自己乱折腾弄出个这个页面~~无语了我去哪找image文件啊 愁死我了~
arwenvc 发表于 2010-2-3 16:05 https://www.chinadsl.net/images/common/back.gif
这个情况一般是固件丢失了，需要重新下载
楼主试试在WebBoot页面下刷这个Linksys的固件能不能认
死猫当活猫医了
johngoo 发表于 2010-2-4 15:18 https://www.chinadsl.net/images/common/back.gif
我想给你做回小白鼠,只可惜刷不进去~~无奈了``我觉得不大是硬件问题 因为这个猫用的时间也不长 但是我看论坛上关于这猫好像还没有刷新固件的办法所以现在也是无计可施~
本帖最后由 arwenvc 于 2010-2-4 17:04 编辑
这是开机按 空格 出现"]" 打个问号后出来的东西 具体是什么不知道
然后在这里输入 netboot然后网页里打192.168.1.1就出来上面我说的那个中兴的所谓WEB升级页面了
ZXV10 HGW bootloader V1.9
SDRAM size = 0x2000000-------->
Hardware version is 1-------->
Processor clock speed 264.0MHz
Key pressed, stopping boot.
Entered console ... User request.
] ?
Commands to the console are:
configeeprom display EEPROM configuration information
configflash display FLASH configuration information
mac <address> set MAC address
ip <address> set IP address
networkboot {yes | auto} boot auto-select Ethernet, USB or PCI
networkboot ethernet boot from Ethernet only
networkboot usb boot from USB only
networkboot pci boot from PCI only
networkboot no boot from FLASH
networkboot ask always prompt user for boot source
copyimages {yes | no} copy network booted image files
flashfs {auto | emergency}use automatic FLASHFS selection or
force boot from emergency FLASHFS
flashnetboot {yes | no} flash boots auto network boots
autolanrecover {yes | no} attempt LAN recovery if flash corrupt
initialise initialise configuration information
listenv list environment variables
setenv <key> <value> set environment variable
unsetenv <key> unset environment variable
configpci display EEPROM PCI configuration
configpci set <idx> <addr> <data>set PCI pair
dw <address> [<length>]dump words (hex/ascii)
enter <address> enter an image
erw <wrdaddress> read a single word from EEPROM
eww <wrdaddress> <value> write a single word to EEPROM
fdw <address> [<length>] dump flash words (hex/ascii)
flash config print flash configuration
help print this text
netboot perform immediate network boot
quit leave the console
reset reset system
rw <address> read a single word
why reason for console entry
ww <address> <value> write a single word
xmodem download mkflash image using X-Modem
]
重新刷固件，最好拿去给电信返厂修吧，应该有保修期的啊
重新刷固件，最好拿去给电信返厂修吧，应该有保修期的啊
cryman 发表于 2010-2-4 17:22 https://www.chinadsl.net/images/common/back.gif
淘宝上买的 换不了啦 全当研究用品了
嘻嘻，学习了。
找个固件，重新更新了。
插插PP试试， 那个PP是恢复出厂设置的