gary9912 发表于 2011-4-6 09:23:25

刷机，并非难事。

q411 发表于 2011-4-6 22:04:46

回复 MINE 的帖子

改版式的。。大哥

q411 发表于 2011-4-6 22:12:07

回复 sniper99999 的帖子

这个固件就是我的那种。。2760改固件1.04

能上网了。。。。IP两个路由也同处一个网段.做了端口映射了。但是就是不能下载。也不知道问题在哪里。。只好求大侠们了。
-----------------------------------------------------------------------------------------------------------------
Device Info

Model Name:        DSL-2760U
Board ID:        96358VW2
Software Version:        RU_1.04
Bootloader (CFE) Version:        1.0.37-102.9
Release Date:        Sep. 05, 2010
Wireless Driver Version:        5.10.85.0.cpe4.402.0
-----------------------------------------------------------------------------------------------------------------
This information reflects the current status of your DSL connection.

Line Rate - Upstream (Kbps):       
Line Rate - Downstream (Kbps):       
LAN IPv4 Address:        144.155.1.2
Default Gateway:        144.155.1.1
Primary DNS Server:        192.168.0.1
Secondary DNS Server:        192.168.0.1
Date/Time:        Sat Jan 1 00:51:04 2000
-----------------------------------------------------------------------------------------------------------------
Local Area Network (LAN) Setup
Configure the DSL Router IP Address and Subnet Mask for LAN interface.GroupName
IP Address:       
Subnet Mask:       
Enable IGMP Snooping
Disable DHCP Server
Enable DHCP Server
       Start IP Address:       
       End IP Address:       
       Leased Time (hour):       
       Static IP Lease List: (A maximum 32 entries can be configured)
MAC Address        IP Address        Remove
            
-----------------------------------------------------------------------------------------------------------------
NAT -- Port Triggering Setup

Some applications require that specific ports in the Router's firewall be opened for access by the remote parties. Port Trigger dynamically opens up the 'Open Ports' in the firewall when an application on the LAN initiates a TCP/UDP connection to a remote party using the 'Triggering Ports'. The Router allows the remote party from the WAN side to establish new connections back to the application on the LAN side using the 'Open Ports'. A maximum 32 entries can be configured.
Application Name        Trigger        Open        WAN Interface        Remove
Protocol        Port Range        Protocol        Port Range
Start        End        Start        End
Transmission        TCP        51413        51419        TCP        51413        51419        eth1.2.4094
-----------------------------------------------------------------------------------------------------------------


Test your ENET(1-4) Connection:       PASS        Help
Test your eth1 Connection:       PASS        Help
Test your eth1.3 Connection:       FAIL        Help
Test your eth1.4 Connection:       PASS       
Test your eth1.5 Connection:       FAIL
Test your USB Connection:        PASS        
Test your Wireless Connection:        PASS        
Test the connection to your Internet service provider
Ping default gateway:        PASS        
Ping primary Domain Name Server:        FAIL


q411 发表于 2011-4-6 22:17:46

下载软件提示无反应

q411 发表于 2011-4-6 23:00:12

回复 gary9912 的帖子

大侠风范。。。小弟甘拜下风。。刷有有风险。。

q411 发表于 2011-4-7 00:39:38

晚上没事。继续出来找大侠..

sniper99999 发表于 2011-4-7 09:02:38

回复 q411 的帖子

你的DNS写错了，绝对不会是192.168.0.1的，这个是本地LAN地址。
好好找找你们当地的DNS地址填写进去吧
看看你贴的这些最后三句
Test the connection to your Internet service provider：测试于网络连接
Ping default gateway:      PASS      网关：通过
Ping primary Domain Name Server:      FAILDNS地址：不通过

你的DNS错了，改改吧

q411 发表于 2011-4-8 01:07:41

没错。。我的上级LAN DNS就是开192.168.0.1

q411 发表于 2011-4-8 01:12:31

没错。。我的上级LAN DNS就是开192.168.0.1

IP地址：        192.168.0.3        动态IP
子网掩码：        255.255.255.0       
网关：        192.168.0.1          
DNS 服务器：        192.168.0.1 , 0.0.0.0

q411 发表于 2011-4-8 01:13:22

回复 sniper99999 的帖子

没错。。我的上级LAN DNS就是开192.168.0.1

IP地址：        192.168.0.3        动态IP
子网掩码：        255.255.255.0       
网关：        192.168.0.1          
DNS 服务器：        192.168.0.1 , 0.0.0.0
页: 1 [2] 3
查看完整版本: 花钱找大侠。求DB120WG D-LINK2760改固件LAN上网设置