土克拉 发表于 2011-9-22 19:34:02

RG100A-AA刷了RG100A-AA 改版固件（DLink_DSL-2760U_1.04+1.07）以后怎么脱机下载？

按这个https://www.chinadsl.net/forum.php?mod=viewthread&tid=53155&highlight=帖子里说的要设置NET端口号，和Transmission，setting.json文件里面的端口号一致

打开文件一看全英文？问下那个是端口？E文不行，请指教。该怎么设置？

谁给介绍个详细点的Transmission教程啊？

{
    "alt-speed-down": 50,
    "alt-speed-enabled": false,
    "alt-speed-time-begin": 540,
    "alt-speed-time-day": 127,
    "alt-speed-time-enabled": false,
    "alt-speed-time-end": 1020,
    "alt-speed-up": 50,
    "bind-address-ipv4": "0.0.0.0",
    "bind-address-ipv6": "::",
    "blocklist-enabled": false,
    "dht-enabled": true,
    "download-dir": "/var/transmission",
    "encryption": 1,
    "incomplete-dir": "/var/transmission",
    "incomplete-dir-enabled": false,
    "lazy-bitfield-enabled": true,
    "lpd-enabled": false,
    "message-level": 2,
    "open-file-limit": 32,
    "peer-limit-global": 240,
    "peer-limit-per-torrent": 60,
    "peer-port": 51413,
    "peer-port-random-high": 51415,
    "peer-port-random-low": 51413,
    "peer-port-random-on-start": false,
    "peer-socket-tos": 0,
    "pex-enabled": true,
    "port-forwarding-enabled": true,
    "preallocation": 1,
    "proxy": "",
    "proxy-auth-enabled": false,
    "proxy-auth-password": "",
    "proxy-auth-username": "",
    "proxy-enabled": false,
    "proxy-port": 80,
    "proxy-type": 0,
    "ratio-limit": 2.0000,
    "ratio-limit-enabled": false,
    "rename-partial-files": true,
    "rpc-authentication-required": false,
    "rpc-bind-address": "0.0.0.0",
    "rpc-enabled": true,
    "rpc-password": "{4cc0f9506402d31e2b3bff377c08a358ecddbb7d6Al2oVlF",
    "rpc-port": 9091,
    "rpc-username": "",
    "rpc-whitelist": "127.0.0.1",
    "rpc-whitelist-enabled": false,
    "script-torrent-done-enabled": false,
    "script-torrent-done-filename": "",
    "speed-limit-down": 100,
    "speed-limit-down-enabled": false,
    "speed-limit-up": 100,
    "speed-limit-up-enabled": false,
    "start-added-torrents": true,
    "trash-original-torrent-files": false,
    "umask": 18,
    "upload-slots-per-torrent": 14
}

土克拉 发表于 2011-9-22 19:37:40

补张图，这个怎么设置？

danchenzy 发表于 2011-9-23 13:12:36

端口是51413-----51425，，，你刷好路由，格式化硬盘，NTFS或者EXT3都可以，在硬盘里面放入OPT 文件，然后把移动硬盘接上路由器，重启下路由器，，打开IE 输入地址(记得一定要加https://)OK
    可以脱机了

土克拉 发表于 2011-9-25 16:37:13

danchenzy 发表于 2011-9-23 13:12 static/image/common/back.gif
端口是51413-----51425，，，你刷好路由，格式化硬盘，NTFS或者EXT3都可以，在硬盘里面放入OPT 文件，然后把 ...

输入地址 后面带9091吗？
https://192.168.1.1:9091吗？

michaeltam 发表于 2011-12-17 10:30:10

我现在用这个帖子里说的固件刷的，比较简单呢
脱机下载的2760固件https://www.chinadsl.net/thread-54182-1-1.html

zhenlunj 发表于 2012-1-30 23:59:03

页: [1]
查看完整版本: RG100A-AA刷了RG100A-AA 改版固件（DLink_DSL-2760U_1.04+1.07）以后怎么脱机下载？