求助!D-LINK的DSL-2740B刷固件失败
手头有一台2740B无线有点问题，昨天刷了论坛里3.03的不带cfe的固件，刷不成功呢，现在开机4个LAN灯闪一下，然后就剩下一个插网线的口得灯亮着，其他都灭了。。。这怎么回事呀。。原来的参数：9635GW EU_3.01 CFE：1.0.37-6.5 4.174.64.12.cpe1.1
现在在CRT里的显示是：
CFE version 1.0.37-6.5 for BCM96358 (32bit,SP,BE)
Build Date: 涓 3鏈 7 19:02:03 CST 2007 (rome@fc6.ayecom.com)
Copyright (C) 2000-2005 Broadcom Corporation.
Boot Address 0xbfc00000
Initializing Arena.
Initializing Devices.
Parallel flash device: name MX29LV320AT, id 0x22a7, size 4096KB
Unknown PHY type
CPU type 0x2A010: 300MHz, Bus: 133MHz, Ref: 64MHz
Total memory: 8388608 bytes (8MB)
Total memory used by CFE:0x80401000 - 0x80527F00 (1208064)
Initialized Data: 0x8041D8C0 - 0x8041F600 (7488)
BSS Area: 0x8041F600 - 0x80425F00 (26880)
Local Heap: 0x80425F00 - 0x80525F00 (1048576)
Stack Area: 0x80525F00 - 0x80527F00 (8192)
Text (code) segment: 0x80401000 - 0x8041D8B8 (116920)
Boot area (physical): 0x00528000 - 0x00568000
Relocation Factor: I:00000000 - D:00000000
*** Board is not initialized properly ***
Press:<enter> to use current value
'-' to go previous parameter
'.' to clear the current value
'x' to exit this command
Board Id Name (0-7)
96358SV -------0
96358VW -------1
96358VW-10 -------2
96358VW-16 -------3
96358GW -------4
96358GW-16 -------5
96358M -------6
96358VW2 -------7 :4
Number of MAC Addresses (1-32) :012
Base MAC Address :
这还有的救么？麻烦各位高手指点一下
MAC怎么还没了呢？是要手动输入么？我看电路板上和无线模块上都有贴纸，有个MAC ID号，是把这个输进去么？{{gangzai3{{ 手动输入主板上的MAC之后是这样：
Number of MAC Addresses (1-32) :012
Base MAC Address :00:1B:11:19:2D:E3
Press any key to reset the board:
CFE version 1.0.37-6.5 for BCM96358 (32bit,SP,BE)
Build Date: 涓 3鏈 7 19:02:03 CST 2007 (rome@fc6.ayecom.com)
Copyright (C) 2000-2005 Broadcom Corporation.
Boot Address 0xbfc00000
Initializing Arena.
Initializing Devices.
Parallel flash device: name MX29LV320AT, id 0x22a7, size 4096KB
CPU type 0x2A010: 300MHz, Bus: 133MHz, Ref: 64MHz
Total memory: 33554432 bytes (32MB)
Total memory used by CFE:0x80401000 - 0x80527F00 (1208064)
Initialized Data: 0x8041D8C0 - 0x8041F600 (7488)
BSS Area: 0x8041F600 - 0x80425F00 (26880)
Local Heap: 0x80425F00 - 0x80525F00 (1048576)
Stack Area: 0x80525F00 - 0x80527F00 (8192)
Text (code) segment: 0x80401000 - 0x8041D8B8 (116920)
Boot area (physical): 0x00528000 - 0x00568000
Relocation Factor: I:00000000 - D:00000000
Board IP address : 192.168.1.1:ffffff00
Host IP address : 192.168.1.100
Gateway IP address :
Run from flash/host (f/h) : f
Default host run file name : vmlinux
Default host flash file name : bcm963xx_fs_kernel
Boot delay (0-9 seconds) : 1
Board Id Name : 96358GW
Psi size in KB : 24
Number of MAC Addresses (1-32) : 12
Base MAC Address : 00:1b:11:19:2d:e3
Ethernet PHY Type : Internal
Memory size in MB : 32
CMT Thread Number : 0
*** Press any key to stop auto run (1 seconds) ***
Auto run second count down: 0
Code Address: 0xD2695414, Entry Address: 0xc31bfdc8
Failed on decompression.Corrupted image?
web info: Waiting for connection on socket 0. 没有人用这款么{:soso_e134:} 又刷了两遍哪位大大给看看这个对么？
CFE> b
Press:<enter> to use current value
'-' to go previous parameter
'.' to clear the current value
'x' to exit this command
Board Id Name (0-7)
96358SV -------0
96358VW -------1
96358VW-10 -------2
96358VW-16 -------3
96358GW -------4
96358GW-16 -------5
96358M -------6
96358VW2 -------7 :4
Number of MAC Addresses (1-32) :12
Base MAC Address :00:1b:11:19:2d:e3
*** command status = 0
CFE> e n
Erase nvram? (y/n):y
*** command status = 0
CFE> i
Erase persisten storage data? (y/n):y
*** command status = 0
CFE> 最后输入“r”回车以后是这些呢
CFE> i
Erase persisten storage data? (y/n):y
*** command status = 0
CFE> r
Code Address: 0x3BB90207, Entry Address: 0x1855334b
Failed on decompression.Corrupted image?
*** command status = -1
CFE>
这是个啥意思呀，是不是哪里出问题了呀，拜托哪位指点指点{:soso_e183:}{:soso_e149:}
你哪里来的固件？改版的吗？ y06b24 发表于 2011-5-26 22:33 static/image/common/back.gif
你哪里来的固件？改版的吗？
坛子里找的就是这个
https://www.chinadsl.net/forum.php?mod=viewthread&tid=44121&highlight=2740b%2B3.03 128K的固件呀。你最好下原版的固件刷。 上哪能下到呢，好多下载站都打不开呀。。。
页:
[1]
2