设为首页收藏本站

宽带技术网

 找回密码
 注 册

QQ登录

只需一步,快速开始

扫一扫,访问微社区

查看: 1179|回复: 11

H118N TTL可以连接,但怎么都不能进入CFE,请教各位大神

[复制链接]
Decompressing...done
Init Arena
Init Devs.
Boot partition size = 131072(0x20000)
Found a 16MB ST compatible serial flash
Serial flash offset 00000000 size 128KB
Serial flash offset 00020000 size 640KB
Serial flash offset 000C0000 size 1KB
Serial flash offset 000C0100 size 3456KB
Serial flash offset 00420000 size 1KB
Serial flash offset 00420100 size 12128KB
Serial flash offset 00FF8000 size 32KB
et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 5.60.120.9
CPU type 0x19749: 530MHz
Tot mem: 32768 KBytes

Device eth0:  hwaddr 00-90-4C-01-02-00, ipaddr 192.168.1.254, mask 255.255.255.0
        gateway not set, nameserver not set
*** Press 1 means entering boot mode***
Press 2 means entering testing mode***
Press 3 means entering norm mode***
Hit key to stop autoboot: 00 Entering norm mode ...
foundVer = 2
****Try the second image...
Loader:raw Filesys:tftp Dev:eth0 File:: Options:(null)
Loading: Failed.
Could not load :: Timeout occured
Loader:raw Filesys:raw Dev:flash0.os1 File: Options:(null)
Loading: ....... 3756328 bytes read
Entry at 0x80001000
Closing network.
Starting program at 0x80001000
Linux version 2.6.21.5 (xialei@localhost.localdomain) (gcc version 4.2.3) #2 Wed Oct 24 17:27:26 CST 2012
Found chip type AI (0x18825357)
Chipc: rev 38, caps 0x10480109, chipst 0xd0a pmurev 9, pmucaps 0x28a42a09
No PLL init done for chip 5357 rev 2 pmurev 9
si_kattach done. ccrev = 38, wd_msticks = 32
Found a 16MB ST compatible serial flash
Serial flash device: name SFLASH 16384 kB, id 0x0000 size 16384KB
prom init
Check boot para cksum...
boot para cksum OK!
bootPara.runmode=3
errorepc f8dfffff
hnd_cpu_reset=8011dcf4
CPU revision is: 00019749
Total Flash size: 16384K with 256 sectors
Flash split 8 : AuxFS[1376256]
Determined physical RAM map:
memory: 02000000 @ 00000000 (usable)
On node 0 totalpages: 8192
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 4064 pages, LIFO batch:0
  Normal zone: 32 pages used for memmap
  Normal zone: 4064 pages, LIFO batch:0
Built 1 zonelists.  Total pages: 8128
Kernel command line: root=31:6 rw noinitrd console=ttyS0,115200
brcm mips: enabling icache and dcache...
Primary instruction cache 32kB, physically tagged, 4-way, linesize 32 bytes.
Primary data cache 32kB, 4-way, linesize 32 bytes.
Synthesized TLB refill handler (20 instructions).
Synthesized TLB load handler fastpath (32 instructions).
Synthesized TLB store handler fastpath (32 instructions).
Synthesized TLB modify handler fastpath (31 instructions).
PID hash table entries: 128 (order: 7, 512 bytes)
CPU: BCM5357 rev 2 at 530 MHz
Using 265.000 MHz high precision timer.
Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
Memory: 28556k/32768k available (2779k kernel code, 4212k reserved, 752k data, 136k init, 0k highmem)
KLOB Pool 1 Initialized: 1048576 bytes <0x80c00000 ... 0x80d00000>
Calibrating delay loop... 263.16 BogoMIPS (lpj=131584)
Mount-cache hash table entries: 512
pdt_cspkernel_init
NET: Registered protocol family 16
1192:57:47 [Klogctl][Info] [(1657)LogCtlInit] LogCtlInit begin
1192:57:47 [Klogctl][Info] [(1396)AddLogtab] AddLogtab: pLogTab=803705c0,wLogTabNum=64,dwLogTabIDBase = 0X00000000
1192:57:47 [Klogctl][Info] [(1463)AddLogOutModule] AddLogOutModule:OutputMode=0X00000200,ptLogProcSet=81057c48
1192:57:47 [Klogstdio][Info] [(1080)LogStdioProcInit] LogStdioProcInit
1192:57:47 [Klogctl][Info] [(1463)AddLogOutModule] AddLogOutModule:OutputMode=0X00000100,ptLogProcSet=81057c48
1192:57:47 [Klogfile][Info] [(2924)LogFileProcInit] LogFileProcInit
1192:57:47 [Klogfile][Info] [(2936)LogFileProcInit] g_dwUptime is 946684800
1192:57:47 [Klogctl][Info] [(1396)AddLogtab] AddLogtab: pLogTab=80371af0,wLogTabNum=2,dwLogTabIDBase = 0X00080000
1192:57:47 [Klogctl][Info] [(1512)SetLogOutputMode] SetLogOutputMode:bType=1,OutputMode=0X00000700
1192:57:47 [Klogctl][Info] [(1590)SetLogConf] SetLogConf OutputMode=0X00000100,pBuf=81057aa0,iLen=88
1192:57:47 [Klogfile][Info] [(2743)ProcLogConf] Set LOG_FILE_CONF_SET_PDTCONF
1192:57:47 [Klogfile][Info] [(2831)ProcLogConf] Set LogFileFormatTimestamp
1192:57:47 [Klogctl][Info] [(1723)LogCtlInit] LogCtlInit end
1192:57:47 [KLogCtl][Notice] [oss_logctl.c(321)ProcLog] System start!
1192:57:47 [Klogfile][Info] [(475)InitLogSaveBuff] InitLogSaveBuff
1192:57:47 [KMONITOR][Notice] [monitor.c(199)MonitorInit]  cspmonitor init... !  
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: no core
PCI: Fixing up bus 0
1192:57:47 [MIRROR][Notice] [cspmirror.c(674)MirrorInit]  CspMirror start init ...
1192:57:47 [KQOS][Info] [qos.c(249)CSPKernel_QC_In] Qos module init
NET: Registered protocol family 8
NET: Registered protocol family 20
Time: MIPS clocksource has been installed.
NET: Registered protocol family 2
ip_rt_init() start call CSP_alloc_large_system_hash
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
ip_rt_init() call CSP_alloc_large_system_hash end
TCP established hash table entries: 1024 (order: 0, 4096 bytes)
TCP bind hash table entries: 512 (order: -1, 2048 bytes)
TCP: Hash tables configured (established 1024 bind 512)
TCP reno registered
squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher
squashfs: LZMA suppport for slax.org by jro
JFFS2 version 2.2. (C) 2001-2006 Red Hat, Inc.
io scheduler noop registered (default)
fwflash_m module registering
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at MMIO 0x0 (irq = 8) is a 16550A
pflash: found no supported devices
Creating 9 MTD partitions on "sflash":
0x00000000-0x01000000 : "whole flash"
0x00000000-0x00020000 : "boot"
0x00020000-0x000c0000 : "config"
0x000c0000-0x00220000 : "kernel1"
0x00220000-0x00420000 : "fs1"
0x00420000-0x005d0000 : "kernel2"
0x005d0000-0x00bf0000 : "fs2"
0x00bf0000-0x00ff0000 : "ctfs"
0x00ff0000-0x01000000 : "nvram"
brcmboard: brcm_board_init entry
u32 classifier
    Actions configured
nf_conntrack version 0.5.0 (256 buckets, 2048 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
netfilter PSD loaded - (c) astaro AG
NET: Registered protocol family 1
NET: Registered protocol family 10
6WIND/LSIIT IPv6 multicast forwarding 0.1 plus PIM-SM/SSM with *BSD API
ip6_tables: (C) 2000-2006 Netfilter Core Team
NET: Registered protocol family 17
af_packet.c packet_init call register_netdevice_notifier
Bridge firewalling registered
br_init call register_netdevice_notifier
Ebtables v2.0 registered
NET: Registered protocol family 24
PPP Deflate Compression module registered
1192:57:47 [LEDKEYDRV][Info] [ledkey_mod.c(1722)LedkeymodInit] Ledkey_mod Driver Version 0.0.1.
1192:57:47 [LEDKEYDRV][Info] [ledkey_mod.c(1773)LedkeymodInit] watchdog enable!
1192:57:47 [TAGPARAM][Info] [tagparam_mod.c(1383)TagaramodInit] Tagaram module Driver Version 0.0.1.
1192:57:47 [TAGPARAM][Info] [tagparam_mod.c(1423)TagaramodInit] parse tag param success
1192:57:47 [km255][Info] [ver_info.c(349)ver_info_init] ver_info_init
tcVerInfo->bootWhichImg=2
bootPara.img_info_tbl[1].flashOffset=0x  420000
hw_ver=00
hw_vernum=0
sHardVersion=V1.0.4

----------cp0_errorepc == 0xf8dfffff
1192:57:47 [km255][Info] [ver_info.c(138)ReadInfoFromVer] ver_info_init
1192:57:47 [km255][Info] [ver_info.c(145)ReadInfoFromVer] ver_info_init
1192:57:47 [km255][Info] [ver_info.c(161)ReadInfoFromVer] wFirmwareForm is:0x2
1192:57:47 [KSWETH][Notice] [csp_ifinfo.c(191)csp_ifinfo_init] Initializing CSP IFinfo...
1192:57:47 [KSWETH][Warn] [csp_ifinfo.c(213)csp_ifinfo_init] No IFinfo in flash!
1192:57:47 [KSWETH][Notice] [sweth_core.c(3659)sweth_init] SW&ETH HAL driver initing!
1192:57:47 [KSWETH][Notice] [sweth_core.c(154)CreateSwEthObjs] Create SW & ETH objects
1192:57:47 [KSWETH][Notice] [sweth_core.c(170)CreateSwEthObjs] Failed to get SWITCH attr, iRet=-2
1192:57:47 [KSWETH][Info] [sweth_core.c(177)CreateSwEthObjs] nEmac = 1, nSw = 0, nEth=5.
1192:57:47 [KSWETH][Info] [sweth_core.c(336)CreateSwEthObjs] ETH obj0: PhyType = 1, Is_assoc_sw = 0, Emac = 0, Phy = 0
1192:57:47 [KSWETH][Info] [sweth_core.c(336)CreateSwEthObjs] ETH obj1: PhyType = 1, Is_assoc_sw = 0, Emac = 0, Phy = 1
1192:57:47 [KSWETH][Info] [sweth_core.c(336)CreateSwEthObjs] ETH obj2: PhyType = 1, Is_assoc_sw = 0, Emac = 0, Phy = 2
1192:57:47 [KSWETH][Info] [sweth_core.c(336)CreateSwEthObjs] ETH obj3: PhyType = 1, Is_assoc_sw = 0, Emac = 0, Phy = 3
1192:57:47 [KSWETH][Info] [sweth_core.c(336)CreateSwEthObjs] ETH obj4: PhyType = 1, Is_assoc_sw = 0, Emac = 0, Phy = 4
1192:57:47 [KFASTFORWARD][Info] [ff_api.c(44)cspFastL2HookRe] CSP_FF_L2_DEL_HOOK register ok.
1192:57:47 [KFASTFORWARD][Info] [ff_api.c(50)cspFastL2HookRe] CSP_FF_L2_AGE_HOOK register ok.
1192:57:47 [KFASTFORWARD][Info] [ff_api.c(56)cspFastL2HookRe] CSP_FF_L2_CLR_HOOK register ok.
1192:57:47 [KFASTFORWARD][Info] [ff_api.c(145)cspFastL3HookRe] CSP_FF_L3_DEL_HOOK register ok.
1192:57:47 [KFASTFORWARD][Info] [ff_api.c(151)cspFastL3HookRe] CSP_FF_L3_AGE_HOOK register ok.
1192:57:47 [KFASTFORWARD][Info] [ff_api.c(157)cspFastL3HookRe] CSP_FF_L3_CLR_HOOK register ok.
VFS: Mounted root (squashfs filesystem) readonly.
Freeing unused kernel memory: 136k freed
init started:  BusyBox v1.01 (2012.10.24-09:09+0000) multi-call binary
Starting pid 102, console /dev/ttyS0: '/etc/rc'
init normal mode!!!
Loading drivers and kernel modules...
lo up
Using /lib/modules/2.6.21.5/extra/bcm_enet.ko
bcm_enet: module license 'Proprietary' taints kernel.
et_module_init: msglevel set to 0x1
1192:57:49 [KSWETH][Notice] [bcm_emac_adapte(329)Register_bcm_em] Register BCM EMAC driver
1192:57:49 [KSWETH][Notice] [sweth_core.c(602)RegisterEmacDrv] Register EMAC driver
1192:57:49 [KSWETH][Notice] [sweth_core.c(443)InitSwEthObjs] Initialise SW & ETH objects
1192:57:49 [KSWETH][Warn] [sweth_core.c(1725)hal_set_port_ma] Driver do not support set MAC address!
1192:57:49 [KSWETH][Warn] [sweth_core.c(1725)hal_set_port_ma] Driver do not support set MAC address!
1192:57:49 [KSWETH][Warn] [sweth_core.c(1725)hal_set_port_ma] Driver do not support set MAC address!
1192:57:49 [KSWETH][Warn] [sweth_core.c(1725)hal_set_port_ma] Driver do not support set MAC address!
1192:57:49 [KSWETH][Warn] [sweth_core.c(1725)hal_set_port_ma] Driver do not support set MAC address!
et0: et_probe: bus 0 slot 1 func 0 irq 3
et0: et_probe: bus 0 slot 2 func 0 irq 4
PCI: Setting latency timer of device 0000:00:02.0 to 64
si_doattach: incoming bus is PCI but it's a lie, switching to SI devid:0x4715
Found chip type AI (0x18825357)
Chipc: rev 38, caps 0x10480109, chipst 0x502 pmurev 9, pmucaps 0x28a42a09
No PLL init done for chip 5357 rev 2 pmurev 9
bcmsw: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 5.60.120.9
======================bcmsw================================
eth0: MAC Address: 00:90:4C:01:02:00
eth1: MAC Address: 00:90:4C:01:02:00
eth2: MAC Address: 00:90:4C:01:02:00
eth3: MAC Address: 00:90:4C:01:02:00
eth4: MAC Address: 00:90:4C:01:02:00
KLOB extended to 2 pools
eth0 up
device eth0 entered promiscuous mode
Starting pid 145, console /dev/ttyS0: '/bin/sh'

BusyBox v1.01 (2012.10.24-09:09+0000) Built-in shell (ash)
Enter 'help' for a list of built-in commands.
# 1192:57:50 [FLASHRW][Info] [proc_file_mod.c(1201)file_open] open file: /proc/cfg/logconf
1192:57:50 [FLASHRW][Info] [proc_file_mod.c(1331)file_close] close file: /proc/cfg/logconf
1192:57:50 [FLASHRW][Info] [proc_file_mod.c(1201)file_open] open file: /proc/cfg/log
1192:57:50 [FLASHRW][Info] [proc_file_mod.c(1331)file_close] close file: /proc/cfg/log
1192:57:50 [User][Info] [db_shm_mgr.c(76)DBShmSrvInit] iShmId:0
1192:57:50 [User][Info] [db_shm_mgr.c(91)DBShmSrvInit] pShmBuf:60000000

..........以下还有很多,省略

就是不能进入 CFE>

发表于 2014-5-8 20:38:39 | 显示全部楼层
刚启动的时候一直按CTRL+C
 楼主| 发表于 2014-5-10 11:18:33 | 显示全部楼层
YES东 发表于 2014-5-8 20:38
刚启动的时候一直按CTRL+C

老大  试过的  还是不行啊

点评

检查你的ttl线是否接地还有设置是否正确  详情 回复 发表于 2014-5-12 10:04
发表于 2014-5-12 10:04:17 | 显示全部楼层
prc3 发表于 2014-5-10 11:18
老大  试过的  还是不行啊

检查你的ttl线是否接地还有设置是否正确
发表于 2014-6-9 12:39:08 | 显示全部楼层
注意开机是提示你键入什么,不一定是东哥说的快捷键。我就是别的键,不过可悲刷砖了对了兄弟有编程器么,你的是什么版本的。能帮我提取个编程器固件么?
发表于 2014-6-20 11:06:16 | 显示全部楼层
路过,赞一下

路过,赞一下

发表于 2014-6-28 20:19:32 | 显示全部楼层
按小数字键盘上的1
发表于 2014-7-29 09:16:43 | 显示全部楼层
直接捅菊花不就行了
发表于 2014-11-28 12:24:15 | 显示全部楼层
我也是是不能进入 CFE>
发表于 2015-2-23 14:17:52 | 显示全部楼层
ttl  连接顺序是怎么样的?
您需要登录后才可以回帖 登录 | 注 册

本版积分规则

QQ|Archiver|手机版|小黑屋|宽带技术网 ( 粤ICP备15054574号  

粤公网安备 44152102000001号

GMT+8, 2016-12-6 18:22 , Processed in 0.518392 second(s), 30 queries , Gzip On.

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

快速回复 返回顶部 返回列表