xtangliangqq 发表于 2021-2-7 15:34:45

wypzss 发表于 2021-2-7 19:11:45

xtangliangqq 发表于 2021-2-8 17:00:11

aiyi888 发表于 2021-2-18 18:42:11

谢谢老板

WallaceSir 发表于 2021-3-11 23:09:00

这个好像shell也是补全的吧

1515495606 发表于 2021-3-21 22:10:47

必须要一份的，非常感谢楼主，1515495606@qq.com

1515495606 发表于 2021-3-21 22:13:18

刚才回复了没反应？1515495606@qq.com感谢

700443 发表于 2021-5-12 02:49:35

辛苦大佬了，这个猫粮有点多，还请劳烦转邮箱一个700443@qq.com

jsksjhp 发表于 2021-6-18 00:19:18

刷了你的固件现在TTL不能输入了。我都不知道是哪里问题
hi_L2_flow_port_get_511x, warning: flow not find
hi_vlan_user_add_511x, error: ret 0xfc000108 !
hi_l3_if_rule_check, faltal error: ip_version nonsupport
hi_L2_flow_port_get_511x, warning: flow not find
hi_vlan_user_add_511x, error: ret 0xfc000108 !
hi_l3_if_rule_check, faltal error: ip_version nonsupport
hi_L2_flow_port_get_511x, warning: flow not find
hi_vlan_user_add_511x, error: ret 0xfc000108 !

ppp_open: br0_ifindex 7

nf_alg_rtsp_nat_policy:0
hi_egress_car_resource_get_511x, info: car id 2
hi_egress_car_resource_get_511x, info: car id 3
hi_egress_car_resource_get_511x, info: car id 4
hi_egress_car_resource_get_511x, info: car id 5
hi_egress_car_resource_get_511x, info: car id 6
hi_egress_car_resource_get_511x, info: car id 7
hi_egress_car_resource_get_511x, info: car id 8
hi_egress_car_resource_get_511x, info: car id 9
hi_egress_car_resource_get_511x, info: car id 10
wifi para select A
PCI: enabling device 0000:00:00.0 (0140 -> 0142)


=== pAd = cf5b1000, size = 978744 ===

<-- RTMPAllocAdapterBlock, Status=0
pAd->CSRBaseAddress =0xcf5a0000, csr_addr=0xcf5a0000!
RX DESC c1880000size = 4096
<-- RTMPAllocTxRxRingMemory, Status=0
PKMode=0
1. Phy Mode = 9
2. Phy Mode = 9
filp_open err
filp_open err
The EEPROM in Flash is wrong, use default
3. Phy Mode = 9
AntCfgInit: primary/secondary ant 0/1
IS_RT5392 = 1, bAutoTxAgcG = 1
MCS Set = ff ff 00 00 00
SYNC - BBP R4 to 20MHz.l

The link of ETH2 is up, uni_phy
eth status changed: port 2, status 0
Main bssid = 20:f1:7c:a8:58:64
<==== rt28xx_init, Status=0
0x1300 = 00064380
nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.

DeviceType = MSFT 5.0
IP:            33663168
devicetype:    MSFT 5.0

start
set log file to:/var/console.log

===Voip_SendQuerySetting=========
===board kick off=========
The link of ETH2 is down, uni_phy
eth status changed: port 2, status 1

jsksjhp 发表于 2021-6-20 13:35:23

jsksjhp 发表于 2021-6-18 00:19
刷了你的固件现在TTL不能输入了。我都不知道是哪里问题
hi_L2_flow_port_get_511x, warning: flow

这个固件前后刷了4次，说一下情况，这个固件可以恢复定制界面，而且无法TTL。这个固件没有不全SHELL，基本没什么用。
页: 1 2 3 4 5 6 7 8 9 10 [11] 12 13 14
查看完整版本: 华为MA5675M固件和华为MA5675固件，亲测！