rg100a变砖修复，请教
打开100a就不断重启，连TTL线读出一下数据，请问下一步怎样修复？CFE version 1.0.37-11.3 for BCM96358 (32bit,SP,BE)
Build Date: 涓? 5鏈?28 22:37:40 CST 2008 (root@fc6.ayecom.com)
Copyright (C) 2000-2006 Broadcom Corporation.
Boot Address 0xbe000000
Initializing Arena.
Initializing Devices.
Parallel flash device: name AM29LV320MT, id 0x2201, size 16384KB
CPU type 0x2A010: 300MHz, Bus: 133MHz, Ref: 64MHz
CPU running TP0
Total memory: 33554432 bytes (32MB)
Total memory used by CFE:0x80401000 - 0x805284A0 (1209504)
Initialized Data: 0x8041D840 - 0x8041FCC0 (9344)
BSS Area: 0x8041FCC0 - 0x804264A0 (26592)
Local Heap: 0x804264A0 - 0x805264A0 (1048576)
Stack Area: 0x805264A0 - 0x805284A0 (8192)
Text (code) segment: 0x80401000 - 0x8041D83C (116796)
Boot area (physical): 0x00529000 - 0x00569000
Relocation Factor: I:00000000 - D:00000000
Board IP address : 192.168.1.1:ffffff00
Host IP address : 192.168.1.100
Gateway IP address :
Run from flash/host (f/h) : f
Default host run file name : vmlinux
Default host flash file name : bcm963xx_fs_kernel
Boot delay (0-9 seconds) : 1
Boot image (0=latest, 1=previous) :
Board Id (0-15) : 96358GW
Number of MAC Addresses (1-32) : 11
Base MAC Address : 00:74:04:e4:15:8e
PSI Size (1-64) KBytes : 24
Main Thread Number : 0
*** Press any key to stop auto run (1 seconds) ***
Auto run second count down: 0
Booting from previous image (0xbe020000) ...
Code Address: 0x80010000, Entry Address: 0x80257018
Decompression OK!
Entry at 0x80257018
Closing network.
Starting program at 0x80257018
Linux version 2.6.8.1 (root@liangbingtong) (gcc version 3.4.2) #1 Thu Apr 24 17:
49:10 CST 2008
Parallel flash device: name AM29LV320MT|S29GL128-A, id 0x2201, size 16384KB
fInfo.flash_rootfs_available_length = 16252928
*** Board is not initialized properly ***
96358GW prom init
CPU revision is: 0002a010
Determined physical RAM map:
memory: 01fa0000 @ 00000000 (usable)
On node 0 totalpages: 8096
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 4000 pages, LIFO batch:1
HighMem zone: 0 pages, LIFO batch:1
Built 1 zonelists
Kernel command line: root=31:0 ro noinitrd console=ttyS0,115200
brcm mips: enabling icache and dcache...
Primary instruction cache 32kB, physically tagged, 2-way, linesize 16 bytes.
Primary data cache 16kB 2-way, linesize 16 bytes.
PID hash table entries: 128 (order 7: 1024 bytes)
Using 150.000 MHz high precision timer.
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 29428k/32384k available (1902k kernel code, 2912k reserved, 425k data, 7
6k init, 0k highmem)
Calibrating delay loop... 299.00 BogoMIPS
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Checking for 'wait' instruction...unavailable.
NET: Registered protocol family 16
Total Flash size: 16384K with 128 sectors
Computing partition layout for flash of size sectors
Flash not used for Auxillary File System
Partition ROOTFS_KRN Blks
SubPartition Image 1 Blks[ 62: 1 ..62]
SubPartition Image 2 Blks[ 62:63 .. 124]
Blk# BlkOff Blks BlkSize AvailSize MemStart MemLen Partition Name
0 1408 1131072 131072 0xbe000580 1024 BOOTLOADER
1 012413107216252928 0xbe020000 16252928 ROOTFS_KRN
125 0 0 0 0 0xbefa0000 0 JFFS_AUXFS
125 0 1131072 131072 0xbefa0000 131072 LOG_SCRPAD
126 106496 1131072 131072 0xbefda000 24576 TW_PERSISTMEM
127 106496 1131072 131072 0xbeffa000 24576 PERSISTMEM
Can't analyze prologue code at 801ea324
SCSI subsystem initialized
usbcore: registered new driver hub
Skipping PCI bus scan due to resource conflict
JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc.
Initializing Cryptographic API
PPP generic driver version 2.4.2
NET: Registered protocol family 24
Using noop io scheduler
bcm963xx_mtd driver v2.0
File system address: 0xbe020100
Registered device mtd dev Flash
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ohci_hcd: block sizes: ed 64 td 64
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
brcmboard: brcm_board_init entry
WIFI: Button Interrupt 0xffff is not enabled
Serial: BCM63XX driver $Revision: 3.00 $
ttyS0 at MMIO 0xfffe0100 (irq = 10) is a BCM63XX
ttyS1 at MMIO 0xfffe0120 (irq = 11) is a BCM63XX
u32 classifier
NET: Registered protocol family 2
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 15
Ebtables v2.0 registered
NET: Registered protocol family 8
NET: Registered protocol family 20
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (squashfs filesystem) readonly.
Freeing unused kernel memory: 76k freed
init started:BusyBox v1.00 (2008.04.24-10:00+0000) multi-call binary
^@Algorithmics/MIPS FPU Emulator v1.5
^@
BusyBox v1.00 (2008.04.24-10:00+0000) Built-in shell (msh)
Enter 'help' for a list of built-in commands.
Loading drivers and kernel modules...
atmapi: module license 'Proprietary' taints kernel.
adsl: adsl_init entry
blaadd: blaa_detect entry
Broadcom BCMPROCFS v1.0 initialized
BCM63xx_ENET board id not set
insmod: cannot insert `/lib/modules/2.6.8.1/extra/bcm_enet.ko': Success (19): Su
ccess
BcmCfg_recover, L341: Waiting Usb init complete
cfminit.c, L358: flgfoundusb:0
cfminit.c, L379: flgfounddisk:0
cfminit.c, L445: time:1 sec
##no usb device22
wlctl: wl driver adapter not found
wlctl: wl driver adapter not found
wlctl: wl driver adapter not found
wlctl: wl driver adapter not found
wlctl: wl driver adapter not found
wlctl: wl driver adapter not found
xmlEndPMapFltObj(calling cfm to get appName PMapCfg, objName pmapFlt
Error parsing XML configuration: error fatal_err.
wlctl: wl driver adapter not found
wlctl: wl driver adapter not found
wlctl: wl driver adapter not found
wlctl: wl driver adapter not found
xmlEndPMapFltObj(calling cfm to get appName PMapCfg, objName pmapFlt
==func:xmlEndFtpSrvObjNode==, objName:account1
==func:xmlEndFtpSrvObjNode==, objName:account2
==func:xmlEndFtpSrvObjNode==, objName:account3
==func:xmlEndFtpSrvObjNode==, objName:srvParams
Error parsing XML configuration: error fatal_err.
BcmAdsl_Initialize=0xC00B63F8, g_pFnNotifyCallback=0xC00CF3C4
AnnexCParam=0x7FFF7EB8 AnnexAParam=0x00000980 adsl2=0x00000000
pSdramPHY=0xA1FFFFF8, 0x35CB1 0xDEADBEEF
AdslCoreHwReset: AdslOemDataAddr = 0xA1FFBA64
AnnexCParam=0x7FFF7EB8 AnnexAParam=0x00000980 adsl2=0x00000000
dgasp: kerSysRegisterDyingGaspHandler: dsl0 registered
ATM proc init !!!
get qos queue policy type error
Enable = 1
enter QosPriorityQueueTbl::removeAllTCRules
==> Bcm963xx Software Version: RG100A_V1.1 <==
buffer=2.6.8.1
-----insmod=insmod /lib/modules/2.6.8.1/kernel/net/ipv4/netfilter/ip_conntrack_d
evicectl.ko ip_begin=3232235777 ip_end=3232236030mode=1 maxTotalNumber=4 maxCo
mputerNumber=1 maxStbNumber=0 maxCameraNumber=1 computerStatus=0 stbStatus=0 cam
eraStatus=0
can't get Addr: Cannot assign requested address
ip_conntrack_devicectl: load success
sntp: host not found
ip_syslog_out_ops: load success
SIOCSIFADDR: No such device
SIOCSIFNETMASK: No such device
SIOCSIFBRDADDR: No such device
SIOCSIFADDR: No such device
SIOCSIFNETMASK: No such device
SIOCSIFBRDADDR: No such device
mount: Mounting /dev/mtdblock1 on /usr/local/ct failed: Invalid argument
umount: forced umount of (null) failed!
flash_eraseall: /dev/mtd2: No such device
mount: Mounting /dev/mtdblock1 on /usr/local/ct failed: Invalid argument
cp: unable to open `/usr/local/ct/ 3.在CFE界面下输入命令e n y 确认来清nvram
****在做这个e n命令之前最好也用一下i命令。这个是用来清空一下配置文件的。当然如果在猫的使用过程中，出现问题的话，可以用这个命令来清空一下配置文件。
4.修改数据为重设borad ID 11和mac数量12 一路回车
5.直到猫重启完成刷机 楼主可以了吗？？ 还不行，都无法输入，奇怪了 原帖由 sxtghost 于 2008-11-1 22:24 发表 https://www.chinadsl.net/images/common/back.gif
还不行，都无法输入，奇怪了
数据线的接地没接好 要怎样接地呢？难道是板子问题？ 现在还是无法输入，怎样启动都是这个页面
Boot Address 0xbe000000
Initializing Arena.
Initializing Devices.
Parallel flash device: name AM29LV320MT|S29GL128-A, id 0x2201, size 16384KB
*** Board is not initialized properly ***
Press:<enter> to use current value
'-' to go previous parameter
'.' to clear the current value
'x' to exit this command
96358VW2 ------- 0
96358VW ------- 1
96358GWVG ------- 2
96358MV2G ------- 3
96358M ------- 4
96358B ------- 5
96358BGWE_OEM1 ------- 6
96359PONG ------- 7
96358SV ------- 8
Board Id (0-8) :96358GW 原帖由 sxtghost 于 2008-11-2 00:01 发表 https://www.chinadsl.net/images/common/back.gif
现在还是无法输入，怎样启动都是这个页面
Boot Address 0xbe000000
Initializing Arena.
Initializing Devices.
Parallel flash device: name AM29LV320MT|S29GL128-A, id 0x2201, size 16384KB
*** Board...
输入1回车
然后应该是输入mac的，输入12 回车
第三步是输入你的机器的mac码后回车
接着的都是默认回车 原帖由 sxtghost 于 2008-11-1 16:01 发表 https://www.chinadsl.net/images/common/back.gif
现在还是无法输入，怎样启动都是这个页面
Boot Address 0xbe000000
Initializing Arena.
Initializing Devices.
Parallel flash device: name AM29LV320MT|S29GL128-A, id 0x2201, size 16384KB
*** Board...
CFE正在等待输入信息 当然无法启动了
输入不了 说明你TTL线接错了 TXD RXD GND缺1不可VCC可以不用连 我接的应该是对的呀，我都怀疑是线或者是机器的的问题了，我系统都换过了，还是不行
页:
[1]
2