db120 刷了公版 3.1死了为什么会这样 求救
本帖最后由 xiaodongdong 于 2009-8-17 19:27 编辑Total memory used by CFE:0x80401000 - 0x80528200 (1208832)
Initialized Data: 0x8041DA80 - 0x8041FA20 (8096)
BSS Area: 0x8041FA20 - 0x80426200 (26592)
Local Heap: 0x80426200 - 0x80526200 (1048576)
Stack Area: 0x80526200 - 0x80528200 (8192)
Text (code) segment: 0x80401000 - 0x8041DA80 (117376)
Boot area (physical): 0x00529000 - 0x00569000
Relocation Factor: I:00000000 - D:00000000
** Flash image not found. **
Board IP address : 192.168.1.1:ffffff00
Host IP address : 192.168.1.100
Gateway IP address :
Run from flash/host (f/h) : f
Default host run file name : vmlinux
Default host flash file name : bcm963xx_fs_kernel
Boot delay (0-9 seconds) : 1
Board Id (0-8) : 96358VW2
Number of MAC Addresses (1-32) : 11
Base MAC Address : 00:10:18:00:00:00
PSI Size (1-64) KBytes : 24
Flash Block Size (1-128) in KBytes: 64
Auxillary File System Size Percent: 0
Main Thread Number : 0
web info: Waiting for connection on socket 0.
CFE> flashimage 192.168.1.100:kernel.bin
Loading 192.168.1.100:kernel.bin ...
Loading failed.: CFE error -21
*** command status = -21
CFE> Board Id (0-8) : 96358VW2
Number of MAC Addresses (1-32) : 12
Base MAC Address : 00:10:18:00:00:00
PSI Size (1-64) KBytes : 24
Flash Block Size (1-128) in KBytes: 128
Auxillary File System Size Percent: 0
Main Thread Number : 0 怎么办啊 楼上 啥意思~~~~~~~~~~~555555555555555555
那些发固件的 太。。。不能用的固件也~发 本帖最后由 jcg88 于 2009-8-17 12:30 编辑
CFE>E N,清除NVRAM中的信息 输入“e n”，回车按提示输入y 回车清nvram
输入 i 回车 按提示输入y 回车清除配置文件
完成了上述修改和清除操作后，输入 r 回车 系统就会启动 没有用处 清楚了很多次。~！！ 这个论坛的高手发帖子都图省事，最要命的是后面有问题也基本很少回复很少补充。可怜了我们新手 jtag救回来了~~~~~~~~~~ db120也有jtag？ 楼主说的应该是TTL吧？
页:
[1]
2