[求助]TP-Link 89841挂了,请高手指点一下如何救活.谢谢.
我的路由刷固件导至除系统外其它都不能用了,4个LAN口灯几秒闪一下.TTL接入后的住处如下:Bootbase Version: VTC_SPI1.0 | 2008/06/12 14:28:26
RAM: Size = 2048 Kbytes
DRAM POST: Testing:2048K
OK
Found SPI Flash 512KiB W25X40 at 0xbfc00000
RAS Version: Dual_Core_20091225
System ID: *3.6.13.0(BE9.C3)3.11.2.173| 2009/12/24
Press any key to enter debug mode within 3 seconds.
............................................................
Copyright (c) 2001 - 2006 TrendChip Technologies Corp.
initialize ch = 0, ethernet address: fe:05:c5:e2:5b:94
Wan Channel init ........ done
Initializing ADSL F/W ........ done
ANNEXA
Press ENTER to continue...
Dyingasp OFF!
Valid Loss of power OFF!
set try multimode number to 3 (dropmode try num 3)
Valid SRAOFF
valid subcommands:
input line: w
Valid largeD flag=2 (0:maxD=64, 1:maxD=128, 2:maxD=511)
phyaddr=1 reg=0 value=2100
read back value=2100
Password:XXXX
Copyright (c) 2001 - 2006 TrendChip Technologies Corp.
tc> ?
Main commands:
sys led ether
etherd tcephydbg bridge ip
wan exit ? help
tc>
不知如何解决,望高手指点一下.谢谢. 按RESET到出厂状态试试 按了,没用,可以是刷固件出了问题,有没有用什么办法能直接从TTL中恢复固件(非TFTP方式,因为路由现在端口全不能用).不请指点一下,谢谢.
页:
[1]