阿尔卡特500 s6307mpw-II按论坛教程升级不成功~
阿尔卡特500 s6307mpw-II电信屏蔽了pppoe的版本
按照论坛教程刷新后还是老样子
刷新时一切正常
刷新后版本号还是老的
不知道哪里出错了
请DX发一个自己刷过的程序给我再试试 https://www.chinadsl.net/viewthread.php?tid=21825&highlight=%C9%CF%BA%A3%B1%B4%B6%FB500
按照清水飘萍 xd的教程弄的~~ 路过，帮顶了。 1、运行里面CMD
2、telnet 192.168.1.1(这是我的猫的IP)
3、cmcli（#是提示符）
下面每行有:)的是需要输入的命令
# cmcli :)
DSL Modem CLI
Copyright (c) 2004 Texas Instruments, Inc.
cli> enable :)
Password: ********* (需要再次输入以root身份telnet时的密码)
New priv level = 5
cli# wan :)
cli(wan)# connection 1 :)
cli(wan connection1)# connection type pppoe :)
cli(wan connection1)# connection name pppoe-8_35 :)
cli(wan connection1)# atm pvc 8 35 :) （这里的pvc值各个地方不一样， 这里是深圳的，可以从网上查到）
cli(wan connection1)# ppp authentication username 输入你的adsl用户名（如:xxx@163.gd) :)
cli(wan connection1)# ppp authentication password adsl密码 :)
cli(wan connection1)# apply :)
cli(wan connection1)# show :) (下面是设置完成后的详细信息，可作参考)
connection type : pppoe
connection name: : pppoe_8_35
NAT : Enabled
Firewall : Enabled
IGMP Proxy : Disabled
UPnP : Disabled
VLan : Disabled
UnnumLan Group : lan0
PVC:
vpi : 8
vci : 35
QOS class : UBR
Static DNS entries:
nameserver 1 : 202.96.128.86
nameserver 2 : 202.96.134.133
nameserver 3 :
PPP connection settings:
Authentication : Auto
Username : 你的用户名@163.gd
Connection Mode : keep-alive
keep-alive time : 10
Enforce MTU : Disabled
MTU size : 1492
Set Default Route : Enabled
Debug Mode : Disabled
Static Route List
Connection Dest IP Mask Gateway Metric
-------------------------------------------------------------------------
IP QoS Configuration
Low Priority :
Medium Priority :
IP QoS State : Disabled
Trusted Mode : Disabled
Voice Configuration
Voice State : Disabled
cli(wan connection1)# save :) (最后你需要保存设置信息)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
cmcli 命令的帮助信息格式： <cmcli命令> + ?
如：
cli(wan connection1)# ppp ？
authentication Specify the PPP Authentication parameters
con_stat Set PPP Connection Status
connection-modeSet the on-demand or keep-alive connection mode
debug Choose the debug mode for PPP
default-route Select whether PPP sets the default route
enforce-mtu Set MTU enforcement for PPP
mtu Set MTU size for PPP
ppp_unnum Set PPP Unnumbered for PPP
pppun_lan Set LAN Group ID
cli(wan connection1)# connection ？
nameset the user friendly name for this connection
typeSet the connection type
cli# ?
advanced Modify settings in the advanced menu
ap Modify settings in the access point menu
apply Apply the current changes to the running system. Does not save
the settings to flash
disable Set privilege level to zero
discard Discards any pending changes to the system
enable Change privilege level
exit Quit the CLI
help CLI usage help
lan Modify settings in the Lan menu
log Set Log Level
logoff Quit the CLI
product-infoProduct information
quit Quit the CLI
reboot Reboots the system.
save Saves any applied changes to flash.
shell Go to the system shell
show Show current information
stats List modem stats
system Modify settings in the system menu
voice-nmm Enter the voice NMM command shell
wan Modify settings in the Wan menu
--MORE--
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
先把和你本地pppoe相同的桥接pvc连接删除了才能建立pppoe连接 https://www.chinadsl.net/viewthread.php?tid=21418&extra=&highlight=500-S6307MPW-II&page=2
多谢甲胄兄~~~ “用cd var进入var目录后，upgrade -f gaw7.img就能成功”
我试试 的确，关键在于要进var目录进行upgrade命令。
用cd var进入var目录后，upgrade -f gaw7.img就能成功。
感谢以上提供经验的兄弟们~~
特别感谢的是阳光和甲胄兄弟~ 用cd var进入var目录后
ls查看gaw7.img文件是否传入
TFTP Server.exe
然后进入 工具---管理员设置 开启路由
再去配置pppoe拨号
记得要先删掉本地桥接vpi vci设置
页:
[1]