大亚DB120-B1刷成砖 请高手赐教
在WEB下刷bcm96358GW_1.3_96358VW2这个文件 刷后192.168.1.1不能登入 lan1--lan3灯和电源2个USB灯交替闪烁请高手指点一下 谢谢了 qq3264734 俺的也成转了，期望高手解答 我按照教程用电信3.1版不带CFE的一次刷成功。https://www.chinadsl.net/thread-44482-1-1.html 我刷成公版后 不会设置 又在网页刷电信原版 现在彻底变砖了 只有电源和上网灯亮进超级终端 要填写很多信息后 能进cFE 就是刷不进去固件 高手救我啊
试一下cfe还活着不？活着就好办 本帖最后由 sanyuan410 于 2011-1-23 20:23 编辑
CFE version 1.0.37-10.3 for BCM96358 (32bit,SP,BE)
Build Date: 二1月 29 07:41:15 CST 2008 (root@ZTJ)
Copyright (C) 2000-2006 Broadcom Corporation.
Boot Address 0xbe000000
Initializing Arena.
Initializing Devices.
Parallel flash device id 227a is not supported.
*** Board is not initialized properly ***
Press:<enter> to use current value
'-' to go previous parameter
'.' to clear the current value
'x' to exit this command
96358VW2 ------- 0
96358VW ------- 1
96358GWVG ------- 2
96358MV2G ------- 3
96358M ------- 4
96358B ------- 5
96358BGWE_OEM1 ------- 6
96359PONG ------- 7
96358SV ------- 8
96358VW2_b20 ------- 9
Board Id (0-9) :
现在启动猫连接超级终端就是这样的 要填写一串数字
CFE version 1.0.37-10.3 for BCM96358 (32bit,SP,BE)
Build Date: 二1月 29 07:41:15 CST 2008 (root@ZTJ)
Copyright (C) 2000-2006 Broadcom Corporation.
Boot Address 0xbe000000
Initializing Arena.
Initializing Devices.
Parallel flash device id 227a is not supported.
*** Board is not initialized properly ***
Press:<enter> to use current value
'-' to go previous parameter
'.' to clear the current value
'x' to exit this command
96358VW2 ------- 0
96358VW ------- 1
96358GWVG ------- 2
96358MV2G ------- 3
96358M ------- 4
96358B ------- 5
96358BGWE_OEM1 ------- 6
96359PONG ------- 7
96358SV ------- 8
96358VW2_b20 ------- 9
Board Id (0-9) :0
Number of MAC Addresses (1-32) :012
Base MAC Address :00:00:00:00:00:00
PSI Size (1-64) KBytes :24
Flash Block Size (1-128) in KBytes:0
Invalid flash block size (1-128) Kbytes;Try again!
Flash Block Size (1-128) in KBytes:0128
Auxillary File System Size Percent:0
Main Thread Number :0
Flash layout changed. Need to erase all flash except bootrom
Invalid command: "e"
Available commands:
Flash Layout: Boot Kern[-1,0xbdffffff]
AuxFS[-1,0x00000000] Misc[-1,0x00000000] PSI[-1,0x00000000]
Flash RootFS Partition Length: 1107296257
100 MB Full-Duplex (auto-neg)
CPU type 0x2A010: 300MHz, Bus: 133MHz, Ref: 64MHz
CPU running TP0
Total memory: 33554432 bytes (32MB)
Total memory used by CFE:0x80401000 - 0x805285A0 (1209760)
Initialized Data: 0x8041DD30 - 0x8041FDC0 (8336)
BSS Area: 0x8041FDC0 - 0x804265A0 (26592)
Local Heap: 0x804265A0 - 0x805265A0 (1048576)
Stack Area: 0x805265A0 - 0x805285A0 (8192)
Text (code) segment: 0x80401000 - 0x8041DD30 (118064)
Boot area (physical): 0x00529000 - 0x00569000
Relocation Factor: I:00000000 - D:00000000
Use default boot line parameters: e=192.168.1.1:ffffff00 h=192.168.1.159 g= r=h f=308nfs6358 i=bcm963xx_fs_kernel d=1 p=0
Board IP address : 192.168.1.1:ffffff00
Host IP address : 192.168.1.159
Gateway IP address :
Run from flash/host (f/h) : h
Default host run file name : 308nfs6358
Default host flash file name : bcm963xx_fs_kernel
Boot delay (0-9 seconds) : 1
Board Id (0-9) :
Number of MAC Addresses (1-32) : 0
Base MAC Address : 00:00:00:00:00:00
PSI Size (1-64) KBytes : 24
Flash Block Size (1-128) in KBytes: 0
Auxillary File System Size Percent: 0
Main Thread Number : 0
*** Press any key to stop auto run (1 seconds) ***
Auto run second count down: 1
web info: Waiting for connection on socket 0.
CFE>
信息填完 CFE出来了 LAN4口也能进网页 可是固件就是刷不进去
尝试很多版本了 哪个都刷不进去 现在只有连上超级终端填上信息 LAN4口才能亮 才能连接上电脑升级页面
回复 yanf141 的帖子
就是用这个软件
页:
[1]
2