宇明 发表于 2012-12-17 04:49:04

求助 求助 hg527-c TTL获取不到超级密码

v0.06 PLL w ln p08 zi
Solos 461x PP boot v1.5
SDRAM size = 0x2000000
Processor clock speed 264.0MHz
FLASH Chip ID: 207e
@@@@@@@@@@@@@Disable watchdog.
cd
Solos 461x Network boot v1.19 (00000000)(FLASH)
MAC 00:22:33:44:55:66
SDRAM 0x02000000 bytes
Phy reset line on GPIO 4
192.168.1.1
Phy reset line on GPIO 4
(Hold '*' during reset for prompt)

Check multicast upgrade packets
Boot from Ethernet Port
v0.06 PLL w ln p08 zipacket, boot normally!
Solos 461x PP boot v1.5
SDRAM size = 0x2000000
Processor clock speed 264.0MHz
FLASH Chip ID: 207e
--- Check Tag CRC success,System Type: DUAL.
Start up info: MAIN_S.
ulFsOffset: e0000ulFsLen: 3399680ulFsOffset: 917504
Finding flashfs partition...done.
PPB: image.a_magic = 0xea000006
PPB: image.a_text = 0x000012a0
PPB: image.a_data = 0x000b6990
PPB: image.a_bss = 0x0016e12c
PPB: image.a_syms = 0x00000000
PPB: image.a_entry = 0x00030020
PPB: image.a_trsize = 0x00000000
PPB: image.a_drsize = 0x00000000

Image 'image' is a Linux kernel
Trying to load initrd...none found
Calling Configure_NVS_FromFile.

Flash size is 0x01000000. sdram size = 0x02000000.
LZMA 4.05
init started:BusyBox v1.00 (2009.09.01-02:46+0000) multi-call binary
RCS DONE
Loading Conexant BSP...
BASE MAC ADDRESS 00:22:33:44:55:66
Starting Conexant drivers
. msc16 loaded
.starting task turbo_WhipTask
DSL MSC16 imem 4096, dmem 2048
DSL MSC16 version 1.3
.msc16_load_file returned 0
sram_buffer : 0xffa01d60 addr : 0x70001d60
Passing command buffer 70001d60 to MSC16
.
Conexant drivers started
Loading Wireless ...
Load CX50321 Reading True PDA ...
Creating Delt char device
Loading drivers and kernel modules...
131
Waiting for cli start!| enter the msg
\===enter the log
\TSP_DBGetPara ok ulPort = 23
-----------CLI_Init------------
ulRet=0 in CLI_Init
/
Cwmp initing...
CWMP version: ATP cwmp v2.5
bootok
Welcome Visiting HuaweiHome Gateway
Copyright by Huawei Technologies Co., Ltd.
Login:Error -2 writing a1 of port AutoSRA:Disable
WIRELESS is off
port_no -1 not surported, br:br0, port:wl0.0
device wl0.0 is not a slave of br0
port_no -1 not surported, br:br0, port:wl0.1
interface wl0.1 does not exist!
port_no -1 not surported, br:br0, port:wl0.2
interface wl0.2 does not exist!
port_no -1 not surported, br:br0, port:wl0.3
interface wl0.3 does not exist!
SIOCGIFFLAGS: Unknown error 19
SIOCGIFFLAGS: Unknown error 19
SIOCGIFFLAGS: Unknown error 19
Error while Setting SERVICESETError while Setting SERVICESETError while Setting
SERVICESET invalid rate , choosing auto mode
statusset or get BSS enabled status: up/down.
statusset or get BSS enabled status: up/down.
statusset or get BSS enabled status: up/down.

WIRELESS is on
SIOCGIFFLAGS: Unknown error 19
SIOCGIFFLAGS: Unknown error 19
SIOCGIFFLAGS: Unknown error 19
file open failed, trying default file.
Let's go boy... :p
[*] Get ethernetflags....
[*] Eth header is ready....
[*] Arp header is ready....
Let's go boy... :p
[*] Get ethernetflags....
[*] Eth header is ready....
[*] Arp header is ready....
device eth0 is not a slave of br0
Connction id is 4
acCmd : echo "L:vpi=88/vci=88/rfc1483=true/rfc1483.mode=Llcbridged/class=ubr/por
t=a1" > /proc/quantum/drv_ctl
acCmd : echo "V:vpi=88:vci=88:conid=4" > /proc/quantum/drv_ctl
Call the function for bunif interface
Starting OAM test
Starting OAM test
Connction id is 1
acCmd : echo "L:vpi=88/vci=89/rfc1483=true/rfc1483.mode=Llcbridged/class=ubr/por
t=a1" > /proc/quantum/drv_ctl
acCmd : echo "V:vpi=88:vci=89:conid=1" > /proc/quantum/drv_ctl
Call the function for bunif interface
Starting OAM test
Starting OAM test
Connction id is 1
acCmd : echo "L:vpi=88/vci=90/rfc1483=true/rfc1483.mode=Llcbridged/class=ubr/por
t=a1" > /proc/quantum/drv_ctl
acCmd : echo "V:vpi=88:vci=90:conid=1" > /proc/quantum/drv_ctl
Call the function for bunif interface
Starting OAM test
Starting OAM test
paed: w         wpanone_inNo IV counter file available, starting from zero
Got interface ifname wl0
V100R001C01 DNS Server V1.10
string = setoid wl0 10000002ssid CU_zdTW
RSSID :ssid set done CU_zdTW
WIRELESS is on
V100R001C01 DNS Server V1.10
wpa_supplicant: applet not found
Current sntp process is 932!
V100R001C01 SNTP Client V1.00
Bind failed: Unknown error 98
===bUsbconf=0====!
Current sntp process is 962!
V100R001C01 SNTP Client V1.00
DEVICE PIN: 49870206
wpa_supplicant: applet not found
!!Huawei
Password:
ATP>start
#
usbmount.c s00104966: Srcname=sda1
,length=5
conver name 2 pCDstName=usb1_1
cp/var/curcfg.xml/mnt/usb1_1
#
usbmount.c s00104966: Srcname=sda1
,length=5
conver name 2 pCDstName=usb1_1

宇明 发表于 2012-12-17 13:55:38

{:soso_e154:}{:soso_e154:}

宇明 发表于 2012-12-17 16:09:13

被分出来的文件是空的0字节

宇明 发表于 2012-12-17 16:10:10

有人吗？顶起来

fq5866 发表于 2012-12-17 19:58:41

{:soso_e100:}

lihao6419 发表于 2012-12-17 21:13:39

{:soso_e135:}

宇明 发表于 2012-12-17 22:52:13

有人吗？顶起来

宇明 发表于 2012-12-21 22:37:11

{:soso_e105:}{:soso_e106:}

复读生 发表于 2013-1-1 21:35:36

Load CX50321 Reading True PDA

文章转自于【宽带技术网】ChinAdsl.Net：https://www.chinadsl.net/thread-79198-1-1.html
我的，到这一句就不动了，下面还有一行乱码，只有电源灯是亮的，不知道怎样处理才能好。

复读生 发表于 2013-1-1 21:36:01

以前刷过，刷死机了，就不能用了
页: [1]
查看完整版本: 求助 求助 hg527-c TTL获取不到超级密码