求助：ZXA10F460V2.0无法使用BusyBox『光猫FTTx技术交流区』

dyswhw 发表于 2013-8-4 15:25:41

求助：ZXA10F460V2.0无法使用BusyBox

设备型号ZXA10F460
设备标识号####
硬件版本V2.0
适用地区四川电信
软件版本V2.20.10P12S_sc
固件版本C252

主要症状：
1、能够登录，但未显示版BusyBox本号，显示结果如图1；
2、输入sh显示结果如图2；
3、输入sendcmd 1 DB p UserInfo，显示结果如图3；
其它命令也是如此
原因：可能是屏蔽了命令
请求帮助!

swcnchen 发表于 2013-8-8 10:28:00

V2.0的不能使用这种方法

dyswhw 发表于 2013-8-8 10:54:10

swcnchen 发表于 2013-8-8 10:28
V2.0的不能使用这种方法
有什么方法，敬请赐教!

swcnchen 发表于 2013-8-8 10:58:35

dyswhw 发表于 2013-8-8 10:54
有什么方法，敬请赐教!

现在手头没有这种机器，在拿陆telet后别进sh，执行dumpcfg看能否执行先

swcnchen 发表于 2013-8-8 10:59:03

dyswhw 发表于 2013-8-8 10:54
有什么方法，敬请赐教!

现在手头没有这种机器，在登陆telnet后别进sh，执行dumpcfg看能否执行先

dyswhw 发表于 2013-8-8 11:04:11

swcnchen 发表于 2013-8-8 10:59
现在手头没有这种机器，在登陆telnet后别进sh，执行dumpcfg看能否执行先

好的，回家试试试!

dyswhw 发表于 2013-8-8 17:59:50

swcnchen 发表于 2013-8-8 10:59
现在手头没有这种机器，在登陆telnet后别进sh，执行dumpcfg看能否执行先

能够执行dumpcfg，显示如下：
            <Priority>101</Priority>
         </List>
         <List instance="16">
            <PacketizationPeriod>20</PacketizationPeriod>
            <Priority>101</Priority>
         </List>
         <List nextInstance="17" ></List>
         </Codec>
         <Stats>
         <LineStatus>Idle</LineStatus>
         </Stats>
      </Line>
      <Line nextInstance="3" ></Line>
      <X_CT-COM_GlobalParameter>
         <IADIPAddr>3171970685</IADIPAddr>
         <IADNetMask>4294934528</IADNetMask>
         <IADDefaultGW>3171942401</IADDefaultGW>
         <PrimaryDNSServerIP>3657877644</PrimaryDNSServerIP>
         <PPPoEUsername></PPPoEUsername>
         <PPPoEPassword></PPPoEPassword>
      </X_CT-COM_GlobalParameter>
   </VoiceProfile>
   <VoiceProfile nextInstance="2" ></VoiceProfile>
   <PhyInterface instance="1">
      <Tests>
         <TestState></TestState>
         <TestSelector></TestSelector>
         <X_CT-COM_SimulateTest>
         <TestType></TestType>
         <CalledNumber></CalledNumber>
         <DailDTMFConfirmNumber></DailDTMFConfirmNumber>
         </X_CT-COM_SimulateTest>
      </Tests>
   </PhyInterface>
   <PhyInterface instance="2">
      <Tests>
         <TestState></TestState>
         <TestSelector></TestSelector>
         <X_CT-COM_SimulateTest>
         <TestType></TestType>
         <CalledNumber></CalledNumber>
         <DailDTMFConfirmNumber></DailDTMFConfirmNumber>
         </X_CT-COM_SimulateTest>
      </Tests>
   </PhyInterface>
   </VoiceService>
   <VoiceService nextInstance="2" ></VoiceService>
   <X_CT-COM_MWBAND>
   <TotalTerminalNumber>4</TotalTerminalNumber>
   </X_CT-COM_MWBAND>
</Services>
<X_CT-COM_UplinkQoS>
   <Mode>INTERNET,TR069,VOIP,IPTV</Mode>
   <Enable>TRUE</Enable>
   <Bandwidth>102400</Bandwidth>
   <App instance="1">
   <AppName>VOIP</AppName>
   <ClassQueue>2</ClassQueue>
   </App>
   <App instance="2">
   </App>
   <App instance="3">
   <AppName>VOIP</AppName>
   </App>
   <App instance="4">
   <ClassQueue>3</ClassQueue>
   </App>
   <App nextInstance="5" ></App>
   <Classification instance="1">
   <ClassQueue>3</ClassQueue>
   <type instance="1">
      <Type>LANInterface</Type>
      <Max>InternetGatewayDevice.LANDevice.1.LANEthernetInterfaceConfig.2</M
ax>
      <Min>InternetGatewayDevice.LANDevice.1.LANEthernetInterfaceConfig.2</M
in>
      <ProtocolList>TCP,UDP</ProtocolList>
   </type>
   <type nextInstance="2" ></type>
   </Classification>
   <Classification instance="2">
   <ClassQueue>2</ClassQueue>
   <type instance="1">
      <Type>LANInterface</Type>
      <Max>InternetGatewayDevice.LANDevice.1.LANEthernetInterfaceConfig.2</M
ax>
      <Min>InternetGatewayDevice.LANDevice.1.LANEthernetInterfaceConfig.2</M
in>
      <ProtocolList>TCP,UDP</ProtocolList>
   </type>
   <type nextInstance="2" ></type>
   </Classification>
   <Classification nextInstance="3" ></Classification>
   <PriorityQueue instance="1">
   <Enable>TRUE</Enable>
   <Priority>1</Priority>
   <Weight>40</Weight>
   </PriorityQueue>
   <PriorityQueue instance="2">
   <Enable>TRUE</Enable>
   <Priority>2</Priority>
   <Weight>30</Weight>
   </PriorityQueue>
   <PriorityQueue instance="3">
   <Enable>TRUE</Enable>
   <Priority>3</Priority>
   <Weight>20</Weight>
   </PriorityQueue>
   <PriorityQueue instance="4">
   <Enable>TRUE</Enable>
   <Priority>4</Priority>
   <Weight>10</Weight>
   </PriorityQueue>
   <PriorityQueue nextInstance="5" ></PriorityQueue>
</X_CT-COM_UplinkQoS>
<X_CT-COM_UserInfo>
   <UserName>DY4930036828</UserName>
   <Status>0</Status>
   <Result>1</Result>
   <ServiceName>VOICE,INTERNET,IPTV</ServiceName>
</X_CT-COM_UserInfo>
<X_BROADCOM_COM_NetworkConfig>
   <DNSIfName>ppp0_2.1140</DNSIfName>
</X_BROADCOM_COM_NetworkConfig>
<X_BROADCOM_COM_Firewall>
   <X_BROADCOM_COM_ProtocolSupportedCfg instance="1">
   <Type>HTTP</Type>
   <Name>tcp</Name>
   <Port>80</Port>
   <Outgoing>TRUE</Outgoing>
   </X_BROADCOM_COM_ProtocolSupportedCfg>
   <X_BROADCOM_COM_ProtocolSupportedCfg instance="2">
   <Type>DNS</Type>
   <Name>udp</Name>
   <Port>53</Port>
   <Outgoing>TRUE</Outgoing>
   </X_BROADCOM_COM_ProtocolSupportedCfg>
   <X_BROADCOM_COM_ProtocolSupportedCfg instance="3">
   <Type>FTP</Type>
   <Name>tcp</Name>
   <Port>21</Port>
   <Outgoing>TRUE</Outgoing>
   </X_BROADCOM_COM_ProtocolSupportedCfg>
   <X_BROADCOM_COM_ProtocolSupportedCfg instance="4">
   <Type>TELNET</Type>
   <Name>tcp</Name>
   <Port>23</Port>
   <Outgoing>TRUE</Outgoing>
   </X_BROADCOM_COM_ProtocolSupportedCfg>
   <X_BROADCOM_COM_ProtocolSupportedCfg instance="5">
   <Type>SMTP</Type>
   <Name>tcp</Name>
   <Port>25</Port>
   <Outgoing>TRUE</Outgoing>
   </X_BROADCOM_COM_ProtocolSupportedCfg>
   <X_BROADCOM_COM_ProtocolSupportedCfg instance="6">
   <Type>POP3</Type>
   <Name>tcp</Name>
   <Port>110</Port>
   <Outgoing>TRUE</Outgoing>
   </X_BROADCOM_COM_ProtocolSupportedCfg>
   <X_BROADCOM_COM_ProtocolSupportedCfg instance="7">
   <Type>NNTP</Type>
   <Name>tcp</Name>
   <Port>119</Port>
   <Outgoing>TRUE</Outgoing>
   </X_BROADCOM_COM_ProtocolSupportedCfg>
   <X_BROADCOM_COM_ProtocolSupportedCfg instance="8">
   <Type>ICMP</Type>
   <Name>icmp</Name>
   <Outgoing>TRUE</Outgoing>
   </X_BROADCOM_COM_ProtocolSupportedCfg>
   <X_BROADCOM_COM_ProtocolSupportedCfg instance="9">
   <Type>H323</Type>
   <Name>tcp</Name>
   <Port>1720</Port>
   <Outgoing>TRUE</Outgoing>
   </X_BROADCOM_COM_ProtocolSupportedCfg>
   <X_BROADCOM_COM_ProtocolSupportedCfg instance="10">
   <Type>T.120</Type>
   <Name>tcp</Name>
   <Port>1503</Port>
   <Outgoing>TRUE</Outgoing>
   </X_BROADCOM_COM_ProtocolSupportedCfg>
   <X_BROADCOM_COM_ProtocolSupportedCfg instance="11">
   <Type>SSH</Type>
   <Name>tcp</Name>
   <Port>22</Port>
   <Outgoing>TRUE</Outgoing>
   </X_BROADCOM_COM_ProtocolSupportedCfg>
   <X_BROADCOM_COM_ProtocolSupportedCfg instance="12">
   <Type>SNTP</Type>
   <Name>udp</Name>
   <Port>123</Port>
   <Outgoing>TRUE</Outgoing>
   </X_BROADCOM_COM_ProtocolSupportedCfg>
   <X_BROADCOM_COM_ProtocolSupportedCfg instance="13">
   <Type>RADIUS</Type>
   <Name>tcp</Name>
   <Port>1812</Port>
   <Outgoing>TRUE</Outgoing>
   </X_BROADCOM_COM_ProtocolSupportedCfg>
   <X_BROADCOM_COM_ProtocolSupportedCfg instance="14">
   <Type>SIP</Type>
   <Name>udp</Name>
   <Port>5060</Port>
   <Outgoing>TRUE</Outgoing>
   </X_BROADCOM_COM_ProtocolSupportedCfg>
   <X_BROADCOM_COM_ProtocolSupportedCfg instance="15">
   <Type>SNMP</Type>
   <Name>udp</Name>
   <Port>161</Port>
   <Outgoing>TRUE</Outgoing>
   </X_BROADCOM_COM_ProtocolSupportedCfg>
   <X_BROADCOM_COM_ProtocolSupportedCfg instance="16">
   <Type>RTSP</Type>
   <Name>udp</Name>
   <Port>554</Port>
   <Outgoing>TRUE</Outgoing>
   </X_BROADCOM_COM_ProtocolSupportedCfg>
   <X_BROADCOM_COM_ProtocolSupportedCfg nextInstance="17" ></X_BROADCOM_COM_P
rotocolSupportedCfg>
</X_BROADCOM_COM_Firewall>
<X_BROADCOM_COM_SrvControlCfg instance="1">
   <SrvName>HTTP</SrvName>
   <Protocol>TCP</Protocol>
   <DefaultPort>80</DefaultPort>
   <Port>80</Port>
   <LanAllow>TRUE</LanAllow>
   <WanAllow>TRUE</WanAllow>
</X_BROADCOM_COM_SrvControlCfg>
<X_BROADCOM_COM_SrvControlCfg instance="2">
   <SrvName>TELNET</SrvName>
   <Protocol>TCP</Protocol>
   <DefaultPort>23</DefaultPort>
   <Port>23</Port>
   <LanAllow>TRUE</LanAllow>
   <WanAllow>TRUE</WanAllow>
</X_BROADCOM_COM_SrvControlCfg>
<X_BROADCOM_COM_SrvControlCfg instance="3">
   <SrvName>SSH</SrvName>
   <Protocol>TCP</Protocol>
   <DefaultPort>22</DefaultPort>
   <Port>22</Port>
</X_BROADCOM_COM_SrvControlCfg>
<X_BROADCOM_COM_SrvControlCfg instance="4">
   <SrvName>FTP</SrvName>
   <Protocol>TCP</Protocol>
   <DefaultPort>21</DefaultPort>
   <Port>21</Port>
   <LanAllow>TRUE</LanAllow>
   <WanAllow>TRUE</WanAllow>
</X_BROADCOM_COM_SrvControlCfg>
<X_BROADCOM_COM_SrvControlCfg instance="5">
   <SrvName>TFTP</SrvName>
   <Protocol>UDP</Protocol>
   <DefaultPort>69</DefaultPort>
   <Port>69</Port>
   <LanAllow>TRUE</LanAllow>
   <WanAllow>TRUE</WanAllow>
</X_BROADCOM_COM_SrvControlCfg>
<X_BROADCOM_COM_SrvControlCfg instance="6">
   <SrvName>ICMP</SrvName>
   <Protocol>ICMP</Protocol>
   <LanAllow>TRUE</LanAllow>
   <WanAllow>TRUE</WanAllow>
</X_BROADCOM_COM_SrvControlCfg>
<X_BROADCOM_COM_SrvControlCfg instance="7">
   <SrvName>SNMP</SrvName>
   <Protocol>UDP</Protocol>
   <DefaultPort>161</DefaultPort>
   <Port>161</Port>
</X_BROADCOM_COM_SrvControlCfg>
<X_BROADCOM_COM_SrvControlCfg nextInstance="8" ></X_BROADCOM_COM_SrvControlC
fg>
<X_BROADCOM_COM_EponGlobal>
   <MacAddr>38:46:08:34:23:6F</MacAddr>
   <LlidsNum>1</LlidsNum>
   <FecCtrl>1</FecCtrl>
   <ResetChip>4294967295</ResetChip>
   <DebugEnable>4294967295</DebugEnable>
   <XcvrTxPowerEnable>4294967295</XcvrTxPowerEnable>
   <PonIssueDetect>4294967295</PonIssueDetect>
   <LaserAlwaysOn>4294967295</LaserAlwaysOn>
</X_BROADCOM_COM_EponGlobal>
<X_BROADCOM_COM_EponAuthGlobal>
   <AuthState>5</AuthState>
</X_BROADCOM_COM_EponAuthGlobal>
<X_BROADCOM_COM_EponAlarm>
   <AlarmId>4294967295</AlarmId>
   <AdminState>4294967295</AdminState>
   <Rising>4294967295</Rising>
   <Falling>4294967295</Falling>
</X_BROADCOM_COM_EponAlarm>
<X_BROADCOM_COM_CtcLoidAuth>
   <Loid>DY4930036828</Loid>
</X_BROADCOM_COM_CtcLoidAuth>
</InternetGatewayDevice>
</DslCpeConfig>
dump bytes allocated=98304 used=59045 >

swcnchen 发表于 2013-8-8 18:24:34

dyswhw 发表于 2013-8-8 17:59
能够执行dumpcfg，显示如下：
101

应该是你截取的信息无法完整截取，超密正常情况下在dumpcfg的前段，而你只截到了后段。
可以加设tftp服务器后用tftp上传cfg文件，可以完整查看。

hong1230 发表于 2014-2-26 22:51:15

swcnchen 发表于 2013-8-8 18:24
应该是你截取的信息无法完整截取，超密正常情况下在dumpcfg的前段，而你只截到了后段。
可以加设tftp服 ...

同版本同样问题,求详细方法,新手

f8949087456 发表于 2015-1-7 01:21:15

同版本为何我Telnet不上呢

页: [1]

宽带技术网's Archiver

求助：ZXA10F460V2.0无法使用BusyBox