RG100A-AA刷成这样了，怎么清掉CFE，重刷？
Board IP address : 192.168.1.1:ffffff00Host IP address : 192.168.1.100
Gateway IP address :
Run from flash/host (f/h) : f
Default host run file name : vmlinux
Default host flash file name : bcm963xx_fs_kernel
Boot delay (0-9 seconds) : 1
Boot image (0=latest, 1=previous) : 0
Board Id (0-5) : 96358GWVG
Number of MAC Addresses (1-32) : 12
Base MAC Address : 00:10:18:00:00:00
PSI Size (1-64) KBytes : 24
Main Thread Number : 0
*** Press any key to stop auto run (1 seconds) ***
Auto run second count down: 1
web info: Waiting for connection on socket 0.
CFE> help
Available commands:
sm Set memory or registers.
dm Dump memory or registers.
w Write the whole image start from beginning of the flash
e Erase vram or ll flash except bootrom
r Run program from flash image or from host depend on flag
p Print boot line and board parameter info
c Change booline parameters
f Write image to the flash
i Erase persistent storage data
b Change board parameters
reset Reset the board
flashimage Flashes a compressed image after the bootloader.
help Obtain help for CFE commands
高手们看看吧，我刷了那个中文版的BCM固件后，感觉不好用。后来又在WEB 下刷联通的固件，就反复重启了，不知道是何原因。、
帮把TTL下的图传上来，高手们帮我看看，具体步骤要怎么操作，请指教。谢谢了！
页:
[1]