创维SK-D746如何查telnet 的账号密码,TTL命令如何用
UserName: telecomadminPassword: ********
ECNT> cd/user
Unknown command '▒cd/user' - try 'help'
ECNT> help
? - alias for 'help'
base - print or set address offset
bdinfo- print Board Info structure
boot - boot default, i.e., run 'bootcmd'
bootd - boot default, i.e., run 'bootcmd'
bootflag- bootflag read/swap command
bootm - boot application image from memory
chpart- change active partition
cmp - memory compare
coninfo - print console devices and information
cp - memory copy
crc32 - checksum calculation
dcache- enable or disable data cache
echo - echo args to console
editenv - edit environment variable
efuse - efuse - efuse command
env - environment handling commands
exit - exit script
false - do nothing, unsuccessfully
fdt - flattened device tree utility commands
fip_test- fip_test - test command
flash - flash - flash command
go - start application at address 'addr'
help - print command description/usage
icache- enable or disable instruction cache
imginfo - imginfo - Show tclinux.bin version command
iminfo- print header information for application image
imxtract- extract a part of a multi-image
itest - return true/false on integer compare
loadb - load binary file over serial line (kermit mode)
loads - load S-Record file over serial line
loadx - load binary file over serial line (xmodem mode)
loady - load binary file over serial line (ymodem mode)
loop - infinite loop on address range
md - memory display
mm - memory modify (auto-incrementing address)
mtd - mtd - mtdcommand
mtdparts- define flash/nand partitions
mw - memory write (fill)
nm - memory modify (constant address)
ping - send ICMP ECHO_REQUEST to network host
printenv- print environment variables
reset - Perform RESET of the CPU
run - run commands in an environment variable
saveenv - save environment variables to persistent storage
setenv- set environment variables
showvar - print local hushshell variables
sleep - delay execution for some time
source- run script from memory
sr_test - sr_test - test command
test - minimal test like /bin/sh
tftpboot- boot image via network using TFTP protocol
true - do nothing, successfully
version - print monitor, compiler and linker version
telnet_username=CMCCAdmin
telnet_passwd=s2@We3%Dc# 1.加密,查不到
2.渣度一下,你就上当 已经花20元买来了,就是改不了地区,谁有改地区方法、
以前整过一个,telnet账号密码就是useradmin 和Pon521。但是总是登不上去提示错误,后来破解开配置文件后查找telnet配置。结果发现配置里写的就是这俩。当时就服了。后来自己修改了自己设置的。结果正常能用自己设置的,证明配置文件修改有效。但是原始文件中的Pon521为什么登不上去就还是未知数。 yangpan12345678 发表于 2023-12-5 10:28
已经花20元买来了,就是改不了地区,谁有改地区方法、
求分享下TELNET用户名和密码!
求之不得,感谢了 看看,学习一下 修改创维sn,mac的命令是什么 请教各位大佬,如何开启创维光猫telnet,网上的方法无效。
页:
[1]
2