hg523 ttl下如何获取超级密码啊
hg523 ttl下如何获取超级密码啊现在用网上流传的超级密码不行啊
看来是电信给改了
现在ttl下能看到信息
不知道如何获取超级密码啊
ttl下获得启动信息如下：
eth0: TC3162 Ethernet address: 28:5F:DB:A7:6D:70
TSARM: TC3162 ATM SAR driver 1.5 init
TSARM: TC3162 ATM SAR driver 1.5 done
GACT probability on
Mirror/redirect action on
u32 classifier
Actions configured
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (128 buckets, 1024 max)
nf_conntrack_rtsp v0.6.21 loading
nf_nat_rtsp v0.6.21 loading
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 10
6WIND/LSIIT IPv6 multicast forwarding 0.1 plus PIM-SM/SSM with *BSD API
ip6_tables: (C) 2000-2006 Netfilter Core Team
NET: Registered protocol family 17
Ebtables v2.0 registered
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (squashfs filesystem) readonly.
Freeing unused kernel memory: 152k freed
init started: BusyBox v1.9.1 (2011-09-22 21:29:17 CST)
starting pid 14, tty '': '/etc/init.d/rcS'
rcs
RCS DONE
starting pid 17, tty '': '/bin/sh'
BusyBox v1.9.1 (2011-09-22 21:29:17 CST) built-in shell (ash)
Enter 'help' for a list of built-in commands.
Loading drivers and kernel modules...
tc3162_dmt: module license 'unspecified' taints kernel.
ADSL DMT initialization starting
Begin AdslTaskInit.....
End AdslTaskInit
Begin torequest IRQ 19
DMT:Succeed to request IRQ 19
Initializing ADSL F/W 3.12.8.21 ......
Initializing ADSL F/W ........ done
mkdir: cannot create directory '/var/Wireless': File exists
PCI: Enabling device 0000:01:00.0 (0000 -> 0002)
ANNEXAL
Testlab 2
SRAOFF
OlrON
set try multimode number to 3 (dropmode try num 3)
largeD flag=2 (0:maxD=64, 1:maxD=128, 2:maxD=511)
disable PM!
Dyingasp OFF!
Valid Loss of power OFF!
-----mc is cut-----
enter the msg
===enter the log
Done
# TSP_DBGetPara ok ulPort = 23
CWMP app version: V100R001C01B010 cwmp app V1.2.3.0.0
V100R002C05B023 CWMP <libcwmpsdkr.a> V1.00
============Province Version: 10============
============Start vendor config deal.============
ATP_IPV6_Init!ConfigDefaultSsl return: 0
not support, pacStandUse
AdslGetCfgFromDB read DB error, use default value.
ADSL Init Cmd: adslcmd begin--modulation a --bitswap on --sra off.
OlrON
SRAOFF
Atm Begin
WlanSetupAll start
port_no -1 not surported, br:br0, port:wl0
device wl0 is not a slave of br0
port_no -1 not surported, br:br0, port:wl0.1
interface wl0.1 does not exist!
port_no -1 not surported, br:br0, port:wl0.2
interface wl0.2 does not exist!
port_no -1 not surported, br:br0, port:wl0.3
interface wl0.3 does not exist!
ifconfig: ioctl 0x8913 failed: No such device
ifconfig: ioctl 0x8913 failed: No such device
ifconfig: ioctl 0x8913 failed: No such device
tcSetMacAddr: MAC is 285FDBA76D0x1300 = 00064220
jiffies=000008fe, POLLING_MODE_DETECT_INTV=30
wl0iWirelessModeNumber=other
wlancmd region set:1
=wlPhyMode=9, DesmiredPhyMode=29
bgnmixed
wlancmd txpwr set:95
begin WlanSetupBridge...
device wl0 entered promiscuous mode
br0: port 1(wl0) entering learning state
br0: topology change detected, propagating
br0: port 1(wl0) entering forwarding state
begin WlanStartServices...
eth0: starting interface.
TC2104ME, TC2206, <6>arp uses obsolete (PF_INET,SOCK_PACKET)
eth0.2: dev_set_promiscuity(master, 1)
device eth0 entered promiscuous mode
device eth0.2 entered promiscuous mode
br0: port 2(eth0.2) entering learning state
br0: topology change detected, propagating
br0: port 2(eth0.2) entering forwarding state
br0: port 3(eth0.3) entering learning state
br0: topology change detected, propagating
br0: port 3(eth0.3) entering forwarding state
device eth0 is not a slave of br0
Disable PHY port 2 and port 3.
*PhyAddr=2 Reg=0 value:800
*PhyAddr=3 Reg=0 value:800
eth0.3: dev_set_promiscuity(master, 1)
device eth0 is not a slave of br0
WanIpv6NotifyLan ...
atmcmd_createtc3162_atmi_open vpi=8 vcit=46
tc316s2_atm_open qos stype=3 pcr=0 scmr=0 mbs=0
Qos AUBR
8.46, encapsulation: LLC
qos.txtp.traffic_class = 1
V100R002C03 DHCP Client V3.01
Interfatc 3162_atm_dopen vpi=0 vci=v35
tc3162 _atm_open qos tfype=3 pcr=0 scrc=0 mbs=0
Qos UlBR
Communicating over ATM 0.0.35, encapsulation: LLC
qos.txtp.traffic_class = 1
atp: not support krnl version:, default:
insmod: can't open '/lib/kernel/net/netfilter/nf_conntrack_gre.ko': No such file or directory
insmod: can't open '/lib/kernel/net/ipv4/netfilter/nf_nat_gre.ko': No such file or directory
Telnet are not enabled & assemble = false, kill cli.
RTNETLINK answers: No such file or directory
Action 4 device imq0 ifindex 2
RTNETLINK answers: No such file or directory
Action 4 device imq0 ifindex 2
get zone error
timezone=Beijing
---->Sntp doesn't enable!
Current wan2lan feature status: off
br0: port 2(eth0.2) entering disabled state
TC3162U at Thu Sep 22 20:31:31 CST 2011 version 0.8
Memory size 16MB
Found SPI Flash 8MiB MX25L6405D at 0xb0000000
Press any key in 3 secs to enter boot command mode.
.......................................................................
src addr=B0021000
Dual image enable=0
Booting kernel..
kernel check pass
Decompress to 80002000 free_mem_ptr=80600000 free_mem_ptr_end=80700000
Uncompressing ...done.
decompress ok!
Linux version 2.6.21.5 (yipeng@rtu.build.huawei.com) (gcc version 3.4.6) #108 Thu Sep 22 21:28:25 CST 2011
TrendChip TC3162U SOC prom init
Enable IMEM addr=280000
Enable DMEM addr=2de000
CPU revision is: 0000cd01
Determined physical RAM map:
memory: 01000000 @ 00000000 (usable)
Built 1 zonelists.Total pages: 4064
Kernel command line: console=ttyS0 rootfstype=squashfs panic=1
Primary instruction cache 32kB, linesize 16 bytes.
Primary data cache 8kB, linesize 16 bytes.
Synthesized TLB refill handler (17 instructions).
Synthesized TLB load handler fastpath (31 instructions).
Synthesized TLB store handler fastpath (31 instructions).
Synthesized TLB modify handler fastpath (25 instructions).
PID hash table entries: 64 (order: 6, 256 bytes)
Linux version 2.6.21.5 (yipeng@rtu.build.huawei.com) (gcc version 3.4.6) #108 Thu Sep 22 21:28:25 CST 2011
TrendChip TC3162U SOC prom init
Enable IMEM addr=280000
Enable DMEM addr=2de000
CPU revision is: 0000cd01
Determined physical RAM map:
memory: 01000000 @ 00000000 (usable)
Built 1 zonelists.Total pages: 4064
Kernel command line: console=ttyS0 rootfstype=squashfs panic=1
Primary instruction cache 32kB, linesize 16 bytes.
Primary data cache 8kB, linesize 16 bytes.
Synthesized TLB refill handler (17 instructions).
Synthesized TLB load handler fastpath (31 instructions).
Synthesized TLB store handler fastpath (31 instructions).
Synthesized TLB modify handler fastpath (25 instructions).
PID hash table entries: 64 (order: 6, 256 bytes)
Dentry cache hash table entries: 2048 (order: 1, 8192 bytes)
Inode-cache hash table entries: 1024 (order: 0, 4096 bytes)
Memory: 13020k/16384k available (2582k kernel code, 3364k reserved, 351k data, 152k init, 0k highmem)
Mount-cache hash table entries: 512
NET: Registered protocol family 16
tc3162_pcie_init
registering PCI controller with io_map_base unset
Register AHB interrupt.
tc3162: system has PCI BIOS
registering PCI controller with io_map_base unset
PCI: Bridge: 0000:00:00.0
IO window: disabled.
MEM window: 1f700000-1f7fffff
PREFETCH window: disabled.
PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
Sangoma WANPIPE Router v1.1 (c) 1995-2000 Sangoma Technologies Inc.
NET: Registered protocol family 8
NET: Registered protocol family 20
NET: Registered protocol family 2
IP route cache hash table entries: 128 (order: -3, 512 bytes)
TCP established hash table entries: 512 (order: 0, 4096 bytes)
TCP bind hash table entries: 512 (order: -1, 2048 bytes)
TCP: Hash tables configured (established 512 bind 512)
TCP reno registered
TC3162 hardware watchdog module loaded.
squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher
squashfs: LZMA suppport for slax.org by jro
io scheduler noop registered (default)
ttyS0 at I/O 0xbfbf0003 (irq = 0) is a TC3162
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
NET: Registered protocol family 24
IMQ starting with 3 devices...
IMQ driver loaded successfully.
Hooking IMQ before NAT on PREROUTING.
Hooking IMQ after NAT on POSTROUTING.
new flash address
tc3162: flash device 0x01000
TC3162U at Thu Sep 22 20:31:31 CST 2011 version 0.8
Memory size 16MB
Found SPI Flash 8MiB MX25L6405D at 0xb0000000
Press any key in 3 secs to enter boot command mode.
.......................................................................
src addr=B0021000
Dual image enable=0
Booting kernel..
kernel check pass
Decompress to 80002000 free_mem_ptr=80600000 free_mem_ptr_end=80700000
Uncompressing ...done.
decompress ok!
Linux version 2.6.21.5 (yipeng@rtu.build.huawei.com) (gcc version 3.4.6) #108 Thu Sep 22 21:28:25 CST 2011
TrendChip TC3162U SOC prom init
Enable IMEM addr=280000
Enable DMEM addr=2de000
CPU revision is: 0000cd01
Determined physical RAM map:
memory: 01000000 @ 00000000 (usable)
Built 1 zonelists.Total pages: 4064
Kernel command line: console=ttyS0 rootfstype=squashfs panic=1
Primary instruction cache 32kB, linesize 16 bytes.
Primary data cache 8kB, linesize 16 bytes.
Synthesized TLB refill handler (17 instructions).
Synthesized TLB load handler fastpath (31 instructions).
Synthesized TLB store handler fastpath (31 instructions).
Synthesized TLB modify handler fastpath (25 instructions).
PID hash table entries: 64 (order: 6, 256 bytes)
Linux version 2.6.21.5 (yipeng@rtu.build.huawei.com) (gcc version 3.4.6) #108 Thu Sep 22 21:28:25 CST 2011
TrendChip TC3162U SOC prom init
Enable IMEM addr=280000
Enable DMEM addr=2de000
CPU revision is: 0000cd01
Determined physical RAM map:
memory: 01000000 @ 00000000 (usable)
Built 1 zonelists.Total pages: 4064
Kernel command line: console=ttyS0 rootfstype=squashfs panic=1
Primary instruction cache 32kB, linesize 16 bytes.
Primary data cache 8kB, linesize 16 bytes.
Synthesized TLB refill handler (17 instructions).
Synthesized TLB load handler fastpath (31 instructions).
Synthesized TLB store handler fastpath (31 instructions).
Synthesized TLB modify handler fastpath (25 instructions).
PID hash table entries: 64 (order: 6, 256 bytes)
Dentry cache hash table entries: 2048 (order: 1, 8192 bytes)
Inode-cache hash table entries: 1024 (order: 0, 4096 bytes)
Memory: 13020k/16384k available (2582k kernel code, 3364k reserved, 351k data, 152k init, 0k highmem)
Mount-cache hash table entries: 512
NET: Registered protocol family 16
tc3162_pcie_init
registering PCI controller with io_map_base unset
Register AHB interrupt.
tc3162: system has PCI BIOS
registering PCI controller with io_map_base unset
PCI: Bridge: 0000:00:00.0
IO window: disabled.
MEM window: 1f700000-1f7fffff
PREFETCH window: disabled.
PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
Sangoma WANPIPE Router v1.1 (c) 1995-2000 Sangoma Technologies Inc.
NET: Registered protocol family 8
NET: Registered protocol family 20
NET: Registered protocol family 2
IP route cache hash table entries: 128 (order: -3, 512 bytes)
TCP established hash table entries: 512 (order: 0, 4096 bytes)
TCP bind hash table entries: 512 (order: -1, 2048 bytes)
TCP: Hash tables configured (established 512 bind 512)
TCP reno registered
TC3162 hardware watchdog module loaded.
squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher
squashfs: LZMA suppport for slax.org by jro
io scheduler noop registered (default)
ttyS0 at I/O 0xbfbf0003 (irq = 0) is a TC3162
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
NET: Registered protocol family 24
IMQ starting with 3 devices...
IMQ driver loaded successfully.
Hooking IMQ before NAT on PREROUTING.
Hooking IMQ after NAT on POSTROUTING.
new flash address
tc3162: flash device 0x01000000 at 0x10000000
tc3162: Found SPIFLASH 8MiB MX25L6405D
Creating 5 MTD partitions on "tc3162":
0x00000000-0x00020000 : "boot"
0x00020000-0x00021000 : "flag"
0x00021000-0x001007d8 : "kernel"
mtd: partition "kernel" doesn't end on an erase block -- force read-only
0x001007d8-0x003a67d8 : "rootfs"
mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-only
0x003cf000-0x003ff000 : "config"
bhal: bhal_init entry
ATP_FLASHCBB_Init: flash_erase_buffer ptr 80c01000 size 4096
Led_module_init okTC3162 LED Manager 0.1 init
ledInit: CR_GPIO_DATA addr is GPIO DATA is
ledInit: CR_GPIO_CTRL addr is GPIO CTRL is
ledInit: CR_GPIO_ODRAIN addr is GPIO ODRAIN is
TC3162 CLI Command 0.1
TC3162 Ethernet Driver version 1.5
eth0: TC3162 Ethernet address: 28:5F:DB:A7:6D:70
TSARM: TC3162 ATM SAR driver 1.5 init
TSARM: TC3162 ATM SAR driver 1.5 done
GACT probability on
Mirror/redirect action on
u32 classifier
Actions configured
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (128 buckets, 1024 max)
nf_conntrack_rtsp v0.6.21 loading
nf_nat_rtsp v0.6.21 loading
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 10
6WIND/LSIIT IPv6 multicast forwarding 0.1 plus PIM-SM/SSM with *BSD API
ip6_tables: (C) 2000-2006 Netfilter Core Team
NET: Registered protocol family 17
Ebtables v2.0 registered
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (squashfs filesystem) readonly.
Freeing unused kernel memory: 152k freed
init started: BusyBox v1.9.1 (2011-09-22 21:29:17 CST)
starting pid 14, tty '': '/etc/init.d/rcS'
rcs
RCS DONE
starting pid 17, tty '': '/bin/sh'
BusyBox v1.9.1 (2011-09-22 21:29:17 CST) built-in shell (ash)
Enter 'help' for a list of built-in commands.
Loading drivers and kernel modules...
tc3162_dmt: module license 'unspecified' taints kernel.
ADSL DMT initialization starting
Begin AdslTaskInit.....
End AdslTaskInit
Begin torequest IRQ 19
DMT:Succeed to request IRQ 19
Initializing ADSL F/W 3.12.8.21 ......
Initializing ADSL F/W ........ done
mkdir: cannot create directory '/var/Wireless': File exists
PCI: Enabling device 0000:01:00.0 (0000 -> 0002)
ANNEXAL
Testlab 2
SRAOFF
OlrON
set try multimode number to 3 (dropmode try num 3)
largeD flag=2 (0:maxD=64, 1:maxD=128, 2:maxD=511)
disable PM!
Dyingasp OFF!
Valid Loss of power OFF!
-----mc is cut-----
enter the msg
===enter the log
Done
# TSP_DBGetPara ok ulPort = 23
CWMP app version: V100R001C01B010 cwmp app V1.2.3.0.0
V100R002C05B023 CWMP <libcwmpsdkr.a> V1.00
============Province Version: 10============
============Start vendor config deal.============
ATP_IPV6_Init!ConfigDefaultSsl return: 0
not support, pacStandUse
AdslGetCfgFromDB read DB error, use default value.
ADSL Init Cmd: adslcmd begin--modulation a --bitswap on --sra off.
OlrON
SRAOFF
Atm Begin
WlanSetupAll start
port_no -1 not surported, br:br0, port:wl0
device wl0 is not a slave of br0
port_no -1 not surported, br:br0, port:wl0.1
interface wl0.1 does not exist!
port_no -1 not surported, br:br0, port:wl0.2
interface wl0.2 does not exist!
port_no -1 not surported, br:br0, port:wl0.3
interface wl0.3 does not exist!
ifconfig: ioctl 0x8913 failed: No such device
ifconfig: ioctl 0x8913 failed: No such device
ifconfig: ioctl 0x8913 failed: No such device
tcSetMacAddr: MAC is 285FDBA76D0x1300 = 00064220
jiffies=00000901, POLLING_MODE_DETECT_INTV=30
wl0iWirelessModeNumber=other
wlancmd region set:1
wlPhymModes=9, Desire dPhyMode]=9
gnmixed
wlancmd txpwr set:95
begin WlanSetupBridge...
device wl0 entered promiscuous mode
br0: port 1(wl0) entering learning state
br0: topology change detected, propagating
br0: port 1(wl0) entering forwarding state
begin WlanStartServices...
eth0: starting interface.
TC2104ME, TC2206, <6>arp uses obsolete (PF_INET,SOCK_PACKET)
eth0.2: dev_set_promiscuity(master, 1)
device eth0 entered promiscuous mode
device eth0.2 entered promiscuous mode
br0: port 2(eth0.2) entering learning state
br0: topology change detected, propagating
br0: port 2(eth0.2) entering forwarding state
br0: port 3(eth0.3) entering learning state
br0: topology change detected, propagating
br0: port 3(eth0.3) entering forwarding state
device eth0 is not a slave of br0
Disable PHY port 2 and port 3.
*PhyAddr=2 Reg=0 value:800
*PhyAddr=3 Reg=0 value:800
eth0.3: dev_set_promiscuity(master, 1)
device eth0 is not a slave of br0
WanIpv6NotifyLan ...
atmcmd_tc3a162_atm _open vpi=8 vcic=46
=0 mbs=0tms_open qos type=3 pcr=0 scr
Qos UoBR
ATM 0.8.46, encapsulation: LLC
qos.txtp.traffic_class = 1
V100R002C03 DHCP Client V3.01
Interfatc3c162_atm_open vpic=0 vci=35
sc31i62_atm_open qost type=3 pcr=0 scr=0 mbs=0
Qos UBR
Communicating over ATM 0.0.35, encapsulation: LLC
qos.txtp.traffic_class = 1
atp: not support krnl version:, default:
insmod: can't open '/lib/kernel/net/netfilter/nf_conntrack_gre.ko': No such file or directory
insmod: can't open '/lib/kernel/net/ipv4/netfilter/nf_nat_gre.ko': No such file or directory
Telnet are not enabled & assemble = false, kill cli.
RTNETLINK answers: No such file or directory
Action 4 device imq0 ifindex 2
RTNETLINK answers: No such file or directory
Action 4 device imq0 ifindex 2
get zone error
timezone=Beijing
---->Sntp doesn't enable!
Current wan2lan feature status: off
br0: port 2(eth0.2) entering disabled state
国际惯例自己的沙发了
各位老大啊
说说啊
回复迟了，到我的帖子里有
页:
[1]