JTAG高手进来看看，DSL-2650BU升级64MB内存后的错误信息
DSL-2650BU升级64MB内存后，在TTL里经常看到错误，就打算通过JTAG刷下CFE再刷固件，
下面是刷CFE的错误信息，请高手看下
*** You Selected to Flash the CFE.BIN ***
=========================
Flashing Routine Started
=========================
Total Blocks to Erase: 2
Erasing block: 1 (addr = 1E000000)...Done
Erasing block: 2 (addr = 1E020000)...Done
Loading CFE.BIN to Flash Memory...
DMA Read(x2) Addr = 1e00df3aData = (00000000)ERROR ON READ
DMA Read(x2) Addr = 1e00e1ceData = (fd2bc7cc)ERROR ON READ
DMA Read(x2) Addr = 1e00e1ceData = (00000000)ERROR ON READ
DMA Read(x2) Addr = 1e00e254Data = (001c001c)ERROR ON READ
DMA Write(x2) Addr = 1e000aaaData = ERROR ON WRITE
DMA Write(x2) Addr = 1e000554Data = ERROR ON WRITE
DMA Write(x2) Addr = 1e000aaaData = ERROR ON WRITE
DMA Write(x2) Addr = 1e00e256Data = ERROR ON WRITE
DMA Read(x2) Addr = 1e00e256Data = (00000000)ERROR ON READ
DMA Read(x2) Addr = 1e00e866Data = (fd2bc7cc)ERROR ON READ
DMA Read(x2) Addr = 1e00e884Data = (00000000)ERROR ON READ
DMA Read(x2) Addr = 1e00e8fcData = (00000000)ERROR ON READ
DMA Read(x2) Addr = 1e00eb1eData = (00000000)ERROR ON READ
Done(CFE.BIN loaded into Flash Memory OK)
=========================
Flashing Routine Complete
=========================
elapsed time: 183 seconds
*** REQUESTED OPERATION IS COMPLETE ***
是不是内存有虚焊？还是其他的原因，先谢了
顶上去，请大家帮忙分析下 bpxyz 发表于 2011-4-16 11:05 static/image/common/back.gif
好像是因为flash没认正确的原因，我把CFE高挂了，用jtag刷CFE的时候，也有类似提示。
我的应该不是那个问题，我之前通过JTAG刷过CFE
flash没认正确，可以在通电的瞬间执行刷新命令就可以了
页:
[1]