中兴H108B 1.1版本 连接TTL成功如何查看超级密码，命令是多少？
在网上按照教程找的参数，可惜不知道那个是超级密码，不知道是不是搜的对的文件。 传给大家帮忙看下<item>"moduleid", "212"</item>) module rt_do_msg, msg b0
<item>"status", "1"</item>
1
ROUTE(0x10251) module rt_do_msg, key bridg
</row>
</physif>
<baseif id="1082"> PROUTE(0x10252) module pr
<row id="0">
<item>"ifname", "eth0"</item> PROUTE(0x10252) module pr_do_msg, key br
<item>"ifrealname", "eth0"</item>
<item>"parentif", "ETH0"</item>
= 35 ex
<item>"type", "0"</item>
handleUDPEXSignal:
<item>"status", "1"</item>
<item>"phase", "3"</it
l
</row>
WEPKey(0x6
<row id="2"> called quit ok
<item>"ifname", "eth1"</item>
<item>"ifrealname", "eth1"</item>114) module webd start
get
<item>"parentif", "ETH1"</item> IP(0x80232) module ip_do_cmd, cmd 5
<item>"type", "0"</item>
<item>"status", "1"</item>VICE PIN: 18067712
<item>"phase", "3"</item>e:0,userright:0,tartsend dev info~~~~
<item>"srvnum", "0"</item> CMD(0x004) module cmd_get_media_type,m
<item>"brname", "bridge0"</item>
ediatype:0,userright:0,
</row>
<
in trans
<item>"status", "1"</item>
CMD(0x004
<item>"phase", "5"</item> pConfig->port=
<item>"srvnum", "0"</item>x10251) mod pConfig->userName
<item>"connname", ""</item>cmd, cmd 5
</row>_get_media_type,mediat
<row id="4">
<item>"ifname", "usb0"IP(0x80232) module ip_
SHADOW_FILE
<item>"srvnum", "0"</item> CMD(0x004)
<item>"brname", "bridge0"</item>le end trans
ZXV10-H108B login: root ro
</row>
Password:
<row id="5">
E3Uhbo
ZXV10-H108B
<item>"ifname", "wlan0"</item> *******re
Login incorrect*******
<item>"ifrealn
Password:
QOSTEMPLET_QUEUE(0x10308) module
<item>"brname", "bridge0"</item>
r
</row>ord:
root
<row id="7">ev/ttyS0: '/sbin/ge
<item>"ifname", "eth3"</item>in:
ZXV10-H108B login: root root08B
<item>"ifrealname", "eth3"</item>Login incorrect manage:
ZXV10-H108B login: Pas
<item>"parentif", "ETH3"</item>
ZXV10-H108B login: root root
<item>"type", "
root
<item>"srvnum", "N/A"</item> <row id="0">
<item>"wcdnum", "1"</item>TR069(0x112) module TR069 process start success!
</row> </row>
<row id="9">
</rcS>
<item>"ifname", "DSL0.PVC0.WB0"</item>
<to>750</to>
<us
<item>"ifrealname", "nbif0"</item>="0">
<item>"parentif", "DSL0.PVC0"</item>
<item>"enable", "1"</i
<item>"type", "5"</item>fig b
<item>"password",
<item>"status", "1"</item> MSG(0x003) module d
<ite
<item>"servicename", ""</item> <row id="0">
<item>"servicetype", "2"</item>/item>an connection!
<item>"status", "Connected"</item>"root"</item>
<item>"mask", "255.255.255.0"</item>e", "yes"</item>ace wlan0 into bridge br0
<item>"ip", "192.168.1.1"</item>erenable", "no"</item> e
</row>
<row id="1">, "admin"</item>
<item>"ifname", "DSL0.PVC0.WB0.ppp0"</item> <item>"commonuserpass", "admin"</item>
<item>"baseif", "DSL0.PVC0.WB0"</item><item>"serverport", "21"</item>(wlan0) entering learning sta
<item>"status", "Discow>
</
<item>"service", "PPP"</item>", "0"</item>
br0: port 1(wlan0) entering
<item>"conntype", "PPPoE"</item>em>
BRIDGE(0x40224) module add a interface eth0 int
<item>"connname", "9_TR069_INTERNET_R_0_35"</item>
<item>"userpass",
<item>"ip", "N/A"</item>
</row> mode
<item>"servicename", "TR069_INTERNET"</item> <pppoehide id="710">
<r
<item>"servicetype", "2"</item> <item>"enable", "0"</item>
</row>
</serviceif>e
</pp
<eth id="1025"> a
<usbres_en
<row id="0">
</row
</row>
<row
<row id="3">serrig
<item>"pvid", "1"</item> IFCORE(
</row
<item>"vlankey", "eth0.1"</item>
<portgroup2 id="1002">uccessfully!
<item>"bridgekey", "bridge0"</item> <portgroup3 id="1003">0.WB0.pp
</row>
</eth>roup4 id="1004
<vlan id="1005">nntype
</portgro
</vlan>
</lan>ngroup
<ipsec>1">
<from>1100</from> <row id="
<to>1200</to>_name=9_T
<connection id="1100">"eth0"</item>
</connection>
<rsakey id="1101">/A&maxuser=N/
</rsakey>
<to>1800</to>tem>"interface", "eth
<connection id="1700">
</connection>row>
e 9_TR069_I
<wan_device id="1703">">
<row id="0">m>"interface", "eth3"</item>
<item>"own_key", "DSL0"</item>
</row>
<item>"father_key", "IGD"</item> <item>"interface", "wlan0"</item>
52)
<item>"wan_access_type", "DSL"</item> </row>R_0
</langroup1>
</row> <langroup2 id="1022">
</wan_device> IP
</lan
<conn_device id="1704"> <langroup3 id="1023">
<row
<item>"share_pvc", "1"</item>dhcpnetmask", "255.255.255.0"</item>module start udhc
</row>
</conn_device> <item>"gateway"
<ppp_conn id="1705">module start udhcp
<row id="0"> <item>"
<item>"own_key", "DSL0.PVC0.WB0.ppp0"</item>cond 110 tick
<item>"leasetime", "86400"</i
<item>"father_key", "DSL0.PVC0.WB0"</item> <item>"srvaddr", "192.168.1.1"</item>
<item>"enable", "1"</item>
<item>"wanif", ""</item>
<item>"conn_trigger", "AlwaysOn"</i <item>"lansng for br0
ROUTE(0x10251) modul
<item>"net
<item>"user_name", "jtwg@jtwg"</item>
<item>
<item>"password", "qxxfh720530888"</item>
<item>"stp", "0"</item>onnection Suc
<item>"auth_type", "AUTO"</item><item>"iptype", "1"</item>
<item>"max_MRU", "1500"</item>pstart", "192.168.2.100"</item>
<item>"MRU", "1460"</item> <item>"ipend", "192.168.2.200"</item
<item>"NAT_enable", "1"</item>
<item>"dhcpnetmask", "
<item>"echo_time
<ip_conn id="1706">0x10252) modu
</ip_conn> <item>
<xcrc id="1710">
le pr_do_msg, msg b0
<row id="0"> <item>"iptype", "1
<item>"enable", "1"</item>
<item>"ipstart", "
</row>
</xcrc> Ingress(0x1030
<wanbridge id="1708"><item>"ipend", "192.168.3.2
<row id="0">e pBuffer = |&connname=langr
<item>"key", "DSL0.PVC0.WB0"</item>"255.255.255.0"</item> Ingress(0x10304) module as la
<item>"fatherkey", "DSL0.PVC0"</item>gateway", "192.168.3.1"</item>， ingress rule on which enabled
<item>"mux", "1"</item> <item>"domain", "zte.com.cn"</item>e msg
<item>"wanbr", "0"</item>
<item>"dns", "192.16
<ite
<item>"father_if", "nas0"</item>tem>"srvaddr", "192.168.3.1"</item>
<item>"create_if", "nbif0"</item>/row>time stat] use 4 secx0
<row id="3">
</row>
</wanbridge>, "192.168.4.1"</ite
<area id="1711">,from module id i
<row id="0"> <item>"netmask", "25
<item>"areacode", "CNC_B6"</item> module deal_unicast_msg
<item>"m
</row>
COR
</area>
<selflearn id="1712">0"</item>stat] use 11
<row id="0"> <item
<item>"selfbind", "0"
fconfi
<item>"
<item>"bind_mod", "0"</item>
</row>n", "zte.com.cn"</item
<row id="1">
<item>"interface", "eth1"</item>tem>9(0x112) mod
<item>"bind_grp", "0"</item>8.4.1"</item>ccessfully __key_para_get.para_
<item>"bind_mod", "0"</item>leasetime", "86400"</item>
an
</row> Faile
<row id="3">to read 32!
<item>"interface", "eth3"</item>wn_key", "apl1_0"</item>ice.DeviceInfo.X_CT-COM_Middlewa
<item>"bind_grp", "0"</item>m>"dev_name", "HGW"</item>
gtIPAddress=8&I
<item>"bind_mod", "0"</item><item>"dev_key", "HGW"</item>
</row>
<row id="4">item>nfo.X_CT-COM_Middleware
<item>"interface", "wlan0"</item>p_start", "192.168.1.61"</item>ra_get.par
etGatewayDevic
<item>vNotif
<row id="7">ternetGatewayDev
<item>"interface", "wlan3"</item> <item>"father_key", "bridge0.IP0"</item>gtIPA
<item>"bind_grp", "0"</item>
<item>"own_key", "apl
<item>"bind_mod", "0"</item>
<item>"dev_na
</row>Mgt. X_CT-COM_VLANDevi
</lanport>
<wanport id="1714">v_key", "Camera"</item>
<row id="0">
<item>"interface", "DSL0.PVC0.WB0.ppp0"</item>
<item>"ip_start", "192.1
<item>"bind_grp", "0"</item>ion getObject: ERROR: par
<i
<item>"mac", "N/A"</item>07) module add_second_
wayDevice.DeviceInfo.X_
<item>"forbidden", "N/A"</i <row id="3">
<row id="0">y", "Phone"</item>
<item>"wireless_mode", "3"</itReadOwnMsg none<item>"mode", "1"</item> env t
em>
<item>"country_code", "156"</item>> tr069l : 32768 bytes
<item>"channel_select", "auto"</item>/item>netGatewayDevice.DeviceInfo.X_CT-COM_MiddlewareMgtLL
<item>"txrate_select", "auto"</item> <row id="4">serIPAddress1, attr:81) modu
<item>"beacon_interval",: E ---dsl
<item>"tx_power", "1"</item> tr069 adds no
<item>"radio_on", "1"</item>em>
_param_notity:fail get getOb
<item>"wlan0", "1"</item>> Function getObject: ERROR: param
<item>"wlan0_vlan", "1"</item>"</item> = 100 tick
ewayDevice.D
<item>"wlan0_prior", "0"</item> "192.168.1.40"</item>
<item>"wlan0_bridge", ""</item>
</addrpool>
<item>"wlan1_vlan", "2"</item>
</dhcp_bind1>ction getObject: ERRO
<item>"wlan1_prior", "0"</item> wl
</dhcp_bind2>
nf
isfs filename = /isfs/paed.w
<item>"wlan3_essid", "SSID4"</item>sb0,wlan0,eth0,eth1,eth2,eth3,"</itfilename = /etc/wsc_conf
<item>"wlan2_essid", "SSID3"</item>
<item>"stp", "off"</item>
<item>"wlan1_essid", "SSID2"</item> <item>"name", "langroup1"</item>ernetGatewayDevice.
<item>"wlan0_essid", "CNC_ryW3"</item>item>"hellotime", "2"</item>
t. X_CT-COM_
</row> <
</param>", "5"</item>
<security id="1901">m_notity no notify
<row id="0">agetime", "20"</item>
<item>"wlan0_enh_security", "0"</item> <item>"br_name", "br0"</item
rt wps ..........
<item>"devtype", "DSL"</item
<item>"wlan0_defkey", "1"</item> <item>"flag", "1"</item>
<item>"wlan0_authselect", "1"</item><item>"capability", "8"</item>x20213) module wlan0 interfa
<item>"wlan0_wkey0", ""</item>m>"moduleid", "211"</item>
Functi
<item>"wlan0_wkey1", ""</item>
<row id="1">AN module
<item>"wlan0_wkey2", ""</item>, "ETH0"</item>LANDevice 0) is wrong4
<item>"wlan0_wkey3", ""</item>TH"</item>
<item>"wlan0_WpaEapIp", ""</item>em>"key", "WLAN0"</item> tr069 add_param_n
set h32
<item>"wlan0_WpaEapSecret", ""</item>TH"</item>tity:szPath:InternetGatewayDevice.DeviceInfo.X_CT-C
<item>"wlan3_WpaEapSecret", ""</item>(0x110401) module SFS alg, type 8, va
<item>"wlan3_WpaEapIp", ""</item>rnetGatewayDevice.DeviceInf
<item
<item>
<item>"wlan3_WpaEncryptType", "0"</item> <item>"flag", "0"</item>
ceInfo.X_CT-COM_MiddlewareM
<item>"wlan3_wkey3", ""</item>ability", "0"</item>
<item>"wlan3_wkey2", ""</item>tus", "0"</item>
<item>"wlan3_wkey1", ""</item>"008"</item>rnetGatewayDevice.DeviceInfo.X_CT-COM_Midd
<item>"wlan3_wkey0", ""</item>
<item>"wlan2_WpaEapIp", ""</item>
<item>"wlan2_wpa2_type", "1"</item>
<item>"wlan2_WpaKey", "12345678"</item>
<item>"wlan2_WpaType", "1"</item>
<item>"wlan2_GroupRekey", "600"</item>
<item>"wlan2_WpaEncryptType", "0"</item>
<item>"wlan2_wkey3", ""</item>
<item>"wlan2_wkey2", ""</item>
<item>"wlan2_wkey1", ""</item>
<item>"wlan2_wkey0", ""</item>
<item>"wlan2_authselect", "1"</item>
<item>"wlan2_defkey", "1"</item>
<item>"wlan2_chartype", "0"</item>
<item>"wlan2_sectype", "2"</item>
<item>"wlan2_status", "0"</item>
<item>"wlan2_enh_security", "0"</item>
<item>"wlan1_WpaEapSecret", ""</item>
<item>"wlan1_WpaEapIp", ""</item>
<item>"wlan1_wpa2_type", "1"</item>
<item>"wlan1_WpaKey", "12345678"</item>
<item>"wlan1_WpaType", "1"</item>
<item>"wlan1_GroupRekey", "600"</item>
<item
#
<row id="3">
<item>"8021pmode", "0"</item>
<item>"enableDSCPmark", "0"</item>
<item>"enableforceweight", "0"</item>
<item>"plan", "0"</item>
<item>"bandwidth", "0"</item>
<item>"enable", "0"</item>
<item>"mode", "4"</item>
</row>
</qostemplet>
<qostempletrule id="2194">
<row id="21">
<item>"key", "3_1"</item>
<item>"order", "1"</item>
<item>"protocol", "TCP,UDP"</item>
<item>"tr069type", "LANInterface"</item>
<item>"tr069_max", "InternetGatewayDevice.LANDevice.1.LANEthernetInterfaceConfig.2."</item>
<item>"tr069_min", "InternetGatewayDevice.LANDevice.1.LANEthernetInterfaceConfig.1."</item>
<item>"In_Inter_Max", "eth1"</item>
<item>"In_Inter_Min", "eth0"</item>
<item>"vlanpriomark", "0"</item>
<item>"dscpmark", "0"</item>
<item>"queue", "1"</item>
</row>
<row id="31">
<item>"key", "4_1"</item>
<item>"order", "1"</item>
<item>"protocol", "TCP,UDP"</item>
<item>"tr069type", "LANInterface"</item>
<item>"tr069_max", "InternetGatewayDevice.LANDevice.1.LANEthernetInterfaceConfig.2."</item>
<item>"tr069_min", "InternetGatewayDevice.LANDevice.1.LANEthernetInterfaceConfig.1."</item>
<item>"In_Inter_Max", "eth1"</item>
<item>"In_Inter_Min", "eth0"</item>
<item>"vlanpriomark", "0"</item>
<item>"dscpmark", "0"</item>
<item>"queue", "2"</item>
</row>
</qostempletrule>
<qostempletapp id="2195">
<row id="0">
<item>"queue", "1"</item>
<item>"name", "TR069"</item>
<item>"key", "1_TR069"</item>
</row>
<row id="2">
<item>"queue", "1"</item>
<item>"name", "VOIP"</item>
<item>"key", "2_VOIP"</item>
</row>
<row id="3">
<item>"queue", "2"</item>
<item>"name", "TR069"</item>
<item>"key", "2_TR069"</item>
</row>
<row id="4">
<item>"queue", "2"</item>
<item>"name", "TR069"</item>
<item>"key", "3_TR069"</item>
</row>
<row id="6">
<item>"key", "4_VOIP"</item>
<item>"name", "VOIP"</item>
<item>"queue", "1"</item>
</row>
<row id="7">
<item>"key", "4_TR069"</item>
<item>"name", "TR069"</item>
<item>"queue", "3"</item>
</row>
</qostempletapp>
<qostempletqueue id="2196">
<row id="0">
<item>"queueshow", "1"</item>
<item>"enable", "1"</item>
<item>"key", "1_1"</item>
</row>
<row id="1">
<item>"queueshow", "2"</item>
<item>"enable", "0"</item>
<item>"key", "1_2"</item>
</row>
<row id="2">
<item>"queueshow", "3"</item>
<item>"enable", "0"</item>
<item>"key", "1_3"</item>
</row>
<row id="3">
<item>"queueshow", "4"</item>
<item>"enable", "1"</item>
<item>"key", "1_4"</item>
</row>
<row id="4">
<item>"queueshow", "1"</item>
<item>"enable", "1"</item>
<item>"key", "2_1"</item>
</row>
<row id="5">
<item>"queueshow", "2"</item>
<item>"enable", "1"</item>
<item>"key", "2_2"</item>
</row>
<row id="6">
<item>"queueshow", "3"</item>
<item>"enable", "0"</item>
<item>"key", "2_3"</item>
</row>
<row id="7">
<item>"queueshow", "4"</item>
<item>"enable", "1"</item>
<item>"key", "2_4"</item>
</row>
<row id="8">
<item>"queueshow", "1"</item>
<item>"enable", "1"</item>
<item>"key", "3_1"</item>
</row>
<row id="9">
<item>"queueshow", "2"</item>
<item>"enable", "1"</item>
<item>"key", "3_2"</item>
</row>
<row id="10">
<item>"queueshow", "3"</item>
<item>"enable", "0"</item>
<item>"key", "3_3"</item>
</row>
<row id="11">
<item>"queueshow", "4"</item>
<item>"enable", "1"</item>
<item>"key", "3_4"</item>
</row>
<row id="12">
<item>"queueshow", "1"</item>
<item>"enable", "1"</item>
<item>"key", "4_1"</item>
</row>
<row id="13">
<item>"queueshow", "2"</item>
<item>"enable", "1"</item>
<item>"key", "4_2"</item>
</row>
<row id="14">
<item>"queueshow", "3"</item>
<item>"enable", "1"</item>
<item>"key", "4_3"</item>
</row>
<row id="15">
<item>"queueshow", "4"</item>
<item>"enable", "1"</item>
<item>"key", "4_4"</item>
</row>
</qostempletqueue>
<err id="2199">
</err>
</app>
<firewall>
<from>2200</from>
<to>2300</to>
<filter id="2200">
</filter>
<ac id="2201">
</ac>
<pf id="2202">
</pf>
<dmz id="2203">
</dmz>
<laniso id="2204">
</laniso>
<macfilter id="2205">
</macfilter>
<nat id="2206">
</nat>
<fwtop id="2207">
<row id="0">
<item>"level", "4"</item>
<item>"spi_enable", "0"</item>
<item>"ids", "0"</item>
<item>"sip_alg", "0"</item>
<item>"h323_alg", "1"</item>
<item>"rtsp_alg", "1"</item>
<item>"l2tp_alg", "1"</item>
<item>"ipsec_alg", "1"</item>
</row>
</fwtop>
<err id="2208">
</err>
</firewall>
<port_trigger>
<from>3000</from>
<to>3010</to>
</port_trigger>
<wf_projmanager>
<from>3050</from>
<to>3059</to>
<wf_proj id="3050">
</wf_proj>
<wf_dfproj id="3051">
</wf_dfproj>
<setting id="3052">
<row id="0">
<item>"num", "0"</item>
<item>"dfnum", "0"</item>
<item>"optnum", "7"</item>
<item>"timeenable", "0"</item>
<item>"0", "lantype"</item>
<item>"1", "lancontent"</item>
<item>"2", "ruleid"</item>
<item>"3", "weekday"</item>
<item>"4", "starttime"</item>
<item>"5", "endtime"</item>
<item>"6", "timeenable"</item>
</row>
</setting>
</wf_projmanager>
<wf_rulemanager>
<from>3060</from>
<to>3069</to>
<wf_rule id="3060">
</wf_rule>
<wf_dfrule id="3061">
</wf_dfrule>
<setting id="3062">
<row id="0">
<item>"num", "0"</item>
<item>"dfnum", "0"</item>
<item>"optnum", "3"</item>
<item>"0", "urlkey"</item>
<item>"1", "datakey"</item>
<item>"2", "description"</item>
</row>
</setting>
</wf_rulemanager>
<syslog>
<from>1300</from>
<to>1400</to>
<syslogcon id="1300">
<row id="0">
<item>"server_enable", "0"</item>
<item>"server_ip", ""</item>
<item>"level", "5"</item>
<item>"auto_save", "1"</item>
<item>"save_intrvl", "60"</item>
<item>"log_file_size", "50"</item>
<item>"system_log", "/var/log/systemp"</item>
<item>"secure_log", "/var/log/secutemp"</item>
<item>"enable_syslogd", "0"</item>
</row>
</syslogcon>
</syslog>
<syspara>
<from>4000</from>
<to>4100</to>
<din id="4001">
<row id="0">
<item>"ProvisioningCode", "TLCO.GRP2"</item>
<item>"ManuFacturer", "ZTE"</item>
<item>"ManuFactureroui", "00D0D0"</item>
<item>"ModelName", "H108B"</item>
<item>"Description", "HomeGateWay"</item>
<item>"ProductClass", "H108B"</item>
</row>
</din>
<igd id="4002">
<row id="0">
<item>"DeviceSummary", "Summary"</item>
</row>
</igd>
<dcf id="4003">
<row id="0">
<item>"ConfigFile", "/etc/board.conf"</item>
</row>
</dcf>
<mans id="4004">
<row id="0">
<item>"UpgradesManaged", "0"</item>
<item>"ParameterKey", ""</item>
<item>"ConnectionRequestURL", ""</item>
<item>"DefaultWan", ""</item>
<item>"URL", "http://jtwg.inhe.net:9090/ACS-server/ACS"</item>
<item>"Username", "cpe"</item>
<item>"Password", "cpe"</item>
<item>"ConnectionRequestUsername", "acs"</item>
<item>"ConnectionRequestPassword", "acs"</item>
<item>"PeriodicInformEnable", "1"</item>
<item>"PeriodicInformInterval", "43200"</item>
<item>"PeriodicInformTime", "0001-01-01T00:00:00Z"</item>
<item>"Tr069Enable", "1"</item>
</row>
</mans>
<event id="4020">
<row id="0">
<item>"event_command", ""</item>
<item>"BOOTSTRAP", "1"</item>
<item>"ssl_auth", "0"</item>
</row>
</event>
<version id="4021">
<row id="0">
<item>"version", "V1.0.0T6"</item>
</row>
</version>
<endflag id="4099">
<row id="0">
<item>"endflag", "1"</item>
</row>
</endflag>
</syspara>
# ReadOwnMsg none
ReadOwnMsg none
ReadOwnMsg none
---dsl is off--
Resetting PLL
Starting PLL
PLL successfully restarted
QOSTEMPLET_QUEUE(0x10308) module qq_config, acCmd tc qdisc del dev bunatm root
QOSTEMPLET_QUEUE(0x10308) module qq_config, acCmd2 ifconfig bunatm down
---dsl is off--
QOSTEMPLET_QUEUE(0x10308) module qq_config, acCmd tc qdisc del dev bunatm root
QOSTEMPLET_QUEUE(0x10308) module qq_config, acCmd2 ifconfig bunatm down
ReadOwnMsg none
ReadOwnMsg none
ReadOwnMsg none
#
# ReadOwnMsg none
in trans status cmd from:webd
*---dsl is off--
Resetting PLL
*********Inside webd_do_cmd******
WEBD(0x114) module handle:eagleeyes.com.cn trying to login, failed!
MGR_OK != iRet
WEBD(0x114) module have been configed successfully
in trans status cmd from:webd
CMD(0x004) module end trans
**********Inside webd_do_cmd******
Starting PLL
PLL successfully restarted
QOSTEMPLET_QUEUE(0x10308) module qq_config, acCmd tc qdisc del dev bunatm root
QOSTEMPLET_QUEUE(0x10308) module qq_config, acCmd2 ifconfig bunatm down
---dsl is off--
QOSTEMPLET_QUEUE(0x10308) module qq_config, acCmd tc qdisc del dev bunatm root
QOSTEMPLET_QUEUE(0x10308) module qq_config, acCmd2 ifconfig bunatm down
ReadOwnMsg none
in trans status cmd from:webd
**********Inside webd_do_cmd******
WEBD(0x114) module:trying to login, failed!
MGR_OK != iRet
WEBD(0x114) module have been configed successfully
in trans status cmd from:webd
CMD(0x004) module end trans
**********Inside webd_do_cmd******
ReadOwnMsg none
ReadOwnMsg none
in trans status cmd from:webd
**********Inside webd_do_cmd******
WEBD(0x114) module cpe:cpe trying to login, failed!
WEBD(0x114) module 104032 the times of failed login is 3
MGR_OK != iRet
WEBD(0x114) module have been configed successfully
in trans status cmd from:webd
CMD(0x004) module end trans
**********Inside webd_do_cmd******
ReadOwnMsg none
---dsl is off--
Resetting PLL
Starting PLL
PLL successfully restarted
QOSTEMPLET_QUEUE(0x10308) module qq_config, acCmd tc qdisc del dev bunatm root
QOSTEMPLET_QUEUE(0x10308) module qq_config, acCmd2 ifconfig bunatm down
---dsl is off--
QOSTEMPLET_QUEUE(0x10308) module qq_config, acCmd tc qdisc del dev bunatm root
QOSTEMPLET_QUEUE(0x10308) module qq_config, acCmd2 ifconfig bunatm down
#
#
#
# in trans status cmd from:webd
**********Inside webd_do_cmd******
WEBD(0x114) module ConnectionRequestUsername:ConnectionRequestPassword trying to login, failed!
WEBD(0x114) module 104032 the times of failed login is 4
MGR_OK != iRet
WEBD(0x114) module have been configed successfully
in trans status cmd from:webd
CMD(0x004) module end trans
**********Inside webd_do_cmd******
ReadOwnMsg none
ReadOwnMsg none
ReadOwnMsg none
# ReadOwnMsg none
in trans status cmd from:webd
**********Inside webd_do_cmd******
WEBD(0x114) module queueshow:enable trying to login, failed!
WEBD(0x114) module 104032 the times of failed login is 5
MGR_OK != iRet
WEBD(0x114) module have been configed successfully
in trans status cmd from:webd
CMD(0x004) module end trans
**********Inside webd_do_cmd******
---dsl is off--
Resetting PLL
Starting PLL
PLL successfully restarted
QOSTEMPLET_QUEUE(0x10308) module qq_config, acCmd tc qdisc del dev bunatm root
QOSTEMPLET_QUEUE(0x10308) module qq_config, acCmd2 ifconfig bunatm down
---dsl is off--
QOSTEMPLET_QUEUE(0x10308) module qq_config, acCmd tc qdisc del dev bunatm root
QOSTEMPLET_QUEUE(0x10308) module qq_config, acCmd2 ifconfig bunatm down
# in trans status cmd from:webd
**********Inside webd_do_cmd******
WEBD(0x114) module enable:queueshow trying to login, failed!
WEBD(0x114) module 104032 the times of failed login is 6
MGR_OK != iRet
WEBD(0x114) module have been configed successfully
in trans status cmd from:webd
CMD(0x004) module end trans
**********Inside webd_do_cmd******
ReadOwnMsg none
ReadOwnMsg none
ReadOwnMsg none
ReadOwnMsg none
---dsl is off--
Resetting PLL
Starting PLL
PLL successfully restarted
QOSTEMPLET_QUEUE(0x10308) module qq_config, acCmd tc qdisc del dev bunatm root
QOSTEMPLET_QUEUE(0x10308) module qq_config, acCmd2 ifconfig bunatm down
---dsl is off--
QOSTEMPLET_QUEUE(0x10308) module qq_config, acCmd tc qdisc del dev bunatm root
QOSTEMPLET_QUEUE(0x10308) module qq_config, acCmd2 ifconfig bunatm down
#
# in trans status cmd from:webd
**********Inside webd_do_cmd******
WEBD(0x114) module 8021pmode:enableDSCPmark trying to login, failed!
WEBD(0x114) module 104032 the times of failed login is 7
MGR_OK != iRet
WEBD(0x114) module have been configed successfully
in trans status cmd from:webd
CMD(0x004) module end trans
**********Inside webd_do_cmd******
ReadOwnMsg none
in trans status cmd from:webd
**********Inside webd_do_cmd******
WEBD(0x114) module telecomadmin:61349653 trying to login, failed!
WEBD(0x114) module 104032 the times of failed login is 8
MGR_OK != iRet
WEBD(0x114) module have been configed successfully
in trans status cmd from:webd
CMD(0x004) module end trans
**********Inside webd_do_cmd******
ReadOwnMsg none
in trans status cmd from:webd
**********Inside webd_do_cmd******
WEBD(0x114) module telecomadmin:telecomadmin61349653 trying to login, failed!
WEBD(0x114) module 104032 the times of failed login is 9
MGR_OK != iRet
WEBD(0x114) module have been configed successfully
in trans status cmd from:webd
CMD(0x004) module end trans
**********Inside webd_do_cmd******
ReadOwnMsg none 同样疑惑，如何查看超级密码，命令是多少？
谢谢师哥师姐，祝大家春节愉快，万事如意！ <item>"user_name", "jtwg@jtwg"</item>
<item>
<item>"password", "qxxfh720530888"</item>
页:
[1]