我用PL2303下载线得到的EC1308的启动信息
本帖最后由 fuckjapan1 于 2010-2-26 18:58 编辑回复 1# redcom
用超级中端，不知如何把文件导出来，导出来后，能修改MAC地址吗？
U-Boot 1.1.4 (Mar5 2009 - 11:41:36)
U-Boot code: F0500000 -> F051F880BSS: -> F0588D94
RAM Configuration:
Bank #0: f0000000 128 MB
YX NAND init:
FLASH INFORMATION:
ID:9500f1ecTYPE:K9F1G08 SIZE:128M
Serial code: 1308093xxxxx35548
Boardname: YX5531A
MAC address: 00:07:67:xx:xx:xx
normalstart
In: serial
Out: serial
Err: serial
Flash MAC->
MAC: 00-07-67-xx-xx-xx
X: Y: W: H: COLOR:
Hit any key to stop autoboot:0
bootm in nand !
## Booting image at f0008000 ...
Image Name: yslinux
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 1120824 Bytes =1.1 MB
Load Address: f0800000
Entry Point:f0800000
OK
Starting kernel ...
Uncompressing Linux.............................................................
........... done, booting the kernel.
Linux version 2.6.14-hi3560v100-pilot-test-pa-release (root@localhost.localdomai
n) (gcc version 3.4.3 (release) (CodeSourcery ARM Q3cvs 2004)) #1 Thu Dec 4 17:0
4:00 CST 2008
CPU: ARM926EJ-Sid(wb) revision 5 (ARMv5TEJ)
Machine: Hi3560v100
Memory policy: ECC disabled, Data cache writeback
CPU0: D VIVT write-back cache
CPU0: I cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets
CPU0: D cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets
Built 1 zonelists
Kernel command line: mem=64M console=ttyAMA0,115200 root=/dev/mtdblock/8 rootfst
ype=yaffs2 nand_mtdparts=phys_mapped_flash:256K(uboot),384K(nvram),640K(reserve)
,384K(config0),384K(config1),3M(kernel0),3M(kernel1),40M(root0),40M(root1),40M(r
oothome) kernel=flash0.kernel0 runlevel=1 yxip=10.0.0.239
PID hash table entries: 512 (order: 9, 8192 bytes)
Console: colour dummy device 80x30
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 64MB = 64MB total
Memory: 62464KB available (1844K code, 369K data, 76K init)
Mount-cache hash table entries: 512
HI_VERSION=LINUX_2_6_14-M05C0404B0202 @Hi3560v100_OSDrv_1_0_0_2 2008-08-14 18:53
:45
CPU: Testing write buffer coherency: ok
NET: Registered protocol family 16
Hisilicon clock system V0.01
SCSI subsystem initialized
NetWinder Floating Point Emulator V0.97 (double precision)
devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
yaffs Dec4 2008 17:01:56 Installing.
Initializing Cryptographic API
Serial: AMBA PL011 UART driver
ttyAMA0 at MMIO 0x101f1000 (irq = 12) is a AMBA/PL011
ttyAMA1 at MMIO 0x101f2000 (irq = 13) is a AMBA/PL011
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
loop: loaded (max 8 devices)
nbd: registered device at major 43
PPP generic driver version 2.4.2
NET: Registered protocol family 24
HISI_NAND-MDC040003B040002 @Hi3560v100_OSDrv_1_0_0_2 2008-08-14 19:00:48
here1!
Creating 10 MTD partitions on "NAND 128MiB 3,3V 8-bit":
0x00000000-0x00040000 : "uboot"
0x00040000-0x000a0000 : "nvram"
0x000a0000-0x00140000 : "reserve"
0x00140000-0x001a0000 : "config0"
0x001a0000-0x00200000 : "config1"
0x00200000-0x00500000 : "kernel0"
0x00500000-0x00800000 : "kernel1"
0x00800000-0x03000000 : "root0"
0x03000000-0x05800000 : "root1"
0x05800000-0x08000000 : "roothome"
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 2, 16384 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
yaffs: dev is 32505864 name is "mtdblock8"
yaffs: passed flags ""
yaffs: Attempting MTD mount on 31.8, "mtdblock8"
VFS: Mounted root (yaffs2 filesystem).
Freeing init memory: 76K
init started:BusyBox v1.1.2 (2009.08.06-08:13+0000) multi-call binary
Starting pid 174, console /dev/console: '/etc/init.d/rcS'
Execute /home/yx5531/local.rc ...
yaffs: dev is 32505865 name is "mtdblock9"
yaffs: passed flags ""
yaffs: Attempting MTD mount on 31.9, "mtdblock9"
Hisilicon Media Memory Zone Manager
HISI_DMAC-MDC040002 @Hi3560v100_OSDrv_1_0_0_2 2008-08-14 19:00:02
NETDRV_ETHV100-M03C04DB0201 @Hi3560v100_OSDrv_1_0_0_2 2008-08-14 19:00:08
hiir: init ok. ver=Feb9 2009, 16:50:31.
YuXing modify gpio driver init successful!
gpio_int init gpio interruptible number (7)
tde: module license 'Copyright(c)' taints kernel.
TDE_MAIN_VERSION Build Time
TDE_ADP_VERSION Build Time
DRV356X_init
Hisilicon UMAP device driver interface: v1.00
The Vou Clk Freq is 270
DRV356X_init ok
hifb info: HIFB_MAIN_VERSION Build Time[Aug 14 2008, 19:12:15
]
hifb info: video:vram0_size:3400000,vram1_size:5576640
hifb info: succeed in registering the fb0: ovl0 frame buffer device
hifb info: succeed in registering the fb1: ovl1 frame buffer device
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ctrlpipe_nak_limit=3, bulkpipe_nak_limit=3
hiusb-hcd hiusb-hcd.0: Hisilicon USB host controller
hiusb-hcd hiusb-hcd.0: new USB bus registered, assigned bus number 1
hiusb-hcd hiusb-hcd.0: irq 23, io base 0x80090000
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usbcore: registered new driver rt73
ys_upgrade v1.0.100, 2011.01.31-11:22:18 by root
BOOTTIMES="0"
do nothing
runlevel = 1
Hello! Welcome!
in configGet init
++++
inited!
layer GPC0=3, GPC1=2, VIDEO=1, HC=0
debug = 1
NEXT tr069_api_init
@@@@@@@@: dns0 = 202.96.134.133
@@@@@@@@: dns1 = 192.168.0.1
----load--tvms-module--
mid_usb_config_task_create
stb_syslog_setting reset =0
: ERROR! fopen = /root/
yx_config_stb_syslog.ini
@@@ @@@read stb_syslog file failed.
#################UsbConfigTask###init################
: ERROR! frame nod fond
g_keymode = 3 app_upgrade_get_key_flag() = 0
页:
[1]