【已解决】变砖悲剧还是发生了，从openwrt刷回原版固件出错，能进CFE能ping通。
本帖最后由 unknow-mon 于 2010-10-14 11:28 编辑D-Link DSL-2650BU，本来想刷OpenWRT再装个MentoHUST来搞锐捷拨号的，没成功。
想想OpenWRT不能用ADSL了，就刷回2650的官方1.0版固件。
但是刷完之后不能进入系统了，停留在CFE那，代码如下
CFE version 1.0.37-6.5 for BCM96358 (32bit,SP,BE)
Build Date: Sun Apr 26 00:57:24 CST 2009 (root@MOD6538)
Copyright (C) 2000-2005 Broadcom Corporation.
Boot Address 0xbe000000
Initializing Arena.
Initializing Devices.
Parallel flash device: name AM29LV320MT, id 0x2201, size 16384KB
CPU type 0x2A010: 300MHz, Bus: 133MHz, Ref: 64MHz
CPU running TP0
Total memory: 33554432 bytes (32MB)
Total memory used by CFE:0x80401000 - 0x80528280 (1208960)
Initialized Data: 0x8041DB50 - 0x8041F980 (7728)
BSS Area: 0x8041F980 - 0x80426280 (26880)
Local Heap: 0x80426280 - 0x80526280 (1048576)
Stack Area: 0x80526280 - 0x80528280 (8192)
Text (code) segment: 0x80401000 - 0x8041DB4C (117580)
Boot area (physical): 0x00529000 - 0x00569000
Relocation Factor: I:00000000 - D:00000000
Board IP address : 192.168.1.1:ffffff00
Host IP address : 192.168.1.100
Gateway IP address :
Run from flash/host (f/h) : f
Default host run file name : vmlinux
Default host flash file name : bcm963xx_fs_kernel
Boot delay (0-9 seconds) : 1
Board Id Name : 96358VW2
Psi size in KB : 24
Number of MAC Addresses (1-32) : 12
Base MAC Address : 00:1c:f0:c7:2b:1a
Ethernet PHY Type : External Switch Using Reverse MII
*** Press any key to stop auto run (1 seconds) ***
Auto run second count down: 0
Code Address: 0x802CBD87, Entry Address: 0x6eb879fe
Failed on decompression.Corrupted image?
web info: Waiting for connection on socket 0.
CFE>
192.168.1.1能ping通，TTL=100，但是Web上打不开刷新界面，尝试用TFTP也不行，现在该怎么刷？？？？？？ 把电脑设置为192.168.1.2，网关为192.168.1.1，掩码255.255.255.0，插网线到LAN1\2\3\4，看哪个能PING通就从哪里刷 赶快试一试啊 把临时文件清空就能打开CFE的web刷新页面了，解决……
页:
[1]