v0.06 PLL w ln p08 zi
Solos 461x PP boot v1.5
SDRAM size = 0x2000000
Processor clock speed 264.0MHz
@@@@@@@@@@@@@Disable watchdog.
cd
Solos 461x Network boot v1.19 (00000000)(FLASH)
MAC 00:22:33:44:55:66
SDRAM 0x02000000 bytes
Phy reset line on GPIO 4
192.168.1.1
Phy reset line on GPIO 4
(Hold '*' during reset for prompt)
Check multicast upgrade packets
Boot from Ethernet Port
v0.06 PLL w ln p08 zipacket, boot normally!
Solos 461x PP boot v1.5
SDRAM size = 0x2000000
Processor clock speed 264.0MHz
--- Check Tag CRC success,System Type: DUAL.
Start up info: SLAVE_S.
ulFsOffset: ae0000ulFsLen: 3530752ulFsOffset: 11403264
Finding flashfs partition...done.
PPB: image.a_magic = 0xea000006
PPB: image.a_text = 0x000012a0
PPB: image.a_data = 0x000b6cc0
PPB: image.a_bss = 0x0016e3fc
PPB: image.a_syms = 0x00000000
PPB: image.a_entry = 0x00030020
PPB: image.a_trsize = 0x00000000
PPB: image.a_drsize = 0x00000000
Image 'image' is a Linux kernel
Trying to load initrd...none found
Calling Configure_NVS_FromFile.
Flash size is 0x01000000. sdram size = 0x02000000.
LZMA 4.05
init started:BusyBox v1.00 (2010.06.03-09:37+0000) multi-call binary
RCS DONE
Loading Conexant BSP...
BASE MAC ADDRESS 00:22:33:44:55:66
Starting Conexant drivers
. msc16 loaded
.starting task turbo_WhipTask
DSL MSC16 imem 4096, dmem 2048
DSL MSC16 version 1.3
.msc16_load_file returned 0
sram_buffer : 0xffa01d60 addr : 0x70001d60
Passing command buffer 70001d60 to MSC16
.
Conexant drivers started
Loading Wireless ...
Load CX50221 Reading True PDA ..
Creating Delt char device
Loading drivers and kernel modules...
131
Waiting for cli start!- enter the msg
/===enter the log
\TSP_DBGetPara ok ulPort = 23
-----------CLI_Init------------
|ulRet=0 in CLI_Init
/
Cwmp initing...
CWMP version: ATP cwmp v2.5
bootok
Welcome Visiting HuaweiHome Gateway
Copyright by Huawei Technologies Co., Ltd.Error -2 writing a1 of port BisBCabine
tMode:Enable
Login:start main
Error -2 writing a1 of port AutoSRA:Disable
FILE: mid.c, LINE: 416
midcom:core program return, pid:185
FILE: mid.c, LINE: 435
Enter into func:MidCom_MngTaskStart
FILE: mid.c, LINE: 1086
Enter into func:Mid_ProcessTask
FILE: mid.c, LINE: 486
Enter into func:Mid_Connect
FILE: mid.c, LINE: 975
Enter into func:Mid_ModuleRegister
FILE: mid.c, LINE: 578
Mid_CreateInformPara
setoid wl0 17000008 long 120
WIRELESS is off
port_no -1 not surported, br:br0, port:wl0.0
device wl0.0 is not a slave of br0
port_no -1 not surported, br:br0, port:wl0.1
interface wl0.1 does not exist!
port_no -1 not surported, br:br0, port:wl0.2
interface wl0.2 does not exist!
port_no -1 not surported, br:br0, port:wl0.3
interface wl0.3 does not exist!
SIOCGIFFLAGS: Unknown error 19
SIOCGIFFLAGS: Unknown error 19
SIOCGIFFLAGS: Unknown error 19
Error while Setting SERVICESETError while Setting SERVICESETError while Setting
SERVICESET invalid rate , choosing auto mode
statusset or get BSS enabled status: up/down.
statusset or get BSS enabled status: up/down.
statusset or get BSS enabled status: up/down.
WIRELESS is on
SIOCGIFFLAGS: Unknown error 19
SIOCGIFFLAGS: Unknown error 19
SIOCGIFFLAGS: Unknown error 19
file open failed, trying default file.
Let's go boy... :p
[*] Get ethernetflags....
[*] Eth header is ready....
[*] Arp header is ready....
Let's go boy... :p
[*] Get ethernetflags....
[*] Eth header is ready....
[*] Arp header is ready....
FILE: mid.c, LINE: 675
nowI don't initmidcom
FILE: mid.c, LINE: 865
midCreateInformPara fail
FILE: mid.c, LINE: 981
midCreateRegister fai
FILE: mid.c, LINE: 1099
register to midcomsystem server fail
FILE: mid.c, LINE: 478
should not be here!
device eth0 is not a slave of br0
V100R001 DHCP Client V1.01
paed: w wpanone_inNo IV counter file available, starting from zero
Got interface ifname wl0
string = setoid wl0 10000002ssid ChinaNet-i5qQ
RSSID :ssid set done ChinaNet-i5qQ
WIRELESS is on
wpa_supplicant: applet not found
V100R001C01 DNS Server V1.10
mirrorcms.c line 468 func code ulLan!
mirrorcms.c line 128 func code acCmd echo "PN:00" > /proc/
quantum/drv_ctl!
===bUsbconf=1====!
temp=0==CfgFilePath=
DEVICE PIN: 26698397
wpa_supplicant: applet not found
没看到！(daku:
不是此芯片，开机久就不行
这个好像汕头市不能用