中兴 10 H108B的，大哥大姐们帮看看怎么设置
我的猫是中兴 10 H108B的，现在192.168.1.1ping不通，打不开，我用TTL下看了下好像是找不到配置文件了，看了看论坛里些帖子，想刷了他，我现在打开猫的电源，马上按空格键，没有什么CFE的提示，但是也停止加载了，晕的是网线被拔出，明明是接好的，心想可能是没有加载的过，一下是输入？好的些提示，就是不知道真么设置，大哥大姐们帮小弟看，到底怎么弄啊？Commands to the console are:
configeeprom display EEPROM configuration information
configflash display FLASH configuration information
mac <address> set MAC address
ip <address> set IP address
networkboot {yes | auto} boot auto-select Ethernet, USB or PCI
networkboot ethernet boot from Ethernet only
networkboot usb boot from USB only
networkboot pci boot from PCI only
networkboot no boot from FLASH
networkboot ask always prompt user for boot source
copyimages {yes | no} copy network booted image files
flashfs {auto | emergency}use automatic FLASHFS selection or
force boot from emergency FLASHFS
flashnetboot {yes | no} flash boots auto network boots
autolanrecover {yes | no} attempt LAN recovery if flash corrupt
initialise initialise configuration information
listenv list environment variables
setenv <key> <value> set environment variable
unsetenv <key> unset environment variable
configpci display EEPROM PCI configuration
configpci set <idx> <addr> <data>set PCI pair
dw <address> [<length>]dump words (hex/ascii)
enter <address> enter an image
erw <wrdaddress> read a single word from EEPROM
eww <wrdaddress> <value> write a single word to EEPROM
fdw <address> [<length>] dump flash words (hex/ascii)
flash config print flash configuration
help print this text
netboot perform immediate network boot
quit leave the console
reset reset system
rw <address> read a single word
why reason for console entry
ww <address> <value> write a single word
xmodem download mkflash image using X-Modem 现在192.168.1.1ping不通，IE打不开，不能上网
页:
[1]