072
partition name: font; partition offset: 14548992; partition size:
1048576
partition name: playlist; partition offset: 15597568; partition size:
262144
partition name: swfs; partition offset: 15859712; partition size: 917504
Broadcom 9xxxx mapped flash: Found 1 x16 devices at 0x0 in 16-bit bank
Amd/Fujitsu Extended Query Table at 0x0040
fixup_use_write_buffers
Broadcom 9xxxx mapped flash: CFI does not contain boot bank location.
Assuming t
op.
fixup_use_erase_chip
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
Creating 12 MTD partitions on "Broadcom 9xxxx mapped flash":
0x00000000-0x01000000 : "whole"
0x00000000-0x00400000 : "root1"
0x00400000-0x00800000 : "root2"
0x00800000-0x00c00000 : "app"
0x00c00000-0x00d00000 : "cfe"
0x00d00000-0x00d80000 : "setting
0x00d80000-0x00da0000 : "logo"
0x00da0000-0x00dc0000 : "para1"
0x00dc0000-0x00de0000 : "para2"
0x00de0000-0x00ee0000 : "font"
0x00ee0000-0x00f20000 : "playlist"
0x00f20000-0x01000000 : "swfs"
usbmon: debugs is not available
ehci_hcd_brcm_init: Initializing 1 EHCI devices
10 Dec 2004 USB 2.0 'Enhanced' Host Controller (EHCI) Driver (EHCI-brcm
-0)
drivers/usb/host/ehci-brcm.c: starting brcm EHCI USB Controller
- USB h/w setup mode <N>
- USB power enable set for active LOW mode
- Resetting at b0480310
<-- brcm_ehci
brcm-ehci brcm-ehci.0: BRCM EHCI
brcm-ehci brcm-ehci.0: new USB bus registered, assigned bus number 1
brcm-ehci brcm-ehci.0: irq 62, io mem 0x10480300
brcm-ehci brcm-ehci.0: park 0
brcm-ehci brcm-ehci.0: USB 0.0 initialized, EHCI 1.00, driver 10 Dec
2004
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (OHCI-brcm-0)
drivers/usb/host/ohci-brcm.c: starting brcm OHCI USB Controller
- Resetting at b0480408
<-- brcm_start_hc
brcm-ohci-0 brcm-ohci-0.0: B
brcm-ohci-0 brcm-ohci-0.0: new USB bus registered, assigned bus number 2
brcm-ohci-0 brcm-ohci-0.0: irq 63, io mem 0x10480400
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (OHCI-brcm-1)
drivers/usb/host/ohci-brcm.c: starting brcm OHCI USB Controller
- Resetting at b0480508
<-- brcm_start_hc
brcm-ohci-1 brcm-ohci-1.1: BRCM OHCI
brcm-ohci-1 brcm-ohci-1.1: new USB bus registered, assigned bus number 3
brcm-ohci-1 brcm-ohci-1.1: irq 64, io mem 0x10
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
NET: Registered protocol family 2
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
NET: Registered protocol family 1
NET: Registered protocol family 1
VFS: Mounted root (cramfs filesystem) readonly.
K5
2
Copy Code...34TUCV
free_initmem: init_begin=8026e000, init_end=8028a000for BCM97403A0,
(Little Endia
Freeing unused kernel memory: 112k freed
n Mode)
Build
init started:BusyBox v1.2.1 (2007.08.03-11:06+0000) multi-call binary
Copyright (C) 2000
Starting pid 16, console /dev/ttyS0: '/etc/init.d/rcS'
Initializing Arena.
Algorithmics/MIPS FPU Emulator v1.5
CPU speed: 297MHz
Mount /proc fsl memory: 128M
Mount /dev/pts
Total fl
start services
T
Linux (none) 2.6.12-5.0-brcmstb #3 Fri Apr 10 19:46:27 CST 2009 7452a0
unknown
Initialized Data: 0x8703AAA0 -
usbcore: registered new driver rt73
insmod /lib/modules/rt73.ko 0x8703F6F8 - 0x87041A
Common Firmware Environment (CFE) version 1020020for BCM9740
sys releasedEndia
ress
swinit successfully!
OSD_WIDTH:720 OSD_HEIGHT:576MEM_SIZE:23068672 Tue May 13 21:06:07
2008 (chenxu@sunniwel-f3
Boot version: 1030071
Built at Apr_11_2009__11:49:57right (C) 2000-2007 Broadcom C
: 0x1008100
Initializing
Init GPIO OK!
: offset=0x0, size=0x400000 speed: 297MHz
Total memory:
: offset=0x400000, size=0x400000
Total memory used by CFE:0x87000000 - 0x870
: offset=0x800000, size=0x400000
Initialized Data: 0x8703
: offset=0xc00000, size=0x100000
BSS Area:
: offset=0xd00000,
Total mem:134217728, SDKoffset:671088647858608,Invalid = 0
bsettop_init OK!
partiti
SCREEN: Open SD Display-0t: 0; size: 4194304
Thread-<tHdmiMonitor : 0 : 103eba0> openedrtition name : root2;
valid: 1; offset: 4194304;
.. OK 4194
sw_screen_set_standard: <> STANDARD --> PAL
partition n offset: 8388608; size: 4194304
sw_graphics_init ++
partition na
sw_graphics_create_osd++82912; size: 1048576
sw_graphics_create_osd: SD screen dimension -> .ame :
logo; valid: 1; offset: 14155776; size: 131072
PLANE: set des-position org = is Entered.name :
para1; valid: 1; offset: 14286848; size: 131072
PLANE: set des-position sync= is Entered.tition name
: para2; valid: 1; offset: 14417920; size: 13107
sw_plane_create: plane=0x10403b8, x=0, y=0, w=720, h=576, o
partition
PLANE: set des-position org = is Entered.
partition n
PLANE: set des-position sync= is Entered.partition
name : root2; size: 4194304
sw_plane_create: plane=0x10407f8, x=360, y=506, w=240, h=40,
order=90
partition name : cfe; size: 1048576
AAAAAtitio
malloc: sett
GIF decode ok288
lValue=2tition name : logo; size: 13107
value=1030071
partit
Sunniwell shell,(c) 2007 sunniwell.
p
==================================
>sw_network_connect static,res=0
ifconfig eth0 up still continue wait 1,res=0
ifconfig eth0 up still continue wait 2
sw_gpio_set
ifconfig eth0 up still continue wait 3
Standard:PAL
ifconfig eth0 up still continue wait 4
cByt
ifconfig eth0 up still continue wait 5:94:73
M
ifconfig eth0 up still continue wait 6
AddMemSizeToOptio
ifconfig eth0 up still continue wait 7MemSizeToOption tmem=128M
ifconfig eth0 up still continue wait 8Dev:flash0.root1 File:
Options:root=/d
ifconfig eth0 up still continu
0x80001000/2658438 本帖最后由 跟踪你 于 2009-6-16 14:56 编辑
CEF信息：
CFE> help
Available commands:
init_dram Read I2C devices.
write_dram Read I2C devices.
read_dram Read I2C devices.
write16 Read I2C devices.
write32_by_write16Read I2C devices.
write32 Read I2C devices.
read16_block_loop Loop read datablock.
read32_read16 Read I2C devices.
read16 Read I2C devices.
read32_block_loop Loop read datablock.
read32_by_read16 Read I2C devices.
read32 Read I2C devices.
gv6111_reset Read I2C devices.
gv6111_module_initRead I2C devices.
test_ddram Read I2C devices.
write_tsblock Read I2C devices.
set console Change the active console device
loop Loop a command
macprog Program MAC addresses.
macprog2 Program a specific MAC address.
flash Update a flash memory device
memtest Test memory.
f Fill contents of memory.
e Modify contents of memory.
d Dump memory.
u Disassemble instructions.
autoboot Automatic system bootstrap.
batch Load a batch file into memory and execute it
go Start a previously loaded program.
boot Load an executable file into memory and execute it
load Load an executable file into memory without executing it
save Save a region of memory to a remote file via TFTP
download download flash devices.
ping Ping a remote IP host.
arp Display or modify the ARP Table
ifconfig Configure the Ethernet interface
sleep Sleep for specified milliseconds.
waitusb Wait for USB device to be installed.
show heap Display information about CFE's heap
show memory Display the system physical memory map.
show devices Display information about the installed devices.
unsetenv Delete an environment variable.
printenv Display the environment variables
setenv Set an environment variable.
help Obtain help for CFE commands
For more information about a command, enter 'help command-name'
*** command status = 0 那位高手懂得CEF改MAC的命令啊？~？ 期望高手出现! 楼主我也想修该马车
页:
[1]