gzwyx 发表于 2008-12-21 14:15:43

[TI芯片]请教如何用ttl线刷新Speedstream 5100 ADSL Modem

猫的型号是Speedstream 5100 ADSL Modem(060-E142-A01)

目前使用是原版本固件,由于原固件功能很差,而且不能telnet,也无FTP或TFTP功能,所以,只能考虑用ttl线刷了.但连接已经成功后,无法输入命令,请教哪位可以帮帮忙.下面是超级终端上显示的连接信息:

UTTON: Pressed            
Defaults button pressed. Restoring default configuration.                                                         
Getting Defaults               
done: rebooting modem.                     
UPNP: Sending ssdp:byebye notifications ...                                          

Reset Status Register (RSR) value: 0x1                                    

RAM size is 8388608 (0x800000).                              
Interrupt Stack Control @ 0x0.                              
Userland stack @ 0x947fffd8.                           
CPU clock rate is 150 MHz.                        
System clock rate is 125 MHz.                           
Bootloader compiled Nov 26 2003 at 08:43:09.                                          
Loader starting...                  
FLASH: STMicro M29W160B (Bottom Boot)                                    
autoboot v2.0            
LDR: Image @ 0xb0020000 - Valid                              
LDR: Beginning Uncompre                     
LDR: Compressed length = 673840                              
LDR: Uncompressed to = 2454332                              





   P R O J E C T                  
   XXX       XXX                  
      XXX   XXX               
       XXX   XXX               
      XXX XXX               
         XXXXX            
          XXX            
         XXXXX            
      XXX XXX               
       XXX   XXX               
      XXX   XXX               
   XXX       XXX - MIPS                        
Copyright (c) 2001-2002, Efficient Networks, Inc.                                                
Speedstream E142 is powered by Project X                                       
Version 004-E142-A2B, Build 75-SBC-53, Sep 15 2005 14:21:34                                                         
Expat - XML Parser Toolkit v1.2                              
      Copyright (c) 1998-2000, Thai Open Source Software                                                         
---System Starting---                     
XSH:                                                                                                                  
FLASH: STMicro M29W160B (Bottom Boot)                                    
UNIQUE ID: 000b2363f25b                     
NVRAM: 003-9015-INT, SBC Modem Configuration. NV'G':94072                                                         
NVRAM:                                                                                                                
INT:                                                                                                                  
TMR:                                                                                                                  
WDT: Internal timeout set to 30s                              
WDT:                                                                                                                  
LED:                                                                                                                  
BUTTON:                                                                                                               
SYSTASK:                                                                                                            
PASSWORD AUTOGEN: User lanadmin password set to 2263644523                                                         
XLOG: Persistent Log Disabled.                              
SNTPC:                                                                
SYSLOG:                                                
XLOG:                                                
IPFW:                                                
ADSL:                                                
BRG:                                                   
ETH1:                                                
2684:                                                
2364:                                                
ATM:                                                   
L2XP                                                   
UPNP:                                                
DNSRELAY:                                             
LANCLIENT:                                             
DDNSD:                                                
FWUPDATE:                                             
QOS:                                                   
ARDD:                                                
---System Ready---
ADSL: DataPump Version - 01.01.00.00
ADSL: DOWN
ADSL: WAITING
UPNP: Added IF: br0 to UPnP multi-cast group

gzwyx 发表于 2008-12-21 14:20:00

试过长时间按复位键,无效
试过连续多次不停按复位银,也无效

gzwyx 发表于 2008-12-21 16:17:47

本帖最后由 gzwyx 于 2008-12-21 08:24 编辑

https://www.chinadsl.net/home/attachment/200812/21/20605_1229847145SzOO.jpg
图中左下角的5个圆孔,就是连接ttl线的,经过多少失败尝试,正确连接方法如下:
左边第一个方形孔为1
1       2      3      4         5
      RXD            GND      TXD

flashcat 发表于 2008-12-21 20:02:32

AR7芯片的TTL一般用于修改bootloader参数,没有升级功能。
虽然硬件架构和公版类似,但Speedstream系列固件由西门子(Efficient)自行开发,不能与公版固件混刷。
如果熟悉JTAG,或许可以把这个鸡肋5100B刷成4200或者公版固件。

gzwyx 发表于 2008-12-22 22:03:42

本帖最后由 gzwyx 于 2008-12-22 14:50 编辑

谢谢楼上的,jtag不会用,而且没有4200的固件
找到个网站,还正在看
http://www.beyondlogic.org/nb5/
http://www.linux-mips.org/wiki/AR7

MINE 发表于 2008-12-25 14:28:32

无法输入命令可能是GND或TX没接好,你仔细检查确认一下。

AR7系列的芯片可以参考这个帖子
http://www.beyondlogic.org/nb5/ADAM2_ftp.htm

hotqj 发表于 2008-12-28 15:04:17

看的出来用的是专用系统。但TTL终端也应该能输入的啊,是不是你的TTL数据线的一条发送信号 线接错了。

如果终端都无法输入的话,那就比较麻烦了,还没有WEB界面。。。不过感觉这个Flash应该会存在WEB界面的啊。。。多试试几种IP。还有,AR7的JTAG我在W300上测试备份数据成功,但我没写过,你的接口,我看了下,感觉那个十孔的J3到是有可能是JTAG接口,至于软件我有过了,针对AR7的。LZ可以加我的QQ聊5378077,这方面资料我还没整理呢。

gzwyx 发表于 2008-12-28 19:17:52

谢谢先,刚出差四天回来,才看到,找时间我再试试

gzwyx 发表于 2008-12-28 20:08:46

本帖最后由 gzwyx 于 2008-12-28 12:09 编辑

看的出来用的是专用系统。但TTL终端也应该能输入的啊,是不是你的TTL数据线的一条发送信号 线接错了。

如果终端都无法输入的话,那就比较麻烦了,还没有WEB界面。。。不过感觉这个Flash应该会存在WEB界面的啊。。 ...
hotqj 发表于 2008-12-28 07:04 https://www.chinadsl.net/images/common/back.gif

web界面有,地址是192.168.0.1,但web界面的功能非常简单,没有upnp设置,也没有端口映射,web界面主要菜单如下:
Loginhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifConnection Informationhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifCheck Connectionhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifAdvancedhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifConnection Configurationhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifPPP Locationhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifUpdate Modemhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifReset Modemhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifStatisticshttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifRemote Accesshttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifChange Modem Access Codehttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifLoghttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifTechnician Readouthttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifhttp://192.168.0.1/trans1.gifLogin
You are currently connected to the Internet.

gzwyx 发表于 2008-12-28 20:12:53

无法输入命令可能是GND或TX没接好,你仔细检查确认一下。

AR7系列的芯片可以参考这个帖子
http://www.beyondlogic.org/nb5/ADAM2_ftp.htm
MINE 发表于 2008-12-25 06:28 https://www.chinadsl.net/images/common/back.gif

谢谢,可惜我的猫不支持FTP,也不支持telnet
页: [1] 2
查看完整版本: [TI芯片]请教如何用ttl线刷新Speedstream 5100 ADSL Modem