DB120-WG 刷2650 RU-1.14 挂了。高手进来看看啊。
刷了D-LINK 2650U]DSL-2650U_BRU_D_RU_1.14_12182009(原生128K-CFE)。现在出问题了。这是超级终端的显示的。Board IP address : 192.168.1.1:ffffff00
Host IP address : 192.168.1.100
Gateway IP address :
Run from flash/host (f/h) : f
Default host run file name : vmlinux
Default host flash file name : bcm963xx_fs_kernel
Boot delay (0-9 seconds) : 1
Board Id (0-8) : 96358VW2
Number of MAC Addresses (1-32) : 12
Base MAC Address : 00:1e:40:4b:21:26
PSI Size (1-64) KBytes : 24
Main Thread Number : 1
web info: Waiting for connection on socket 0.
CFE>
CFE>
CFE>
web info: Waiting for connection on socket 1.
web info: Waiting for connection on socket 0.
web info: Upload 4379088 bytes, Broadcom image format.
CFE>
Flashing CFE: .
Flashing root file system and kernel at 0xbe020000: ............................
.....
.
*** Image flash done *** !
Resetting board...
CFE version 1.0.37-10.1 for BCM96358 (32bit,SP,BE)
Build Date: Tue Apr 24 15:57:24 CST 2007 (gavin@FD5)
Copyright (C) 2000-2006 Broadcom Corporation.
Boot Address 0xbe000000
Initializing Arena.
Initializing Devices.
Parallel flash device: name AM29LV320MT, id 0x2201, size 16384KB
CPU type 0x2A010: 300MHz, Bus: 133MHz, Ref: 64MHz
CPU running TP0
Total memory: 33554432 bytes (32MB)
Total memory used by CFE:0x80401000 - 0x80527C50 (1207376)
Initialized Data: 0x8041D580 - 0x8041F480 (7936)
BSS Area: 0x8041F480 - 0x80425C50 (26576)
Local Heap: 0x80425C50 - 0x80525C50 (1048576)
Stack Area: 0x80525C50 - 0x80527C50 (8192)
Text (code) segment: 0x80401000 - 0x8041D57C (116092)
Boot area (physical): 0x00528000 - 0x00568000
Relocation Factor: I:00000000 - D:00000000
** Flash image not found. **
Board IP address : 192.168.1.1:ffffff00
Host IP address : 192.168.1.100
Gateway IP address :
Run from flash/host (f/h) : f
Default host run file name : vmlinux
Default host flash file name : bcm963xx_fs_kernel
Boot delay (0-9 seconds) : 1
Board Id (0-8) : 96358VW2
Number of MAC Addresses (1-32) : 11
Base MAC Address : 00:74:04:e4:07:64
PSI Size (1-64) KBytes : 24
Main Thread Number : 0
web info: Waiting for connection on socket 0.
CFE> 你使用E N命令试试
我之前有2个RG100也是同样问题，后来出掉算数 清空一下配置看看，如果你刷的对的话 清空一下配置看看，如果你刷的对的话
sniper99999 发表于 2010-2-5 13:24 https://www.chinadsl.net/images/common/back.gif
用过了，不行。
CFE> e n
Erase nvram? (y/n):y
Resetting board...
Total memory used by CFE:0x80401000 - 0x80527C50 (1207376)
Initialized Data: 0x8041D580 - 0x8041F480 (7936)
BSS Area: 0x8041F480 - 0x80425C50 (26576)
Local Heap: 0x80425C50 - 0x80525C50 (1048576)
Stack Area: 0x80525C50 - 0x80527C50 (8192)
Text (code) segment: 0x80401000 - 0x8041D57C (116092)
Boot area (physical): 0x00528000 - 0x00568000
Relocation Factor: I:00000000 - D:00000000
Use default boot line parameters: e=192.168.1.1:ffffff00 h=192.168.1.100 g= r=f
f=vmlinux i=bcm963xx_fs_kernel d=1 p=0
** Flash image not found. **
Board IP address : 192.168.1.1:ffffff00
Host IP address : 192.168.1.100
Gateway IP address :
Run from flash/host (f/h) : f
Default host run file name : vmlinux
Default host flash file name : bcm963xx_fs_kernel
Boot delay (0-9 seconds) : 1
Board Id (0-8) : 96358VW2
Number of MAC Addresses (1-32) : 12
Base MAC Address : 00:10:18:00:00:00
PSI Size (1-64) KBytes : 24
Main Thread Number : 0
web info: Waiting for connection on socket 0.
CFE> 不能刷带CFE的固件！我的就是这么刷挂了的{{XPX8{{ 回复 4# lywkj
说明这个固件你根本没刷进去；建议你先刷回电信原版固件吧～～搜下论坛，有刷的办法的；我 懒得找 我的也是DB120-WG（3.10公版固件）刷DSL-2650U_BRU_D_RU_1.14_12182009(原生128K-CFE）也出现过LZ的情况，看到CFE还能启动就刷回3.10公版固件，然后再直接刷2次DSL-2650U_BRU_D_RU_1.14_12182009后，清了NVRAM后就可以用了 先刷2650U 1.0版的，然后在1.0的web界面升级1.14 ntfs版，都要刷两次 楼上正解
支持一个 楼上正解
支持一个
嘻嘻
页:
[1]
2