请教!!联通1+ bcm5354 刷DD固件到这里进行不下去了.WEB不能登陆.
CFE version 1.0.37 for BCM947XX (32bit,SP,LE)Build Date: Fri Dec 12 18:04:14 CST 2008 (joan@mochow)
Copyright (C) 2000,2001,2002,2003 Broadcom Corporation.
Initializing Arena
Initializing Devices.
Boot partition size = 131072(0x20000)
et0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 4.150.19.0
CPU type 0x29029: 240MHz
Total memory: 32768 KBytes
Total memory used by CFE:0x80700000 - 0x80798F60 (626528)
Initialized Data: 0x8072FFE0 - 0x80732740 (10080)
BSS Area: 0x80732740 - 0x80732F60 (2080)
Local Heap: 0x80732F60 - 0x80796F60 (409600)
Stack Area: 0x80796F60 - 0x80798F60 (8192)
Text (code) segment: 0x80700000 - 0x8072FFE0 (196576)
Boot area (physical): 0x00799000 - 0x007D9000
Relocation Factor: I:00000000 - D:00000000
Device eth0:hwaddr 00-1D-6A-62-12-9D, ipaddr 192.168.1.1, mask 255.255.255.0
gateway not set, nameserver not set
Max TRX Image Supported: 0xFA0000
Loader:raw Filesys:tftp Dev:eth0 File:: Options:(null)
Loading: .... 3661824 bytes read
Entry at 0x80798f60
Reading from 0x80798f60: Programming...done. 3661824 bytes written
Loader:raw Filesys:raw Dev:flash0.os File: Options:(null)
Loading: .. 3732 bytes read
Entry at 0x80001000
Closing network.
Starting program at 0x80001000
CPU revision is: 00029029
Linux version 2.4.36 (bin@dd-wrt) (gcc version 3.4.6 (OpenWrt-2.0)) #995 Wed Jul
30 20:23:12 CEST 2008
Setting the PFC to its default value
Determined physical RAM map:
memory: 02000000 @ 00000000 (usable)
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd cons
ole=ttyS0,115200
CPU: BCM5354 rev 3 at 240 MHz
Using 120.000 MHz high precision timer.
Calibrating delay loop... 239.20 BogoMIPS
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
Checking for 'wait' instruction...unavailable.
POSIX conformance testing by UNIFIX
PCI: no core
PCI: Fixing up bus 0
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
squashfs: version 3.0 (2006/03/15) Phillip Lougher
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI en
abled
ttyS00 at 0xb8000300 (irq = 3) is a 16550A
ttyS01 at 0xb8000400 (irq = 3) is a 16550A
sb_doattach: incoming bus is PCI but it's a lie, switching to SB devid:0x4318
Universal TUN/TAP device driver 1.5 (C)1999-2002 Maxim Krasnyansky
Amd/Fujitsu Extended Query Table v1.3 at 0x0040
number of CFI chips: 1
cfi_cmdset_0002: Disabling fast programming due to code brokenness.
Flash device: 0x1000000 at 0x1c000000
bootloader size: 131072
Physically mapped flash: Filesystem type: squashfs, size=0x29b937
Updating TRX offsets and length:
old trx = , len=0x0037e000 crc32=0x519c2b11
new trx = , len=0x00380000 crc32=0x4dc5ee0e
Done
Creating 5 MTD partitions on "Physically mapped flash":
0x00000000-0x00020000 : "cfe"
0x00020000-0x00fe0000 : "linux"
0x00101800-0x003a0000 : "rootfs"
mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-o
nly
0x00fe0000-0x01000000 : "nvram"
0x003a0000-0x00fe0000 : "ddwrt"
sflash not supported on this router
Initializing Cryptographic API
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
ip_conntrack version 2.1 (512 buckets, 4096 max) - 336 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
ipt_random match loaded
netfilter PSD loaded - (c) astaro AG
ipt_osf: Startng OS fingerprint matching module.
ipt_IPV4OPTSSTRIP loaded
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Booting device: D-Link DIR-320
boardflags are 0x0750
sh: cannot create /proc/switch/eth1/reset: nonexistent directory
sh: cannot create /proc/sys/net/ipv4/tcp_congestion_control: nonexistent directo
ry
nvram_commit(): end
eth1: Operation not supported
wl0.1: No such device
wl0.2: No such device
wl0.3: No such device
eth1: Invalid argument
eth1: Invalid argument
SIOCGIFFLAGS: No such device
SIOCGIFFLAGS: No such device
SIOCGIFFLAGS: No such device
SIOCGIFFLAGS: No such device
vlan1: Setting MAC address to00 90 4c c0 04 bd.
VLAN (vlan1):Setting underlying device (eth0) to promiscious mode.
sh: /tmp/.rc_startup: not found
connect: Network is unreachable
connect: Network is unreachable
connect: Network is unreachable
gethostbyname: Network is unreachable
DD-WRT v24 std (c) 2008 NewMedia-NET GmbH
Release: 07/30/08 (SVN revision: 10061)
DD-WRT login: 已经刷新成功了，都到达dd的登录界面了 但是我WEB登陆不了啊。PING不通192。168。1。1。要在哪里设置吗？？ 但是我WEB登陆不了啊。PING不通192。168。1。1。要在哪里设置吗？？
wwang 发表于 2010-3-20 09:44 https://www.chinadsl.net/images/common/back.gif
设备无线灯亮起后你按住wps十秒松开试试，如果不行就按住wifi按钮十秒松开。两种做法都要重启设备后看看是否可以进入界面 本帖最后由 wwang 于 2010-3-20 12:03 编辑
按住WPS10秒后提示一个清除什么。然后就自动重启了。 starting Architecture code for broadcom
Booting device: Linksys WRT54G/GL/GS
loading sysinit
boardflags are 0x0750
BCMDOG: WDT device closed unexpectedly.WDT will not stop!
Restarting system.
Please stand by while rebooting the system...
页:
[1]