DB120-WG单USB口刷V3.10L.CT_10.A2pB022g.d20e固件无法启动
DB120-WG单USB口刷 【BCM6358】DB120-WG V3.10L.CT_10.A2pB022g.d20e【公版固件】无法启动-------------------------------------------------
DB120-WG芯片型号
BCM6358URKFBG
HA0948 P11
949158 N1
BCM4318KFBG
HD0948 P11
948500 B5A
BCM5325EKQMG
RG1002 P11
955981 1A
MX29GL128EHT2I 90G
W9425G6EH-5
----------------------------------------------------
软件版本V60.1.01.01
软件编号TS8-2F-005
次版本号V01
SVN版本310_CT_10_Release.55
编译日期Mon Mar 8 16:23:31 CST 2010
固件版本3.10L.CT_10.A2pB022g.d20e
CFE 版本1.0.37-10.3
----------------------------------------------------------
Board ID:96358UR
Software Version:3.10L.CT_10.A2pB022g.d20e
Bootloader (CFE) Version:1.0.37-10.3
Wireless Driver Version:4.150.10.15.cpe2.2
----------------------------------------------------------
TTL数据如下：
CFE version 1.0.37-10.3 for BCM96358 (32bit,SP,BE)
Build Date: Fri Aug 28 09:48:16 EDT 2009 (root@localhost.localdomain)
Copyright (C) 2000-2006 Broadcom Corporation.
Boot Address 0xbe000000
Initializing Arena.
Initializing Devices.
Parallel flash device: name AM29LV320MT|S29GL128-A, id 0x2201, size 16384KB
Flash Layout: Boot Kern
AuxFS Misc PSI
Flash RootFS Partition Length: 12320768
CFE using EMAC 1
CPU type 0x2A010: 300MHz, Bus: 133MHz, Ref: 64MHz
CPU running TP0
Total memory: 33554432 bytes (32MB)
Total memory used by CFE:0x80401000 - 0x805285C0 (1209792)
Initialized Data: 0x8041E210 - 0x8041FDE0 (7120)
BSS Area: 0x8041FDE0 - 0x804265C0 (26592)
Local Heap: 0x804265C0 - 0x805265C0 (1048576)
Stack Area: 0x805265C0 - 0x805285C0 (8192)
Text (code) segment: 0x80401000 - 0x8041E208 (119304)
Boot area (physical): 0x00529000 - 0x00569000
Relocation Factor: I:00000000 - D:00000000
Board IP address : 192.168.1.1:ffffff00
Host IP address : 192.168.1.159
Gateway IP address :
Run from flash/host (f/h) : h
Default host run file name : 308nfs6358
Default host flash file name : bcm963xx_fs_kernel
Boot delay (0-9 seconds) : 1
Boot image (0=latest, 1=previous) : 0
Board Id (0-2) : 96358UR
Number of MAC Addresses (1-32) : 24
Base MAC Address : 00:1e:40:fc:65:1d
PSI Size (1-64) KBytes : 24
Flash Block Size (1-128) in KBytes: 128
Auxillary File System Size Percent: 25
Main Thread Number : 0
*** Press any key to stop auto run (1 seconds) ***
Auto run second count down: 110
Booting from latest image (0xbe600000) ...
Code Address: 0x80010000, Entry Address: 0x80263018
Decompression OK!
Entry at 0x80263018
Closing network.
Starting program at 0x80263018
Linux version 2.6.8.1 (root@linuxserver) (gcc version 3.4.2) #1 Fri Feb 27 16:53:54 HKT 2009
Parallel flash device: name AM29LV320MT|S29GL128-A, id 0x2201, size 16384KB
*** Board is not initialized properly ***
96358UR prom init
CPU revision is: 0002a010
Determined physical RAM map:
memory: 01fa0000 @ 00000000 (usable)
On node 0 totalpages: 8096
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 4000 pages, LIFO batch:1
HighMem zone: 0 pages, LIFO batch:1
Built 1 zonelists
Kernel command line: root=31:0 ro noinitrd console=ttyS0,115200
brcm mips: enabling icache and dcache...
Primary instruction cache 32kB, physically tagged, 2-way, linesize 16 bytes.
Primary data cache 16kB 2-way, linesize 16 bytes.
PID hash table entries: 128 (order 7: 1024 bytes)
Using 150.000 MHz high precision timer.
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 29376k/32384k available (1948k kernel code, 2964k reserved, 427k data, 80k init, 0k highmem)
Calibrating delay loop... 299.00 BogoMIPS
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Checking for 'wait' instruction...unavailable.
NET: Registered protocol family 16
Computing partition layout for flash of size sectors
Flash split 25% into RootFS+Kernel : AuxFS
Partition ROOTFS_KRN Blks[ 94: 1 ..94]
SubPartition Image 1 Blks[ 47: 1 ..47]
SubPartition Image 2 Blks[ 47:48 ..94]
Blk# BlkOff Blks BlkSize AvailSize MemStart MemLen Partition Name
0 1408 1131072 131072 0xbe000580 1024 BOOTLOADER
1 0 9413107212320768 0xbe020000 12320768 ROOTFS_KRN
95 0 31131072 4063232 0xbebe0000 4063232 JFFS_AUXFS
126 0 1131072 131072 0xbefc0000 131072 LOG_SCRPAD
127 106496 1131072 131072 0xbeffa000 24576 PERSISTMEM
Can't analyze prologue code at 801f59f4
SCSI subsystem initialized
usbcore: registered new driver hub
Skipping PCI bus scan due to resource conflict
TC classifier action (bugs to netdev@oss.sgi.com cc hadi@cyberus.ca)
JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc.
Initializing Cryptographic API
PPP generic driver version 2.4.2
NET: Registered protocol family 24
Using noop io scheduler
bcm963xx_mtd driver v2.0
File system address: 0xbe600100
Registered device mtd dev Flash
Registered device mtd dev Flash
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ohci_hcd: block sizes: ed 64 td 64
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usbcore: registered new driver usbnet
brcmboard: brcm_board_init entry
Serial: BCM63XX driver $Revision: 3.00 $
ttyS0 at MMIO 0xfffe0100 (irq = 10) is a BCM63XX
ttyS1 at MMIO 0xfffe0120 (irq = 11) is a BCM63XX
Mirror/redirect action on
u32 classifier
input device check on
Actions configured
NET: Registered protocol family 2
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 15
Ebtables v2.0 registered
NET: Registered protocol family 8
NET: Registered protocol family 20
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (squashfs filesystem) readonly.
Freeing unused kernel memory: 80k freed
init started:BusyBox v1.00 (2009.02.27-08:58+0000) multi-call binary
Algorithmics/MIPS FPU Emulator v1.5
BusyBox v1.00 (2009.02.27-08:58+0000) Built-in shell (msh)
Enter 'help' for a list of built-in commands.
Loading drivers and kernel modules...
atmapi: module license 'Proprietary' taints kernel.
adsl: adsl_init entry
blaadd: blaa_detect entry
Broadcom BCMPROCFS v1.0 initialized
BCM63xx_ENET board id not set
insmod: cannot insert `/lib/modules/2.6.8.1/extra/bcm_enet.ko': Success (19): Success
Broadcom BCM6358A1 USB Network Device v0.4 Feb 27 2009 16:52:28
usb0: MAC Address: 00 1E 40 FC 65 1D
usb0: Host MAC Address: 00 1E 40 FC 65 1E
BcmAdsl_Initialize=0xC00B63F8, g_pFnNotifyCallback=0xC00CF3C4
AnnexCParam=0x7FFF7EB8 AnnexAParam=0x00000980 adsl2=0x00000000
pSdramPHY=0xA1FFFFF8, 0xFFCFFFD7 0xFFFFDFFF
AdslCoreHwReset: AdslOemDataAddr = 0xA1FFD3D4
AnnexCParam=0x7FFF7EB8 AnnexAParam=0x00000980 adsl2=0x00000000
dgasp: kerSysRegisterDyingGaspHandler: dsl0 registered
ATM proc init !!!
==> Bcm963xx Software Version: 3.10L.CT_10.A2pB022g.d20e-310CT0901200805082209 <==
device usb0 entered promiscuous mode
device usb0 left promiscuous mode
br0: port 1(usb0) entering disabled state
device usb0 entered promiscuous mode
ipt_hashlimit: Unknown symbol ipt_register_match
ipt_hashlimit: Unknown symbol ipt_unregister_match
insmod: cannot insert `/lib/modules/2.6.8.1/kernel/net/ipv4/netfilter/ipt_hashlimit.ko': Success (2): Success
iptables v1.2.11: can't initialize iptables table `filter': iptables who? (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
到这儿就停了
帮忙看看 已经解决了，在CFE下用b命令修改Board Id为0（将96358UR ------- 1改为96358VW2 ------- 0）就行了 请教楼主，公版固件可支持脱机下载吗，可同时使用ADSL功能吗。
页:
[1]