升级后无线模块不能加载，怎样解决？
最近升级路由猫Home Plus Plus 500 S6307MPW-II固体，升级后只有路由功能了，无线不能使用，查看机器内信息如下：无线固件不能加载
下面是正常状况：
有没有人遇到这种情况，要怎样解决？
求大侠们了？
这是有线连接后的运行日志，其中的“eeprom ID”不匹配是怎么回事？
2002:9:8:12:0 DSL Polling Timer Started succesfully.
2002:9:8:12:0 Firewall NAT service started
2002:9:8:12:0 All PVC Channel is In-Use
2002:9:8:12:0 All PVC Channel is In-Use
2002:9:8:12:0 All PVC Channel is In-Use
2002:9:8:12:0 All PVC Channel is In-Use
2002:9:8:12:0 All PVC Channel is In-Use
2002:9:8:12:0 All PVC Channel is In-Use
2002:9:8:12:0 AP REPORT LOCK ACQUIRED
2002:9:8:12:0 wlan_handle_load_event - Acquired Lock
2002:9:8:12:0 MAC address : 00:74:04:ef:ff:45
2002:9:8:12:0 Bridge Created: br0
2002:9:8:12:0 Bridge Created: br1
2002:9:8:12:0 updateall_servers : No children found for conn:
2002:9:8:12:0 Bridge Created: br2
2002:9:8:12:0 WPA Authenticator Started
2002:9:8:12:0 Bridge Created: br3
2002:9:8:12:0 Bridge Created: br4
2002:9:8:12:0 Bridge Interface Added: eth0
2002:9:8:12:0 Bridge Interface Added: eth1
2002:9:8:12:0 Bridge Interface Added: eth2
2002:9:8:12:0 Bridge Interface Added: eth3
2002:9:8:12:0tr069: Deleayed Device Info First use Date set
2002:9:8:12:0 DSL Carrier is down
2002:9:8:12:0 EEPROM len 474
2002:9:8:12:0 ERROR: DIE ID Mismatch eeprom ID: 740158b8 3ad6121d TNETW ID: 080158f1 2fcf0f17
2002:9:8:12:0 ERROR: Validate EEPROM Image failed
2002:9:8:12:0 Error: Failed to get a valid EEPROM Image. AP is DOWN
2002:9:8:12:0 NVS_TFTP_LOAD is enabled to download the correct EEPROM image during next boot. Set TFTP Server Address using IPA_SVR env variable
2002:9:8:12:0 AP Releasing Lock
2002:9:8:12:0 ERROR:Unable to open /proc/wlan/hal/fwVer
2002:9:8:12:0 ERROR:Unable to open /proc/wlan/production/version
页:
[1]