rg100e-aa改64mddr400内存
rg100e-aa改64mddr400内存,改完可以正常启动，就是不会刷DD-WRT固件，那边有教程软件分享下，谢谢原机内存
DDR400内存
工具
己换上内存
拆下内存合影 这是启动数据
Decompressing..........done
CFE version 1.0.37 for BCM947XX (32bit,SP,LE)
Build Date: Thu May 15 15:08:01 CST 2008 (root@localhost.localdomain)
Copyright (C) 2000,2001,2002,2003 Broadcom Corporation.
Initializing Arena
Initializing Devices.
et0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 4.150.19.0
CPU type 0x29029: 240MHz
Total memory: 32768 KBytes
Total memory used by CFE:0x80700000 - 0x80798230 (623152)
Initialized Data: 0x8072F250 - 0x807319B0 (10080)
BSS Area: 0x807319B0 - 0x80732230 (2176)
Local Heap: 0x80732230 - 0x80796230 (409600)
Stack Area: 0x80796230 - 0x80798230 (8192)
Text (code) segment: 0x80700000 - 0x8072F250 (193104)
Boot area (physical): 0x00799000 - 0x007D9000
Relocation Factor: I:00000000 - D:00000000
Device eth0:hwaddr 00-1F-A3-4C-55-C1, ipaddr 192.168.1.1, mask 255.255.255.0
gateway not set, nameserver not set
Max TRX Image Supported: 0xFA0000
Loader:raw Filesys:tftp Dev:eth0 File:: Options:(null)
Loading: Failed.
Could not load :: Timeout occured
Loader:raw Filesys:raw Dev:flash0.os File: Options:(null)
Loading: ... 2699398 bytes read
Entry at 0x80001000
Closing network.
Starting program at 0x80001000
Linux version 2.6.8.1 (root@localhost.localdomain) (gcc version 3.4.2) #1 Fri De
c 12 21:17:15 CST 2008
Spansion S29GL128N 8Mx16, id 0x2101, size 16384KB, 128 sectors @0xbc000000
95354GR prom init
CPU revision is: 00029029
Setting the PFC to its default value
Determined physical RAM map:
memory: 02000000 @ 00000000 (usable)
On node 0 totalpages: 8192
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 4096 pages, LIFO batch:1
HighMem zone: 0 pages, LIFO batch:1
Built 1 zonelists
Kernel command line: root=31:2 ro noinitrd console=ttyS0,115200
Primary instruction cache 16kB, physically tagged, 4-way, linesize 16 bytes.
Primary data cache 16kB 2-way, linesize 16 bytes.
PID hash table entries: 256 (order 8: 2048 bytes)
CPU: BCM5354 rev 3 at 240 MHz
Using 120.000 MHz high precision timer.
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 29564k/32768k available (2017k kernel code, 3160k reserved, 538k data, 8
0k init, 0k highmem)
Calibrating delay loop... 236.74 BogoMIPS
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Checking for 'wait' instruction...unavailable.
NET: Registered protocol family 16
Computing partition layout for flash of size sectors
Partition ROOTFS_KRN Blks[ 90: 1 ..90]
SubPartition Image 1 Blks[ 45: 1 ..45]
SubPartition Image 2 Blks[ 45:46 ..90]
Blk# BlkOff Blks BlkSize AvailSize MemStart MemLen Partition Name
0 0 1131072 131072 0xbc000000 131072 BOOTLOADER
1 0 9013107211796480 0xbc020000 11796480 ROOTFS_KRN
91 0 32131072 4194304 0xbcb60000 4194304 JFFS_AUXFS
123 0 1131072 131072 0xbcf60000 131072 LOG_SCRPAD
124 0 1131072 131072 0xbcf80000 131072 PERSISTMEM_BAK
125 0 1131072 131072 0xbcfa0000 131072 PERSISTMEM
12665536 1131072 131072 0xbcfd0000 65536 NVRAM_BAK
12765536 1131072 131072 0xbcff0000 65536 NVRAM_BLK
Can't analyze prologue code at 801f76e0
PCI: no core
PCI: Fixing up bus 0
SCSI subsystem initialized
usbcore: registered new driver hub
JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc.
Initializing Cryptographic API
Serial: 8250/16550 driver $Revision: 1.90 $ 1 ports, IRQ sharing disabled
ttyS0 at MMIO 0x0 (irq = 3) is a 16550A
PPP generic driver version 2.4.2
NET: Registered protocol family 24
Using noop io scheduler
Physically mapped flash: Found 1 x16 devices at 0x0 in 16-bit bank
Physically mapped flash: Found an alias at 0x1000000 for the chip at 0x0
Amd/Fujitsu Extended Query Table at 0x0040
Physically mapped flash: CFI does not contain boot bank location. Assuming top.
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
Flash device: 0x1000000 at 0x1c000000
Physically mapped flash: squashfs filesystem found at block 1328
Creating 9 MTD partitions on "Physically mapped flash":
0x00000000-0x00020000 : "boot"
0x00020000-0x00b60000 : "linux"
0x0014c044-0x00b60000 : "rootfs"
0x00b60000-0x00f60000 : "auxfs"
0x00f60000-0x00f80000 : "log"
0x00f80000-0x00fa0000 : "psi_bak"
0x00fa0000-0x00fc0000 : "psi"
0x00fc0000-0x00fe0000 : "nvram_bak"
0x00fe0000-0x01000000 : "nvram"
USB20H fcr: 0x64
USB20H shim cr: 0x8f7
USB20H syn01 register : 0xfe00fe
USB20H syn03 register : 0x1
ehci_hcd 0000:00:03.1: EHCI Host Controller
ehci_hcd 0000:00:03.1: illegal capability!
ehci_hcd 0000:00:03.1: irq 6, pci mem b8003800
ehci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:03.1: USB 0.0 enabled, EHCI 1.00, driver 2004-May-10
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ohci_hcd: block sizes: ed 64 td 64
USB20H fcr: 0x64
USB20H shim cr: 0x8f7
USB20H syn01 register : 0xfe00fe
USB20H syn03 register : 0x1
ohci_hcd 0000:00:03.0: OHCI Host Controller
ohci_hcd 0000:00:03.0: irq 6, pci mem b8003000
ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
brcmboard: brcm_board_init entry
SES: LED GPIO 0x5 is enabled
nvram character device registered: major 254
u32 classifier
NET: Registered protocol family 2
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 15
Ebtables v2.0 registered
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (squashfs filesystem) readonly.
Freeing unused kernel memory: 80k freed
init started:BusyBox v1.00 (2008.12.12-13:21+0000) multi-call binary
Algorithmics/MIPS FPU Emulator v1.5
BusyBox v1.00 (2008.12.12-13:21+0000) Built-in shell (msh)
Enter 'help' for a list of built-in commands.
Loading drivers and kernel modules...
fuse init (API version 7.8)
fuse distribution version: 2.7.3
bcmprocfs: module license 'Proprietary' taints kernel.
Broadcom BCMPROCFS v1.0 initialized
eth0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 4.150.19.0
wl0: Broadcom BCM4318 802.11 Wireless Controller 4.150.19.0
usbback enable:0
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (256 buckets, 0 max) - 376 bytes per conntrack
ip_conntrack_pptp version 2.1 loaded
ip_nat_pptp version 2.0 loaded
ip_ct_h323: init success
ip_nat_h323: init success
ip_conntrack_rtsp v0.01 loading
ip_nat_rtsp v0.01 loading
insmod: cannot open module `/lib/modules/2.6.8.1/kernel/net/ipv4/netfilter/broad
com/nat_cache.ko': No such file or directory
ip_url_filter_ops: load success
ipt_time loading
ip_conntrack_devicectl: load success
ip_nat_irc: Unknown symbol needs_ip_conntrack_irc
insmod: cannot insert `/lib/modules/2.6.8.1/kernel/net/ipv4/netfilter/ip_nat_irc
.ko': Success (2): Success
ip_syslog_out_ops: load success
##################
ip_url_filter_ops: load success
==> Bcm963xx Software Version: RG100E_V1.0 <==
******************Original MAC address!!************
psi_mac: 00:1F:A3:4C:55:C1
nvram_mac: 00:1F:A3:4C:55:C1
wirless_mac: 00:1F:A3:4C:55:C2
tempDefaultMac : 00:90:4C:C0:04:51
******************After change MAC address!!************
psi_mac: 00:1F:A3:4C:55:C1
nvram_mac: 00:1F:A3:4C:55:C1
wirless_mac: 00:1F:A3:4C:55:C2
tempDefaultMac : 00:90:4C:C0:04:51
*************************End***************************
device eth0 entered promiscuous mode
uname: not found
buffer=2.6.8.1
ip_conntrack_devicectl: unload
ip_conntrack_devicectl: unload success
ip_conntrack_devicectl: load success
Setting SSID "ChinaNet-Z4jH"
SIOCGIFFLAGS: No such device
SIOCGIFFLAGS: No such device
SIOCGIFFLAGS: No such device
SIOCSIFHWADDR: No such device
wlctl: wl driver adapter not found
SIOCSIFHWADDR: No such device
wlctl: wl driver adapter not found
SIOCSIFHWADDR: No such device
wlctl: wl driver adapter not found
Setting country code using abbreviation: "ALL"
wlctl: Not Found
wlctl: Not Found
wlctl: Not Found
wlctl: Unsupported
device wds0.1 entered promiscuous mode
channel 6 selected
wl0: current channel 6
device wl0 entered promiscuous mode
WlMngr::startWsc: client-pbc mode
*********************************************
Wi-Fi Simple Config Application - Intel Corp.
Version: Build 1.0.5, November 19 2006
*********************************************
Initializing stack...button monitor start...!
OK
Now starting stack
wl0: Invalid argument
wl0: Invalid argument
******* MODE: AP with built-in Registrar and UPnP Proxy *******
WSC: Build-in Regstrar, wait for start command....
eth0: VLAN Enabled
ebtables -A INPUT -i eth1.2 -j mark --set-rmark 1 --mark-target CONTINUE 2> /var
/addprt
ebtables -A INPUT -i wl0 -j mark --set-rmark 5 --mark-target CONTINUE 2> /var/ad
dprt
interface eth0 does not exist!
BcmIPoWan_init: DHCP client enabled
BcmNtwk_initAlg 0 1 1 1 1
eth1.2: MAC Address: 00:1F:A3:4C:55:C1
eth1.3: MAC Address: 00:1F:A3:4C:55:C1
eth1.4: MAC Address: 00:1F:A3:4C:55:C1
eth1.5: MAC Address: 00:1F:A3:4C:55:C1
device eth0 left promiscuous mode
device wl0 left promiscuous mode
device wl0 entered promiscuous mode
device eth1.2 entered promiscuous mode
device eth1.3 entered promiscuous mode
device eth1.4 entered promiscuous mode
device eth1.5 entered promiscuous mode
device wl0.1 entered promiscuous mode
device wl0.2 entered promiscuous mode
device wl0.3 entered promiscuous mode
ipt_time unloaded
sntp: host not fip_url_filter_ops: unload success
ound
ip_url_filter_ops: unload success
rmmod ip_conntrack_httpfilter
rmmod ip_conntrack_httpfilter
iptables: Chain already exists
uname: not found
ip_syslog_out_ops: unload
ip_syslog_out_ops: unload success
ip_syslog_out_ops: load success
####die ddddddd
####die mmmmmmmmm
SIOCSIFADDR: No such device
SIOCSIFNETMASK: No such device
SIOCSIFBRDADDR: No such device
udp_send finished
batch updata timeout.
algname: h323 enable
algname: rtsp enable
insmod: cannot open module `/lib/modules/2.6.8.1/kernel/net/ipv4/netfilter/ip_co
nntrack_l2tp.ko': No such file or directory
reset_btn_gpio = 7
insmod: cannot open module `/lib/modules/2.6.8.1/kernel/net/ipv4/netfilter/ip_na
t_l2tp.ko': No such file or directory
algname: l2tp enable
algname: ipsec enable 没有猫功能的rg100a，多了个wan口，少了个jtag接口 其实我进来是想问，请问知道广州哪里可以提供改内存的服务。 刷dd和番茄后wan口灯不亮，无法使用。 其实我进来是想问，请问知道广州哪里可以提供改内存的服务。
vincentho 发表于 2009-10-15 17:33 https://www.chinadsl.net/images/common/back.gif
天河修主板的都可以改，太远的话找附近修手机的也可以。一般收10元，超过只能怪你人品好 本帖最后由 yy5409 于 2009-10-15 20:10 编辑
看焊接好像还不错。这里有DD下载，可以web或tftp刷，不过，记得先备份原来的固件啊！！！
http://www.dd-wrt.com/dd-wrtv2/d ... V24_TNG%2Fsvn13000/
改了64MB为啥还只是显示32MB?要命令激活？
Total memory: 32768 KBytes 没改彻底啊，还是32m=M 只用了一把烙铁？
焊工了得啊。。。 只用了一把烙铁？
焊工了得啊。。。
phantom-gy 发表于 2009-10-15 21:16 https://www.chinadsl.net/images/common/back.gif
就是一把烙铁和聂子，不用怀疑
以前在工厂是搞维修是焊接，只是对软件不熟