请问hg522 C芯片可以刷什么固件，有DDNS和端口映射???
有修改方法也可以，谢谢!设备型号: EchoLife HG522
设备标识号: 001E10-3C200001E10F94BC1
硬件版本: HG52MAGS
软件版本: HG522V100R001C02B029_HBCT
批次编码: CWC2P1.029.E254142_HBCT
猫可用密码：
WEB界面
telecomadmin的超级用户，默认密码为nE7jA%5m
Telnet密码
TelnetUserName="!!Huawei"
TelnetPassword="@HuaweiHgw"
---------------------------------------------
telnet已经开启
进入telnel后，输入start可进sh
Welcome Visiting HuaweiHome Gateway
Copyright by Huawei Technologies Co., Ltd.
Login:!!Huawei
Password:
ATP>start
# ls
bin etc html lib mnt root tmp var
dev home isfs linuxrcproc sbin usr
#
# cd var
#
# ls
WLSHibernate fs pda url_filter
cache ftp prsite.conf usb
conf group respawnd vport_result
ct hosts respawnd.lck wan
curcfg.xml igmp run wlan_start.lck
cwmp.conf lan state wsccmd.lck
dnsmasq.conf log tempconf.xml zebra
dsp_trace.txt paed.lck tmp
etc passwd udhcpd
#
#
连TTL线看到的 启动信息
TTL波特率必须设置为38400，其他设置一样
v0.06 PLL w ln p08 zi
Solos 461x PP boot v1.5
SDRAM size = 0x2000000
Processor clock speed 264.0MHz
FLASH Chip ID: 017e
@@@@@@@@@@@@@Disable watchdog.
cd
Solos 461x Network boot v1.19 (00000000)(FLASH)
MAC 00:22:33:44:55:66
SDRAM 0x02000000 bytes
Phy reset line on GPIO 4
192.168.1.1
Phy reset line on GPIO 4
(Hold '*' during reset for prompt)
Check multicast upgrade packets
Boot from Ethernet Port
v0.06 PLL w ln p08 zipacket, boot normally!
Solos 461x PP boot v1.5
SDRAM size = 0x2000000
Processor clock speed 264.0MHz
FLASH Chip ID: 017e
--- Check Tag CRC success,System Type: DUAL.
Start up info: MAIN_S.
ulFsOffset: e0000ulFsLen: 3444736ulFsOffset: 917504
Finding flashfs partition...done.
PPB: image.a_magic = 0xea000006
PPB: image.a_text = 0x000012a0
PPB: image.a_data = 0x000b6970
PPB: image.a_bss = 0x0016e6bc
PPB: image.a_syms = 0x00000000
PPB: image.a_entry = 0x00030020
PPB: image.a_trsize = 0x00000000
PPB: image.a_drsize = 0x00000000
Image 'image' is a Linux kernel
Trying to load initrd...none found
Calling Configure_NVS_FromFile.
Flash size is 0x01000000. sdram size = 0x02000000.
LZMA 4.05
init started:BusyBox v1.00 (2009.05.14-11:20+0000) multi-call binary
RCS DONE
Loading Conexant BSP...
BASE MAC ADDRESS 00:22:33:44:55:66
Starting Conexant drivers
. msc16 loaded
.starting task turbo_WhipTask
DSL MSC16 imem 4096, dmem 2048
DSL MSC16 version 1.3
.msc16_load_file returned 0
sram_buffer : 0xffa01d60 addr : 0x70001d60
Passing command buffer 70001d60 to MSC16
.
Conexant drivers started
Loading Wireless ...
Load CX50221 Reading True PDA ...
Creating Delt char device
Loading drivers and kernel modules...
131
Waiting for cli start!- enter the msg
/===enter the log
-TSP_DBGetPara ok ulPort = 23
-----------CLI_Init------------
\ulRet=0 in CLI_Init
|
Cwmp initing...
CWMP version: ATP cwmp v2.5
bootok
Welcome Visiting HuaweiHome Gateway
Copyright by Huawei Technologies Co., Ltd.
Login:Error -2 writing a1 of port AutoSRA:Disable
FILE: mid.c, LINE: 416
midcom:core program return, pid:186, continue...
FILE: mid.c, LINE: 435
Enter into func:MidCom_MngTaskStart
FILE: mid.c, LINE: 1086
Enter into func:Mid_ProcessTask
FILE: mid.c, LINE: 486
Enter into func:Mid_Connect
FILE: mid.c, LINE: 509
connect to midcomsystem server fail:2
FILE: mid.c, LINE: 1091
connect to midcomsystem server fail
FILE: mid.c, LINE: 478
should not be here!
setoid wl0 17000008 long 120
WIRELESS is off
port_no -1 not surported, br:br0, port:wl0.0
device wl0.0 is not a slave of br0
port_no -1 not surported, br:br0, port:wl0.1
interface wl0.1 does not exist!
port_no -1 not surported, br:br0, port:wl0.2
interface wl0.2 does not exist!
port_no -1 not surported, br:br0, port:wl0.3
interface wl0.3 does not exist!
SIOCGIFFLAGS: Unknown error 19
SIOCGIFFLAGS: Unknown error 19
SIOCGIFFLAGS: Unknown error 19
Error while Setting SERVICESETError while Setting SERVICESETError while Setting SERVICESET
invalid rate , choosing auto mode
statusset or get BSS enabled status: up/down.
statusset or get BSS enabled status: up/down.
statusset or get BSS enabled status: up/down.
WIRELESS is on
SIOCGIFFLAGS: Unknown error 19
SIOCGIFFLAGS: Unknown error 19
SIOCGIFFLAGS: Unknown error 19
file open failed, trying default file.
Let's go boy... :p
[*] Get ethernetflags....
[*] Eth header is ready....
[*] Arp header is ready....
Let's go boy... :p
[*] Get ethernetflags....
[*] Eth header is ready....
[*] Arp header is ready....
device eth0 is not a slave of br0
paed: w wpanone_inNo IV counter file available, starting from zero
V100R001C01 DNS Server V1.10
Got interface ifname wl0
mirrorcms.c line 468 func code ulLan!
mirrorcms.c line 128 func code acCmd echo "PN:00" >
/proc/quantum/drv_ctl!
===bUsbconf=1====!
temp=0==CfgFilePath=
wpa_supplicant: applet not found
WIRELESS is on
string = setoid wl0 10000002ssid ChinaNet-Chen
RSSID :ssid set done ChinaNet-Chen
DEVICE PIN: 17395670
wpa_supplicant: applet not found
页:
[1]