求助:RG100A连TTL出现这样的信息。
Boot Address 0xbe000000Initializing Arena.
Initializing Devices.
Parallel flash device id 0279 is not supported.
*** Board is not initialized properly ***
Press:<enter> to use current value
'-' to go previous parameter
'.' to clear the current value
'x' to exit this command
96358VW2 ------- 0
96358VW ------- 1
96358GWVG ------- 2
96358MV2G ------- 3
96358M ------- 4
96358B ------- 5
96358BGWE_OEM1 ------- 6
96359PONG ------- 7
96358SV ------- 8
Board Id (0-8) :
请教各位高人,连接TTL开电源出现这样的信息是什么问题? 选0然后选 24 然后MAC地址 好像不止这些选项,依次是:
Board Id (0-8) :0
Number of MAC Addresses (1-32) :0
Base MAC Address :00:00:00:00:00:00
PSI Size (1-64) KBytes :24
Flash Block Size (1-128) in KBytes:0
Auxillary File System Size Percent:0
Main Thread Number :0
这一步确认后会把读取很多内存地址信息,
RG100A是商务领航版,WEB刷固件后不能工作,所以找了TTL线来刷但是连线后是这样的信息,不知道改如何解决。 好像不止这些选项,依次是:
Board Id (0-8) :0
Number of MAC Addresses (1-32) :0
Base MAC Address :00:00:00:00:00:00
PSI Size (1-64) KBytes :24
Flash Block Size (1-128) in KBytes:0
Auxillary File System Size Percent:0
Main Thread Number :0
这一步确认后会把读取很多内存地址信息,
RG100A是商务领航版,WEB刷固件后不能工作,所以找了TTL线来刷但是连线后是这样的信息,不知道改如何解决。 没有人知道这些选项应该如何配置吗? Board Id (0-8) :0
Number of MAC Addresses (1-32) :11(12)都行
Base MAC Address :00:00:00:00:00:00(00:e2:35:c5:62:11) 12位地址
PSI Size (1-64) KBytes :24
Flash Block Size (1-128) in KBytes:0 (25)0不能启动改25
Auxillary File System Size Percent:0
Main Thread Number :0 (0,CFE刷新只能接LAN4,1可接LAN1~3) 如果是新版的,貌似怎么选都没用了 Board Id (0-8) :0
Number of MAC Addresses (1-32) :12
Base MAC Address :00:00:00:00:00:00(MAC.看外壳)
PSI Size (1-64) KBytes :24
Flash Block Size (1-128) in KBytes:0
Auxillary File System Size Percent:0
Main Thread Number :0
应该可以的
页:
[1]