RG100A刷DL2760带CFE的固件挂了。。求助
RG100A 本来默认是刷的OPENWRT，刷带CFE的DL2760的固件挂了。刷前OPENWRT中系统信息：
Linux version 2.6.32.55 (lintel@EmbeddedLab) (gcc version 4.3.3 (GCC) ) #6 Wed Feb 1 01:43:45 CST 2012
Detected Broadcom 0x6358 CPU revision a1
CPU frequency is 300 MHz
64MB of RAM installed
registering 40 GPIOs
board_bcm963xx: CFE version: 1.0.37-10.3
刷后，RG100A灯全不亮，插网线亮，不能进入CFE的WEB界面。
TTL信息如下：
CFE version 1.0.37-102.9 for BCM96358 (32bit,SP,BE)
Build Date: Wed Jul 29 20:25:16 CST 2009 (kevin@BS5)
Copyright (C) 2000-2009 Broadcom Corporation.
Parallel flash device id 027a is not supported.
*** Board is not initialized properly ***
*** Upgrading NVRAM (version 0 to version 5) ***
*** Board is not initialized properly ***
Press:<enter> to use current value
'-' to go previous parameter
'.' to clear the current value
'x' to exit this command
96358VW2 ------- 0
96358VW ------- 1
96358GWVG ------- 2
96358IVWG ------- 3
96358SV ------- 4
96358ADWG ------- 5
Board Id (0-5) :
这里顺便怎么选，最后都是一块一块的代码跳，跳完就没反映了。
卡在cfe参数设置里面了，你参考：https://www.chinadsl.net/forum.php?mod=viewthread&tid=68774 多谢斑竹指点。
页:
[1]