闲来无事，发一个GT701-WG 接TTL线至超级终端的启动信息
GT701-WG 的TTL 线接法,来自 jesse9999 发表的《GT701-WG刷RouterTech Firmware的方法》中引用的地址http://www.tlarson.com/guides/dslhack/serial其中有图示：我用的是一根三星手机用的USB转COM3的数据线(非原装,网购的,ARK3116S 芯片),用一个光驱音频线做的插座,刚刚好,只接三根线.在超级终端选COM3,38400(不是常用的115200,因为波特率不对,会显示乱码,仔细阅读了那个引用的外文网址才发现里面已经说了是38400,我汗),8,N,1,数据流控制选 无.打开GT701-WG 后,超级终端显示如下:
ADAM2 Revision 0.22.02
do_unum action=0
(C) Copyright 1996-2003 Texas Instruments Inc. All Rights Reserved.action=1
open unum_ip
(C) Copyright 2003 Telogy Networks, Inc.n unum_ip
do_unum action=1
Usage: setmfreq [-d] [-s sys_freq, in MHz]
open unum_ip
do_unum action=1
Memory optimization Complete!
do_unum action=0
Adam2_AR7DB >m_ip
Press any key to abort OS load, or wait 5 seconds for OS to boot...
open unum_ip
do_unum action=0
Launching kernel decompressor.
Starting LZMA Uncompression Algorithm.
Copyright (C) 2003 Texas Instruments Incorporated; Copyright (C) 1999-2003 Igor
Pavlov.
Compressed file is LZMA format.
Number of TLB entries 16.
Linux version 2.4.17_mvl21-malta-mips_fp_le (nsp@localhost.localdomain) (gcc ver
sion 2.95.3 20010315 (release/MontaVista)) #1 Wed Oct 1 16:15:59 PDT 2008
Determined physical RAM map:
memory: 14000000 @ 00000000 (rese
memory: 00020000 @ 14000000 (ROM data)
memory: 00fe0000 @ 14020000 (usable)
On node 0 totalpages: 4096
zone(0): 4096 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line:
calculating r4koff... 000b71b0(750000)
CPU frequency 150.00 MHz
Calibrating delay loop... 149.91 BogoMIPS
Freeing Adam2 reserved memory
Memory: 14276k/16384k available (1561k kernel code, 2108k reserved, 127k data, 6
0k init)
Dentry-cache hash table entries: 2048 (order: 2, 16384 bytes)
Inode-cache hash table entries: 1024 (order: 1, 8192 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 4096 (order: 2, 16384 bytes)
--------init push-----
Checking for 'wait' instruction...unavailable.
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
TI Optimizations: Allocating TI-Cached Memory Pool.
Warning: Number of buffers is not
Using 120 Buffers for TI-Cached Memory Pool.
DEBUG: Using Hybrid Mode.
NSP Optimizations: Succesfully allocated TI-Cached Memory Pool.
Initializing RT netlink socket
Starting kswapd
Disabling the Out Of Memory Killer
devfs: v1.7 (20011216) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
Adam2 environment variables API installed.
pty: 32 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with no serial options enabled
ttyS00 at 0xa8610e00 (irq = 15) is a 16550A
ttyS01 at 0xa8610f00 (irq
Vlynq CONFIG_MIPS_AVALANCHE_VLYNQ_PORTS=2
Vlynq Device vlynq0 registered with minor no 63 as misc device. Result=0
Vlynq instance:0 Link UP
Vlynq Device vlynq1 registered with minor no 62 as misc device. Result=0
VLYNQ 1 : init failed
block: 64 slots per queue, batch=16
DEBUG: Initializing the voice port management module.
DEBUG: Initialization of the voice port management module successful..
Using the MAC with internal PHY
Cpmac driver is allocating buffer memory at init time.
Cpmac driver Disable TX complete i
PPP generic driver version 2.4.1
imq driver loaded.
avalanche flash device: 0x400000 at 0x10000000.
Amd/Fujitsu Extended Query Table v1.0 at 0x0041
Physically mapped flash:0: Swapping erase regions for broken CFI table.
number of CFI chips: 1
Looking for mtd device :mtd0:
Found a mtd0 image (0xd0000), with size (0x310000).
Creating 1 MTD partitions on "Physically mapped flash:0":
0x000d0000-0x003e0000 : "mtd0"
Looking for mtd device :mtd1:
Found a mtd1 image (0x10000), with size (0xc0000).
Creating 1 MTD partitions on "Physically mapped flash:0":
0x00010000-0x000d0000 : "mtd1"
Looking for mtd device :mtd2:
Found a mtd2 image (0x0), with size (0x10000).
Creating 1 MTD partitions on "Physically mapped flash:0":
0x00000000-0x00010000 : "mtd2"
Looking for mtd device :mtd3:
Found a mtd3 image (0x3f0000), with size (0x10000).
Creating 1 MTD partitions on "Physically mapped flash:0":
0x003f0000-0x00400000 : "mtd3"
Looking for mtd device :mtd4:
Found a mtd4 image (0x3e0000), with size (0x10000).
Creating 1 MTD partitions on "Physically mapped flash:0":
0x003e0000-0x003f0000 : "mtd4"
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 1024 bind 1024)
Linux IP multicast router 0.06 plus PIM-SM
ip_conntrack version 2.0 (128 buckets, 1024 max) - 380 bytes per conntrack
ip_tables: (c)2000 Netfilter core team
netfilter PSD loaded - (c) astaro AG
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NET4: Ethernet Bridge 008 for NET4.0
Initializing the WAN Bridge.
Please set the MAC Address for the WAN Bridge.
Set the Environment variable 'wan_br_mac'.
MAC Address should be in the following format: xx.xx.xx.xx.xx.xx
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k freed
serial console detected.Disabling virtual terminals.
init started:BusyBox v0.61.pre (2008.10.01-23:19+0000) multi-call binary
Algorithmics/MIPS FPU Emulator v1.5
/bin/cp/etc/ppp/*
cp: /etc/ppp/resolv.conf: No such file or directoryopyright 1996-2003 Texas Instruments Inc. All Right
cp: /etc/dproxy.conf: No such file or directory
(C) Copyright 20
cp: /etc/dropbear: omitting directory
Usage: set
cp: /etc/gateways: No such file or directoryn MHz]
cp: /etc/hosts: No such file or directoryn Complete!
cp: /etc/init.d: omitting directoryy key to abort OS load, or wait 5 s
cp: /etc/linux-igd: No such file or directory
cp: /etc/passwd: No such file or directory
Starting LZMA Uncompres
cp: /etc/ppp: omitting directory
Copyright (
cp: /etc/resolv.conf: No such file or directoryt (C) 1999-2003 Igor
cp: /etc/shadow: No such file or directory
Pavlov.
Compressed file i
cp: /etc/stunnel: omitting directory
Reading Standard Configuration File /etc/led.conf
Number of T
Configured 52 states
Linu
Using /lib/modules/2.4.17_mvl21-malta-mips_fp_le/kernel/drivers/atm/tiatm.o
registered device TI Avalanche SAR/MontaVista)) #1 Wed Oct 1 16:15:5
Sangam detected
--DSL_FEATURE_CNTL_0=0x0020020C
Determined
--DSL_PHY_CNTL_0=0x00100800
memory:
DSP binary filesize = 383830 b
b/avalanche_usb.oting r4koff... 00
USB: Entering USB_init_module.
CPU freq
USB Driver built for RNDIS-CDC protocols.alibrating delay loop... 149.91 BogoMIPS
Error getting protocol configuration from bootloader environment.mory
Defaulting to "RNDIS-CDC" mode.16384k available (1561k kernel
Start usb_clk_check, 127k data, 6
VID = 0x1668
PID = 0x6010
No Serial Number String present.)
Dentry-cache hash tabl
Manufacturer = Texas Instrumentsbytes)
Product description = Texas Instruments CD
Please press Enter to activate this console. UN=000FB3-38D426entries: 4096 (order: 2, 16384 bytes)
ACS_Bootstrap= 0
----set stunnel acs_url-
dhcps ReservedAddresses=192.168.0.1 unavailable.
pPriv->ifaddr=
PO
dhcps lease=86400sting by UNIFIX
no cert defined in config.xml, use default4.0 for Linux 2.4
modid=saron Swanse
duplex value=omputer Socie
-----wlan load.
2--- ssid = ACTIONTEC,0, adding=0
TI Optimizations: Allocating TI
3-config ssid = ACTIONTEC,0
wpa sec type=2,0Warning: Number
insmod tiap.o......
vip=0.0.0.0
vmode=(null)DEBUG: Using
vip=(null)e.
vmode=(null)
NSP Opt
vip=(null) Succesful
******dhcpd is onhed Memory Pool.
stunnel start
**check (null) (null) (null) (null)nitializing RT netlink socket
tn7dsl_set_modulation : Setting mode to 0x1
Disabling the Out Of Memory Kil
logic init (test kprintf)...
devfs: v1.7 (200112
Query usb0 Gooch (rg
Query wlan0iro.au)
Bridge query ap
Query eth0
Query usb0boot_optio
device eth0 entered promiscuous mode environment variables API installed
br0: port 1(eth0) entering learning state
pty: 32 Unix98 ptys configured
device usb0 entered promiscuous modeersion 5.05c (2001-07-08) with no se
br0: port 2(usb0) entering learning state
br0: port 1(eth0) entering forwarding statea 16550A
br0: topology change detected,irq
283: WLAN driver database is up
Vlynq instance:0 Lin
Resetting the remote device.Vlynq Device vlynq1 register
Un-resetting the remote device.ce. Result=0
About to re-init the VLYNQ.
V
Re-initialized the VLYNQ.
block: 64
284: AcxRegAddr = 0xA4040000, AcxMemAddr = 0xA4000000
DEBUG: Initializing the voice port management
284: whal_acxProcInitiate: found DEVICE_VENDOR ID = 0x9066104cEBUG: Initialization of the voice port management module succe
284: whal_acxProcInitiate: Cpu halt -> download code
Using the MAC with internal
284: whal_acxProcLoadFwImage: 0xa4000000, 0x0er is allocating buffer memory at init time.
284: whal_acxProcLoadFwImage() -- Loading FW image284: Compiliver Disable TX complete i
Physically mapped flash:0: Swapping erase regions
en=0x3oken C
285: whal_acxProcLoadFwImage: 3, pBuf=0xc00b6000, len=0x15564, DataLen=0x1555c
number of CFI chips: 1
Looking for mtd device :mtd0:
286: whal_acxProcLoadFwImage: 4, pBuf=0xc00b6000, len=0x15564 size (0x310000).
286: whal_acxProcLoadFwImage: Checksum, calc=0x71e76f, file=0x71e76f
0x000d0000-0x0
289: whal_acxProcInitiate: run
Looking for mt
289: whal_acxProcWaitInitComplete:
Found a mtd1 image (0x10
br0: port 2(usb0) entering forwarding state
Found a mtd3 image (0x3f0000), with
295: whal_acxProcConfigure: templates (beacon, probe response, tim) for NetwD partitions on "Physically mapped flash:0":
ork
295: whal_acxProcConfigure: Host Queue is in 0x944FC020
Looking for mtd device :mtd4:
295:TxQueue NumDesc= 32 mtd4 image (0x3e0000), with s
295:TxQueue Priority = 0
NET4: L
HostRxDescriptorsAddr = 144fc020
IP Pr
296:RxQueue NumDesc= 32P
296:RxQueue Priority = 0hash table of 512 buckets,
296:RxQueue type = 7
296:296: whal_acxProcConfigure: WEP cacheshed 1024 bind 1024)
297: whal_acxProcConfigure: read queue headslticast router 0.06 plus PIM-SM
297: whal_acxConfigRead_QueueHead() -rack version 2.0 (128 buckets, 1024 m
297:RxMemBlkQ - 00015920
297:RxQueueHead - 00012f14
ip_tables:
297:TxMemBlkQ - 0001b320
297:TxMemBlkQ- 00013594d - (c) astaro AG
297:TxMemBlkQ- 00013c144: Unix domain sockets 1.0/S
297:297: whal_acxProcConfigure: confi
298: whal_ParamsPrintMemMap:
MAC Addres
298: Code(0x00000000, 0x0001250c).xx.xx.xx.xx.xx
Wep (0x000127e0, 0x000128f0)
VFS: Mounted root (squashfs filesys
Sta (0x000128f0, 0x00012ef8)
Mounted devfs
Tmpl(0x00012524, 0x000125bc)nused kernel memory: 60k freed
Queue (0x00012f14, 0x00014294)console detected.Disabling virtual t
Pool(0x00015920, 0x0001c720)
init started:
300: whal_apiConfig: beaconInterval = 200) multi-call binary
WATCH_DOG_TIMER_VAL = 520
Algorithmics/M
wd_beacon_limiter = 1
/b
300: WLAN HAL lay
321: WDRV_4X: 4x Disabled
cp: /etc/hosts: No s
321: WDRV_4X: Concatenation Disabled
cp: /etc/i
321: WDRV_4X: Ack Emulation Disabled
cp: /etc/lin
321: whal_apiStartBss: Enable Tx, Rx and Start the Bss
cp: /etc/passwd: No such file
322: ----------------------------------------------------------------mitting directory
cp: /etc/resolv.con
322: ----------------------------------------------------------------
cp: /etc/shadow: No such file or directory
322: START BSS, SSID=ACTIONTEC, BSSID=00-0F-B3-38-D4ory
323: ----------------------------------------------------------------
Configured 52 states
timer launch stunnel server
br0: port 3(wlan0) entering forwarding state
br0: topology change detected, propagating
DSL in Sync
DEBUG: Registering protocol inspector: 0x9415d79c for VCC:0x94c73a00
device nas0 entered promiscuous mode
br0: port 4(nas0) entering learning state
br0: port 4(nas0) entering forwarding state
br0: topology change detected, propagating
do_unum action=0
open unum_ip
do_unum action=1
open unum_ip
generated wan ip=110.52.83.69
pppoe_send notification:InternetGatewayDevice.WANtr69 event received
VALUE CHANGE EVENT: InternetGatewayDevice.WANDevlanuch tr-69-client
---update tr69para_hostname
TR69 GOT WAN IP Address=110.52.83.69
---update tr69para_hostname
---1 BOOT
acs_url is not https
---inform successful 在开机时按任意键中断后，用HELP 命令显示只有h/help info memop setmfreq dm erase printenv setenv unsetenv fixenv go这几个命令。
图片做的不错。 我的GT701启动RouterTech292信息：
ADAM2 Revision 0.22.02
(C) Copyright 1996-2003 Texas Instruments Inc. All Rights Reserved.
(C) Copyright 2003 Telogy Networks, Inc.
Usage: setmfreq [-d] [-s sys_freq, in MHz]
Memory optimization Complete!
Adam2_AR7DB >
Press any key to abort OS load, or wait 5 seconds for OS to boot...
Launching kernel LZMA decompressor.
Kernel decompressor was successful ... launching kernel.
LINUX started...
Config serial console: ttyS0,38400
Auto Detection SANGAM chip
CPU revision is: 00018448
Primary instruction cache 16kb, linesize 16 bytes (4 ways)
Primary data cache 16kb, linesize 16 bytes (4 ways)
Number of TLB entries 16.
Linux version 2.4.17_mvl21-malta-mips_fp_le (developers@RouterTech.Org) #1 Tue J
an 5 15:23:29 GMT 2010
Determined physical RAM map:
memory: 14000000 @ 00000000 (reserved)
memory: 00020000 @ 14000000 (ROM data)
memory: 00fe0000 @ 14020000 (usable)
On node 0 totalpages: 4096
zone(0): 4096 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line:
calculating r4koff... 000b
CPU frequency 150.00 MHz
Calibrating delay loop... 149.91 BogoMIPS
Freeing Adam2 reserved memory
Memory: 13984k/16384k available (1841k kernel code, 2400k reserved, 131k data, 6
0k init)
Dentry-cache hash table entries: 2048 (order: 2, 16384 bytes)
Inode-cache hash table entries: 1024 (order: 1, 8192 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 4096 (order: 2, 16384 bytes)
Checking for 'wait' instruction...unavailable.
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
TI Optimizations: Allocating TI-Cached Memory Pool.
Warning: Number of buffers is not configured.Setting default to 128
Using 128 Buffers for TI-Cached Memory Pool.
DEBUG: Using Hybrid Mode.
NSP Optimizations: Succesfully allocated TI-Cached Memory Pool.
Initializing RT netlink socket
Starting kswapd
Disabling the Out Of Memory Killer
devfs: v1.7 (20011216) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
squashfs: version 3.1 (2006/08/19) Phillip Lougher, lzma support by McMCC
Adam2 environment variables API installed.
pty: 32 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with no serial options enabled
ttyS00 at 0xa8610e00 (irq = 15) is a 16550A
ttyS01 at 0xa8610f00 (irq = 16) is a 16550A
Vlynq CONFIG_MIPS_AVALANCHE_VLYNQ_PORTS=2
Vlynq Device vlynq0 registered with minor no 63 as misc device. Result=0
Vlynq instance:0 Link UP
Vlynq Device vlynq1 registered with minor no 62 as misc device. Result=0
VLYNQ 1 : init failed
block: 64 slots per queue, batch=16
DEBUG: Initializing the voice port management module.
DEBUG: Initialization of the voice port management module successful..
loop: loaded (max 8 devices)
Using the MAC with internal PHY
Cpmac driver is allocating buffer memory at init time.
Cpmac driver Enable TX complete interrupt
Default Asymmetric MTU for eth0 1500
PPP generic driver version 2.4.1
PPP Deflate Compression module registered
Universal TUN/TAP device driver 1.4 (C)1999-2001 Maxim Krasnyansky
avalanche flash device: 0x400000 at 0x10000000.
Amd/Fujitsu Extended Query Table v1.0 at 0x0041
Physically mapped flash:0: JEDEC Device ID is 0xC8. Assuming broken CFI table.
Physically mapped flash:0: Swapping erase regions for broken CFI table.
Atmel AT49BVxxx Flash Detected: CFI disable fast programming!!!
Flash type: AMD; Manufacturer=ATMEL.
Manufacturer_ID=0x001F; Chip_ID=0x00C8; Chip_Size=0x400000
The Chief's FLASH extensions (www.RouterTech.Org): code loaded.
number of CFI chips: 1
Looking for mtd device :mtd0:
Found a mtd0 image (0x98000), with size (0x358000).
Creating 1 MTD partitions on "Physically mapped flash:0":
0x00098000-0x003f0000 : "mtd0"
mtd: partition "mtd0" doesn't start on an erase block boundary -- force read-onl
y
Looking for mtd device :mtd1:
Found a mtd1 image (0x10090), with size (0x87f70).
Creating 1 MTD partitions on "Physically mapped flash:0":
0x00010090-0x00098000 : "mtd1"
mtd: partition "mtd1" doesn't start on an erase block boundary -- force read-onl
y
Looking for mtd device :mtd2:
Found a mtd2 image (0x0), with size (0x10000).
Creating 1 MTD partitions on "Physically mapped flash:0":
0x00000000-0x00010000 : "mtd2"
Looking for mtd device :mtd3:
Found a mtd3 image (0x3f0000), with size (0x10000).
Creating 1 MTD partitions on "Physically mapped flash:0":
0x003f0000-0x00400000 : "mtd3"
Looking for mtd device :mtd4:
Found a mtd4 image (0x10000), with size (0x3e0000).
Creating 1 MTD partitions on "Physically mapped flash:0":
0x00010000-0x003f0000 : "mtd4"
Looking for mtd device :mtd5:
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 1024 bind 1024)
Linux IP multicast router 0.06 plus PIM-SM
ip_conntrack version 2.1 (256 buckets, 2048 max) - 384 bytes per conntrack
ip_conntrack_pptp version 1.9 loaded
ip_nat_pptp version 1.5 loaded
ip_tables: (C) 2000-2002 Netfilter
ipt_account 0.1.6 : Piotr Gasid硂 <quaker@barbara.eu.org>, http://www.barbara.eu
.org/~quaker/ipt_account/
netfilter PSD loaded - (c) astaro AG
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NET4: Ethernet Bridge 008 for NET4.0
Initializing the WAN Bridge.
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k freed
Algorithmics/MIPS FPU Emulator v1.5
Tue Jan5 15:26:00 UTC 2010
Reading Standard Configuration File /etc/led.conf
Configured 52 states
registered device TI Avalanche SAR
Sangam detected
DSP binary filesize = 399062 bytes
tn7dsl_set_modulation : Setting mode to 0xff
Texas Instruments ATM driver: version:
ifconfig: SIOCGIFFLAGS: No such device
ifconfig: SIOCGIFFLAGS: No such device
ifconfig: SIOCGIFFLAGS: No such device
Jan5 15:26:12 cfgmgr(pppoe-106): Jan5 15:26:12 | Valid Configuration Tree
PVC dB
vpi = -1 vci = -1 in_use = 0
vpi = -1 vci = -1 in_use = 0
vpi = -1 vci = -1 in_use = 0
vpi = -1 vci = -1 in_use = 0
vpi = -1 vci = -1 i
vpi = -1 vci = -1 in_use = 0
vpi = -1 vci = -1 in_use = 0
vpi = -1 vci = -1 in_use = 0
Doing BRCTL ...
addbr br0
Doing BRCTL ...
addbr br1
Doing BRCTL ...tn7dsl_set_modulation : Setting mode to 0xff
addbr br2
Jan5 15:26:12 cfgmgr(sntp): Jan5 15:26:12 | NTP Polling Timer for DHCP Start
ed succesfully.
Jan5 15:26:12 cfgmgr(sar): Jan5 15:26:12 | DSL Polling Timer Started succesf
ully.
Jan5 15:26:12 cfgmgr(sar): Jan5 15:26:12 | PSP Boot environmentModem Modul
ation Change: 0xff
Jan5 15:26:13 cfgmgr(fdb): Jan5 15:26:13 | Firewall NAT service started
Default Asymmetric MTU for br0 1500
Jan5 15:26:13 cfgmgr(lanbridge0): Jan5 15:26:13 | Bridge Created: br0
Default Asymmetric MTU for br1 1500
Default Asymmetric MTU for br2 1500
Please press Enter to activate this console. Doing BRCTL ...
setfilter br0 0
Jan5 15:26:15 cfgmgr(lanbridge0): Jan5 15:26:15 | Bridge VLAN0 add eth0
Jan5 15:26:15 cfgmgr(lanbridge0): Jan5 15:26:15 | Bridge VLAN AUTO OFF.
Doing BRCTL ...
vlan trailer d
Doing BRCTL ...
addif br0 eth0
Jan5 15:26:15 cfgmgr(lanbridge0): Jan5 15:26:15 | Bridge VLAN0 add eth1
Jan5 15:26:15 cfgmgr(lanbridge0): Jan5 15:26:15 | Bridge VLAN AUTO OFF.
Doing BRCTL ...
vlan trailer disable
Doing BRCTL ...
addif br0 eth1
Jan5 15:26:15 cfgmgr(lanbridge0): Jan5 15:26:15 | Bridge VLAN0 add eth2
Jan5 15:26:15 cfgmgr(lanbridge0): Jan5 15:26:15 | Bridge VLAN AUTO OFF.
Doing BRCTL ...
vlan trailer disable
Doing BRCTL ...
addif br0 eth2
Jan5 15:26:15 cfgmgr(lanbridge0): Jan5 15:26
Jan5 15:26:15 cfgmgr(lanbridge0): Jan5 15:26:15 | Bridge VLAN AUTO OFF.
Doing BRCTL ...
vlan trailer disable
Doing BRCTL ...
addif br0 eth3
usb_enable 1
device eth0 entered promiscuous mode
br0: port 1(eth0) entering learning state
Jan5 15:26:18 cfgmgr(ap): Jan5 15:26:18 | WPA Authenticator Started
Jan5 15:26:18 cfgmgr(lanbridge1): Jan5 15:26:18 | Bridge Created: br1
Jan5 15:26:18 cfgmgr(lanbridge2): Jan5 15:26:18 | Bridge Created: br2
USB: Entering USB_init_module.
USB Driver built for RNDIS
Error getting protocol configuration from bootloader environment.
Defaulting to "RNDIS-CDC" mode.
Start usb_clk_check
VID = 0x1668
PID = 0x6010
No Serial Number String present.
Manufacturer = Texas Instruments
Product description = Texas Instruments CDC Ethernet/RNDIS Adapter
USB: Entering USB_Init.
USB: Leaving USB_Init.
Default Asymmetric MTU for usb0 1500
USB: Leaving USB_init_module.
Doing BRCTL ...
setfilter br1 0
br0: port 1(eth0) entering forwarding state
br0: topology change detected, propagating
Doing BRCT
setfilter br2 0
Doing BRCTL ...
stp br0 off
Doing BRCTL ...
setigmpsnoop br0 off
Jan5 15:26:21 cfgmgr(lanbridge0): Jan5 15:26:21 | Bridge Interface Added: et
h0
Doing BRCTL ...
setfilter br0 0
Jan5 15:26:22 cfgmgr(lanbridge0): Jan5 15:26:22 | Add Bridge Iface Error: 1
Doing BRCTL ...
stp br1 off
Doing BRCTL ...
setigmpsnoop br1 off
Jan5 15:26:22 cfgmgr(lanbridge0): Jan5 15:26:22 | Add Bridge Iface Error: 1
Jan5 15:26:22 cfgmgr(sar): Jan5 15:26:22 | DSL Carrier is down
Doing BRCTL ...
stp br2 off
Doing BRCTL ...
setigmpsnoop br2 off
device usb0 entered promiscuous mode
br0: port 2(usb0) entering learning state
Default Asymmetric MTU for wlan0 1500
set bridge igmp snooping Off
Jan5 15:26:24 cfgmgr(lanbridge0): Jan5 15:26:24 | Add Bridge Iface Error: 1
Jan5 15:26:24 cfgmgr(ap): Jan5 15:26:24 | AP Driver configuration successful
378:
802.11d is 378: disabled.
378: 802.11h is 378: disabled.
378: Configuration succeeded !!!
378: WLAN driver database is up
Resetting the remote device.
Un-resetting the re
About to re-init the VLYNQ.
Re-initialized the VLYNQ.
379: AcxRegAddr = 0xA4040000, AcxMemAddr = 0xA4000000
379: whal_acxProcInitiate: found DEVICE_VENDOR ID = 0x9066104c
379: whal_acxProcInitiate: Cpu halt -> download code
379: whal_acxProcLoadFwImage: 0xa4000000, 0x0
379: whal_acxProcLoadFwImage() -- Loading FW image379: Compiled for RADIA (bg) r
adio
380: whal_acxProcLoadFwImage: 1, pBuf=0xc00bd000, len=0x15564. Extra pBuf=0x0, l
en=0x3
380: whal_acxProcLoadFwImage: 2, pBuf=0xc00bd000, len=0x15564. Extra pBuf
en=0x3
380: whal_acxProcLoadFwImage: 3, pBuf=0xc00bd000, len=0x15564, DataLen=0x1555c
381: whal_acxProcLoadFwImage: 4, pBuf=0xc00bd000, len=0x15564
381: whal_acxProcLoadFwImage: Checksum, calc=0x71e76f, file=0x71e76f
384: whal_acxProcInitiate: run
384: whal_acxProcWaitInitComplete:
br0: port 2(usb0) entering forwarding state
br0: topology change detected, propagating
389: whal_acxMboxInit: pCmdMbox=0xa401dd00, pInfoMbox=0xa401de88
389: ----------------------------------------------------------------
390: ACX Firmaware Version = Rev 1.6.0.24
390: ----------------------------------------------------------------
390: whal_acxProcConfigure: templates (beacon, probe response, tim) for Netw
ork
390: whal_acxProcConfigure: Host Queue is in 0x94D56020
390:TxQueue NumDesc= 32
390:TxQueue Priority = 0
390:TxQueue NumDesc= 32
391:TxQueue Priority = 129
391:
whal_acxConfigMemory() --
HostRxDescriptorsAddr = 14d56020
391:RxQueue NumDesc= 32
391:RxQueue Priority = 0
391:RxQueue type = 7
391:392: whal_acxProcConfigure: WEP cache
392: whal_acxProcConfigure: read queue heads
392: whal_acxConfigRead_QueueHead() -
392:RxMemBlkQ - 00016920
392:RxQueueHead - 00013f14
392:TxMemBlkQ - 0001b320
392:TxMemBlkQ- 00014594
392:TxMemBlkQ- 00014c14
392:392: whal_acxProcConfigure: configure RxQueue/TxQueue objects
393: whal_txQueue_Init: HwBaseAddr=0xa4014594, NumDesc=32
393: whal_txQueue_Init: HwBaseAddr=0xa4014c14, NumDesc=32
393: whal_ParamsPri
393: Code(0x00000000, 0x0001250c)
Wep (0x00012808, 0x00012918)
Sta (0x00012918, 0x00013f00)
Tmpl(0x00012524, 0x000125b7)
Queue (0x00013f14, 0x00015294)
Pool(0x00016920, 0x0001c720)
395: whal_apiConfig: beaconInterval = 200
WATCH_DOG_TIMER_VAL = 520
wd_beacon_limiter = 1
396: WLAN HAL layer is up
396: BssBridge is up
396: Mgmt is up
396: Rx is up
396: Tx is up
396: MemMngr is up
396: main state machine is up
416: WDRV_MAINSM: WLAN Driver initialize
416: WDRV_4X: 4x Disabled
416: WDRV_4X: Concatenation Disabled
416: WDRV_4X: Ack Emulation Disabled
417: whal_apiStartBss: Enable Tx, Rx and Start the Bss
417: ----------------------------------------------------------------
417: ----------------------------------------------------------------
417: START BSS, SSID=math, BSSID=00-20-E0-3F-FF-07
417: ----------------------------------------------------------------
417: ----------------------------------------------------------------
418:AP Power Level = 1
418:Regulatory Domain = ETSI
418: Net : Channel=7
418: ----------------------------------------------------------------
419: FW Watchdog is Enabled
dda: wlan0 in initializing Succeeded wireless extensions: ret = 0
set bridge igmp snooping Off
Jan5 15:26:30 cfgmgr(ap): Jan5 15:26:30 | AP IS UP
wlan0 device is activated
set bridge igmp snooping Off
Doing BRCTL ...
addif br0 wlan0
device wlan0 entered promiscuous mode
br0: port 3(wlan0) entering learning state
Jan5 15:26:31 cfgmgr(lanbridge0): Jan5 15:26:31 | Bridge Interface Added: wl
an0
Jan5 15:26:31 root: Jan5 15:26:31 | USB is enabled
Doing BRCTL ...
setfilter br0 0
br0: port 3(wlan0) entering forwarding state
br0: topology change detected, propagating
BusyBox v1.15.3 (2010-01-05 15:25:28 GMT) built-in shell (ash)
Enter 'help' for a list of built-in commands.
/var # br0: port 3(wlan0) entering forwarding state
br0: topology change detected, propagating GT701 太难搞了！！！ 支持高手实践！
页:
[1]