求助，刷新WAG325N固件，现在变砖了,大家帮忙看下，如何处理
本帖最后由 smallfish001 于 2011-2-13 17:26 编辑前两天在论坛下了13版的固件，就开刷了，进度条到100%后，电源灯还是红绿闪， WEB登录后看到的是乱码，又等了5分钟吧，WEB登录后看到的就正常了，但是固件还是12的，很奇怪，我就没再等，直接断电重启猫了，结果变砖了，郁闷死！
之前从11刷到过12，这次不知道怎么操作的，竟然变砖了，13版的固件应该没有问题，有人刷成功了，大家帮我看下哪里错了。
现在TTL能进CFE，但是不知道怎么修复，有高手请指点下，谢了，
用TTL连上后，SecureCRT显示如下：
CFE version 1.0.37-5.4 for BCM96358 (32bit,SP,BE)
Build Date: 浜?11鏈? 7 17:06:48 CST 2006 (wanles@localhost.localdomain)
Copyright (C) 2000-2005 Broadcom Corporation.
Boot Address 0xbf800000
Initializing Arena.
Initializing Devices.
Parallel flash device: name EON FLASH, id 0x0000, size 8192KB
CPU type 0x2A010: 300MHz, Bus: 133MHz, Ref: 64MHz
Total memory: 33554432 bytes (32MB)
Total memory used by CFE:0x80401000 - 0x80527450 (1205328)
Initialized Data: 0x8041D1C0 - 0x8041EBD0 (6672)
BSS Area: 0x8041EBD0 - 0x80425450 (26752)
Local Heap: 0x80425450 - 0x80525450 (1048576)
Stack Area: 0x80525450 - 0x80527450 (8192)
Text (code) segment: 0x80401000 - 0x8041D1BC (115132)
Boot area (physical): 0x00528000 - 0x00568000
Relocation Factor: I:00000000 - D:00000000
Board IP address : 192.168.1.1
Host IP address : 192.168.1.100
Gateway IP address :
Run from flash/host (f/h) : f
Default host run file name : vmlinux
Default host flash file name : bcm963xx_fs_kernel
Boot delay (0-9 seconds) : 1
Board Id Name : 96358GW
Psi size in KB : 24
Number of MAC Addresses (1-32) : 10
Base MAC Address : 00:1d:7e:ad:fd:ad
Ethernet PHY Type : Internal
Memory size in MB : 32
CMT Thread Number : 0
*** Press any key to stop auto run (1 seconds) ***
Auto run second count down: 0
Code Address: 0xFF00FF45, Entry Address: 0xc0959e00
Failed on decompression.Corrupted image?
web info: Waiting for connection on socket 0.
CFE>
顶上去，请高手帮看下，快急死了 顶上去，实在不行，就准备JTAG了
页:
[1]