D-LINK 2650BU刷机 不能进CFE，帮忙看看
Total memory used by CFE:0x80401000 - 0x805288B0 (1210544)Initialized Data: 0x8041DB60 - 0x8041FF30 (9168)
BSS Area: 0x8041FF30 - 0x804268B0 (27008)
Local Heap: 0x804268B0 - 0x805268B0 (1048576)
Stack Area: 0x805268B0 - 0x805288B0 (8192)
Text (code) segment: 0x80401000 - 0x8041DB5C (117596)
Boot area (physical): 0x00529000 - 0x00569000
Relocation Factor: I:00000000 - D:00000000
Board IP address : 192.168.1.1
Host IP address : 192.168.1.100
Gateway IP address :
Run from flash/host (f/h) : f
Default host run file name : vmlinux
Default host flash file name : bcm963xx_fs_kernel
Boot delay (0-9 seconds) : 1
Boot image (0=latest, 1=previous) : 0
Board Id (0-12) : CTNEW_DSL2650
Number of MAC Addresses (1-32) : 12
Base MAC Address : 00:1c:f0:c6:e9:df
PSI Size (1-64) KBytes : 48
Main Thread Number : 1
Wireless ssid : ChinaNet-VvQf
Wireless wpakey : hq3caesq
Serial number : 001CF0-3D200001CF0C6E9DF
*** Press any key to stop auto run (1 seconds) ***
Auto run second count down: 110
Booting from latest image (0xbe5e0000) ...
Code Address: 0x80010000, Entry Address: 0x80276018
Decompression OK!
Entry at 0x80276018
Closing network.
Starting program at 0x80276018
Linux version 2.6.8.1 (joan@mochow) (gcc version 3.4.2) #1 Fri Mar 28 10:41:42 CST 2008
prom init
CPU revision is: 0002a010
Determined physical RAM map:
memory: 01fa0000 @ 00000000 (usable)
On node 0 totalpages: 8096
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 4000 pages, LIFO batch:1
HighMem zone: 0 pages, LIFO batch:1
Built 1 zonelists
Kernel command line: root=31:0 ro noinitrd console=ttyS0,115200
brcm mips: enabling icache and dcache...
Primary instruction cache 16kB, physically tagged, 2-way, linesize 16 bytes.
Primary data cache 16kB 2-way, linesize 16 bytes.
PID hash table entries: 128 (order 7: 1024 bytes)
Using 150.000 MHz high precision timer.
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 29300k/32384k available (2012k kernel code, 3040k reserved, 439k data, 80k init, 0k highmem)
Calibrating delay loop... 299.00 BogoMIPS
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Checking for 'wait' instruction...unavailable.
NET: Registered protocol family 16
Parallel flash device: name AM29LV320MT, id 0x2201, size 16384KB
Total Flash size: 16384K with 128 sectors
File system address: 0xbe5e0100
Can't analyze prologue code at 80205924
SCSI subsystem initialized
usbcore: registered new driver hub
NTFS driver 2.1.15 .
JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc.
Initializing Cryptographic API
PPP generic driver version 2.4.2
NET: Registered protocol family 24
Using noop io scheduler
bcm963xx_mtd driver v1.0
JFFS2 mapped flash: Found 1 x16 devices at 0x0 in 16-bit bank
Amd/Fujitsu Extended Query Table at 0x0040
JFFS2 mapped flash: CFI does not contain boot bank location. Assuming top.
每次到这个界面
按任何按键都不行 我自己顶下，希望有缘人解答
页:
[1]