急哭了......YES东哥....能来帮个忙不?
今天把RG100-aa换了64M内存.......在论坛上问了接下来该怎么做.没一个人回答.......自己只好硬着头皮上去刷了.
先找了个固件.是https://www.chinadsl.net/viewthread.php?tid=47459
再找到一个rg100a的步骤帖.....https://www.chinadsl.net/viewthread.php?tid=39873
按照步骤...做....刷完就ping不通了....但是进入cfe就能ping通.........
可能没刷对.........我就下了那个带cfe的包刷......
刷完之后.......连进入cfe都ping不通了.......
现在该怎么办啊?.....CFE的固件升级界面也进不去......
YES东大大.........帮个忙吧.....我是新手.....指点一二. CFE version 1.0.37-6.5 for BCM96358 (32bit,SP,BE)
Build Date: Sun Apr 26 00:57:24 CST 2009 (root@MOD6538)
Copyright (C) 2000-2005 Broadcom Corporation.
Boot Address 0xbe000000
Initializing Arena.
Initializing Devices.
Parallel flash device: name AM29LV320MT, id 0x2201, size 16384KB
CPU type 0x2A010: 300MHz, Bus: 133MHz, Ref: 64MHz
CPU running TP0
Total memory: 67108864 bytes (64MB)
Total memory used by CFE:0x80401000 - 0x80528280 (1208960)
Initialized Data: 0x8041DB50 - 0x8041F980 (7728)
BSS Area: 0x8041F980 - 0x80426280 (26880)
Local Heap: 0x80426280 - 0x80526280 (1048576)
Stack Area: 0x80526280 - 0x80528280 (8192)
Text (code) segment: 0x80401000 - 0x8041DB4C (117580)
Boot area (physical): 0x00529000 - 0x00569000
Relocation Factor: I:00000000 - D:00000000
Board IP address : 192.168.1.1:ffffff00
Host IP address : 192.168.1.100
Gateway IP address :
Run from flash/host (f/h) : f
Default host run file name : vmlinux
Default host flash file name : bcm963xx_fs_kernel
Boot delay (0-9 seconds) : 1
Board Id Name : 96358GW-16
Psi size in KB : 24
Number of MAC Addresses (1-32) : 12
Base MAC Address : 00:1f:a3:49:fa:54
Ethernet PHY Type : External Switch Using Reverse MII
*** Press any key to stop auto run (1 seconds) ***
Auto run second count down: 0
Code Address: 0x80010000, Entry Address: 0x802bc018
Decompression OK!
Entry at 0x802bc018
Closing network.
Starting program at 0x802bc018
Linux version 2.6.8.1 (lijf@deb-vm) (gcc version 3.4.2) #17 Sun Jul 18 19:59:44 CST 2010
Parallel flash device: name AM29LV320MT, id 0x2201, size 16384KB
*** Board is not initialized properly ***
96358GW-16 prom init
CPU revision is: 0002a010
Determined physical RAM map:
memory: 03fa0000 @ 00000000 (usable)
On node 0 totalpages: 16288
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 12192 pages, LIFO batch:2
HighMem zone: 0 pages, LIFO batch:1
Built 1 zonelists
Kernel command line: root=31:0 ro noinitrd console=ttyS0,115200
brcm mips: enabling icache and dcache...
Primary instruction cache 32kB, physically tagged, 2-way, linesize 16 bytes.
Primary data cache 16kB 2-way, linesize 16 bytes.
PID hash table entries: 256 (order 8: 2048 bytes)
Using 150.000 MHz high precision timer.
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 61452k/65152k available (2109k kernel code, 3632k reserved, 622k data, 84k init, 0k highmem)
Calibrating delay loop... 299.82 BogoMIPS
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Checking for 'wait' instruction...unavailable.
NET: Registered protocol family 16
Total Flash size: 16384K with 128 sectors
File system address: 0xbe020100
Can't analyze prologue code at 8021dbac
usbcore: registered new driver hub
Skipping PCI bus scan due to resource conflict
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Initializing Cryptographic API
loop: loaded (max 8 devices)
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
MPPE/MPPC encryption/compression module registered
NET: Registered protocol family 24
Using deadline io scheduler
bcm963xx_mtd driver v1.0
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ohci_hcd: block sizes: ed 64 td 64
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
brcmboard: brcm_board_init entry
======= GPIO CONFIG_BCM96358 init ========
Serial: BCM63XX driver $Revision: 3.00 $
ttyS0 at MMIO 0xfffe0100 (irq = 10) is a BCM63XX
ttyS1 at MMIO 0xfffe0120 (irq = 11) is a BCM63XX
NET: Registered protocol family 2
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 8192)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 15
Ebtables v2.0 registered
NET: Registered protocol family 8
NET: Registered protocol family 20
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (squashfs filesystem) readonly.
Freeing unused kernel memory: 2100180k freed
init started:BusyBox v1.00 (2010.06.20-10:52+0000) multi-call binary
Algorithmics/MIPS FPU Emulator v1.5
BusyBox v1.00 (2010.06.20-10:52+0000) Built-in shell (ash)
Enter 'help' for a list of built-in commands.
-sh: can't access tty; job control turned off
Loading drivers and kernel modules...
fuse init (API version 7.5)
fuse distribution version: 2.5.3
fuse init: DCACHE_BUG enabled
atmapi: module license 'Proprietary' taints kernel.
adsl: adsl_init entry
blaadd: blaa_detect entry
Broadcom BCMPROCFS v1.0 initialized
BCM63xx_ENET board id not set
insmod: cannot insert `/lib/modules/2.6.8.1/extra/bcm_enet.ko': Success (19): Success
Broadcom BCM6358A1 USB Network Device v0.4 Feb 24 2009 16:12:16
usb0: MAC Address: 00 1F A3 49 FA 54
usb0: Host MAC Address: 00 1F A3 49 FA 55
proc file create OK for wireless lan.
wlctl: wl driver adapter not found
wlctl: wl driver adapter not found
wlctl: wl driver adapter not found
wlctl: wl driver adapter not found
wlctl: wl driver adapter not found
wlctl: wl driver adapter not found
wlctl: wl driver adapter not found
wlctl: wl driver adapter not found
wlctl: wl driver adapter not found
BcmAdsl_Initialize=0xC00573C8, g_pFnNotifyCallback=0xC0070324
AnnexCParam=0x7FFF7E18 AnnexAParam=0x00000980 adsl2=0x00000000
pSdramPHY=0xA3FFFFF8, 0x200 0x0
AdslCoreHwReset: AdslOemDataAddr = 0xA3FFD3D4
AnnexCParam=0x7FFF7E18 AnnexAParam=0x00000980 adsl2=0x00000000
dgasp: kerSysRegisterDyingGaspHandler: dsl0 registered
ATM proc init !!!
==> Bcm963xx Software Version: RU_1.00 <==
device usb0 entered promiscuous mode
ioctl, p_name=diapd
I am open &async_queue = 0xc00327a4<3>kill_fasync: bad magic number in fasync_struct!
##############status LED blink now##################
wlButtonInit open success
gpio_fasync
Pasync_queue->magic = 0x4601
*** diapwait system init 1 sec start
*** diapwait system init 1 sec end
delay_run start
SCSI subsystem initialized
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered. 如果你是刷了含cfe版本的就有可能无法再次进入cfe的web界面，大部分cfe是不带web界面的。你要重写cfe只能用jatg线来重写cfe了。
页:
[1]