中兴F460 V2.0 开SSID2加密

dipck

  光猫是中兴F460 硬件版本V2.0，请问要如何修改以下代码才能使ChinaNet-13加密呢？

<WLANConfiguration instance="2">
        <Name>wl0.1</Name>
        <MaxBitRate>54</MaxBitRate>
        <SSID>ChinaNet-13</SSID>
        <RadioEnabled>TRUE</RadioEnabled>
        <WMMSupported>TRUE</WMMSupported>
        <UAPSDSupported>TRUE</UAPSDSupported>
        <WMMEnable>TRUE</WMMEnable>
        <X_BROADCOM_COM_BaseCfg_MBSSNumOfAdapter>4</X_BROADCOM_COM_BaseCfg_MBSSNumOfAdapter>
        <X_BROADCOM_COM_BaseCfg_Info>ap led wme 802.11d 802.11h mbss16 afterburner ampdu amsdurx amsdutx delaymode wmf rxchain_pwrsave radio_pwrsave </X_BROADCOM_COM_BaseCfg_Info>
        <X_BROADCOM_COM_BaseCfg_CoreRev>23</X_BROADCOM_COM_BaseCfg_CoreRev>
        <X_BROADCOM_COM_BaseCfg_Ver>5.60.120.11.cpe4.402</X_BROADCOM_COM_BaseCfg_Ver>
        <X_BROADCOM_COM_BaseCfg_MBSSIDSupported>1</X_BROADCOM_COM_BaseCfg_MBSSIDSupported>
        <X_BROADCOM_COM_BaseCfg_AburnSupported>1</X_BROADCOM_COM_BaseCfg_AburnSupported>
        <X_BROADCOM_COM_BaseCfg_AmpduSupported>1</X_BROADCOM_COM_BaseCfg_AmpduSupported>
        <X_BROADCOM_COM_BaseCfg_AmsduSupported>1</X_BROADCOM_COM_BaseCfg_AmsduSupported>
        <X_BROADCOM_COM_BaseCfg_WmfSupported>1</X_BROADCOM_COM_BaseCfg_WmfSupported>
        <X_BROADCOM_COM_VirtualIfCfg_EnableWmf>1</X_BROADCOM_COM_VirtualIfCfg_EnableWmf>
        <X_BROADCOM_COM_PhyType>n</X_BROADCOM_COM_PhyType>
        <X_CT-COM_Powerlevel>1</X_CT-COM_Powerlevel>
        <WEPKey instance="1">
          <WEPKey>1234567890123</WEPKey>
        </WEPKey>
        <WEPKey instance="2">
          <WEPKey>1234567890123</WEPKey>
        </WEPKey>
        <WEPKey instance="3">
          <WEPKey>1234567890123</WEPKey>
        </WEPKey>
        <WEPKey instance="4">
          <WEPKey>1234567890123</WEPKey>
        </WEPKey>
        <WEPKey nextInstance="5" ></WEPKey>
        <PreSharedKey instance="1">
        </PreSharedKey>
        <PreSharedKey nextInstance="2" ></PreSharedKey>
        <X_BROADCOM_COM_Wds>
          <Static instance="1">
          </Static>
          <Static instance="2">
          </Static>
          <Static instance="3">
          </Static>
          <Static instance="4">
          </Static>
          <Static nextInstance="5" ></Static>
        </X_BROADCOM_COM_Wds>
      </WLANConfiguration>

meisajun

        <PreSharedKey instance="1">
          <PreSharedKey>XXXXXXXX</PreSharedKey>
        </PreSharedKey>

把这个加进去就可以了,X,为任意8个ASCII字符.就是密码.

meisajun

<WLANConfiguration instance="2">
        <Enable>TRUE</Enable>
应该还要加上这句.才能开SSID2.

dipck

meisajun 发表于 2013-8-25 20:04
XXXXXXXX
        

试过了，不行

dipck

meisajun 发表于 2013-8-25 20:08
TRUE
应该还要加上这句.才能开SSID2.

删除了的效果是一样，都能打开。