DB120-WN刷机，刷过的，不管成功不成功都详情跟帖。此贴希望成为DB120-WN最权威之帖。
leos刷机成功固件 dlink 2760u 1.07 原始固件版本1.82
刷机方法：电脑网卡设IP地址为192.168.1.X，掩码：255.255.255.0，网关：192.168.1.1，运行：cmd，ping 192.168.1.1 -t 按住机盒底的RESET键，通电，ping到 Reply from 192.168.1.1: bytes=32 time=1ms TTL=100时放开RESET键，网页地址栏输入192.168.1.1固件升级页面，选择升级文件更新，大约3分钟更新完毕自动重启。
刷了这个固件电源灯开机时亮工作时不亮，USB灯长亮，其他灯正常。
我的是BCM公版，貌似现在天气热了，每天都掉线 这个可以双接入叠加带宽吗，我一条AD ，一条联通FTT+LAN 我的这样，拼不通
CFE version 1.0.37-6.5 for BCM96358 (32bit,SP,BE)
Build Date: Tue Jan 27 11:04:51 CST 2009 (root@MOD6538)
Copyright (C) 2000-2005 Broadcom Corporation.
Boot Address 0xbe000000
Initializing Arena.
Initializing Devices.
Parallel flash device: name AM29LV320MT, id 0x2201, size 16384KB
Unknown PHY type
CPU type 0x2A010: 300MHz, Bus: 133MHz, Ref: 64MHz
CPU running TP0
Total memory: 33554432 bytes (32MB)
Total memory used by CFE:0x80401000 - 0x80528320 (1209120)
Initialized Data: 0x8041DB70 - 0x8041FA20 (7856)
BSS Area: 0x8041FA20 - 0x80426320 (26880)
Local Heap: 0x80426320 - 0x80526320 (1048576)
Stack Area: 0x80526320 - 0x80528320 (8192)
Text (code) segment: 0x80401000 - 0x8041DB64 (117604)
Boot area (physical): 0x00529000 - 0x00569000
Relocation Factor: I:00000000 - D:00000000
*** Board is not initialized properly ***
Press:<enter> to use current value
'-' to go previous parameter
'.' to clear the current value
'x' to exit this command
Board Id Name (0-8)
96358M -------0
96358SV -------1
96358VW -------2
96358VW-16 -------3
96358GW-16 -------4
96358GW -------5
96358GW-A -------6
96358VW2 -------7
96358VW-A -------8 :7
很久之前折腾过了，早不知道忘了是怎么过来的了，只知道当时费了好多时间和精力去搞，弄过DLink的，现在目前用的是TP的固件。
Firmware Version: 1.4.0 Build 110620 Rel.52053n
Hardware Version: TD-W8960N v3 0x00000002
This information reflects the current status of your DSL connection.
Line Rate - Upstream (Kbps): 638
Line Rate - Downstream (Kbps): 4350
LAN IP Address: 10.10.10.10
Default Gateway: 58.248.237.1(ppp0)
Primary DNS Server: 210.21.4.130
Secondary DNS Server: 221.5.88.88
System Running time: 38 day(s) 04:35:10
页:
[1]