首页 › 『 ADSL技术交流区 』(历史记录) › HG522启动全过程

wyfme 发表于 2008-9-17 22:00:54

HG522启动全过程

Solos 461x PP boot v1.5
SDRAM size = 0x2000000
Processor clock speed 264.0MHz
--- Check Tag CRC success,System Type: DUAL.
Start up info: SLAVE_S.
ulFsOffset: ae0000ulFsLen: 3264512ulFsOffset: 11403264
Finding flashfs partition...done.
PPB: image.a_magic = 0xea000006
PPB: image.a_text = 0x000012a0
PPB: image.a_data = 0x000b6460
PPB: image.a_bss = 0x0016cb04
PPB: image.a_syms = 0x00000000
PPB: image.a_entry = 0x00030020
PPB: image.a_trsize = 0x00000000
PPB: image.a_drsize = 0x00000000

Image 'image' is a Linux kernel
Trying to load initrd...none found
Calling Configure_NVS_FromFile.

Flash size is 0x01000000. sdram size = 0x02000000.
LZMA 4.05
init started:BusyBox v1.00 (2008.03.11-04:44+0000) multi-call binary
RCS DONE
Loading Conexant BSP...
BASE MAC ADDRESS 00:22:33:44:55:66
Starting Conexant drivers
. msc16 loaded
.DSL MSC16 imem 4096, dmem 2048
DSL MSC16 version 1.3
Resetting PLL
Starting PLL
PLL successfully restarted
.msc16_load_file returned 0
sram_buffer : 0xffa01d60 addr : 0x70001d60
Passing command buffer 70001d60 to MSC16
.
Conexant drivers started
Loading Wireless ...
Reading True PDA ...
Creating Delt char device
Loading drivers and kernel modules...
122
Waiting for cli start!| enter the msg
-===enter the log
/TSP_DBGetPara ok ulPort = 23
-----------CLI_Init------------
ulRet=0 in CLI_Init
\
Cwmp initing...
bootok
Welcome Visiting HuaweiHome Gateway
Copyright by Huawei Technologies Co., Ltd.
Login:start main
WIRELESS is off
Resetting PLL
Starting PLL
PLL successfully restarted
FILE: mid.c, LINE: 416
      midcom:core program return, pid:176, continue...
FILE: mid.c, LINE: 435
      Enter into func:MidCom_MngTaskStart
FILE: mid.c, LINE: 1083
      Enter into func:Mid_ProcessTask
FILE: mid.c, LINE: 486
      Enter into func:Mid_Connect
FILE: mid.c, LINE: 972
      Enter into func:Mid_ModuleRegister
FILE: mid.c, LINE: 578
      Mid_CreateInformPara
port_no -1 not surported, br:br0, port:wl0.0
device wl0.0 is not a slave of br0
port_no -1 not surported, br:br0, port:wl0.1
interface wl0.1 does not exist!
port_no -1 not surported, br:br0, port:wl0.2
interface wl0.2 does not exist!
port_no -1 not surported, br:br0, port:wl0.3
interface wl0.3 does not exist!
SIOCGIFFLAGS: Unknown error 19
SIOCGIFFLAGS: Unknown error 19
SIOCGIFFLAGS: Unknown error 19
Error while Setting SERVICESETError while Setting SERVICESETError while Setting
SERVICESET invalid rate , choosing auto mode
setwmecnxt : Set WME (Wireless Multimedia Extensions) status
      (0=off, 1=on, -1=auto).
setwmestr
      cnxt : Set WME ACK strategy status(0 = ack , 1 = no ack, 2 = dynamic).
txpwr   set or display tx power in various units.
      -d dbm units
      -m milliwatt units
statusset or get BSS enabled status: up/down.
statusset or get BSS enabled status: up/down.
statusset or get BSS enabled status: up/down.

WIRELESS is on
SIOCGIFFLAGS: Unknown error 19
SIOCGIFFLAGS: Unknown error 19
SIOCGIFFLAGS: Unknown error 19
file open failed, trying default file.
Let's go boy... :p
[*] Get ethernetflags....
[*] Eth header is ready....
[*] Arp header is ready....
Let's go boy... :p
[*] Get ethernetflags....
[*] Eth header is ready....
[*] Arp header is ready....
device eth0 is not a slave of br0
Connction id is 4
acCmd : echo "L:vpi=0/vci=35/rfc1483=true/rfc1483.mode=Llcbridged/class=ubr/port
=a1" > /proc/quantum/drv_ctl
acCmd : echo "V:vpi=0:vci=35:conid=4" > /proc/quantum/drv_ctl
Call the function for bunif interface
Starting OAM test
Starting OAM test
FILE: mid.c, LINE: 833
      pucBuff isSWVER=&HWVER=&OUI=&SN=&VENDOR=HUAWEIlen is36

3d 02 00 00 08 66 69 72 6d 77 61 72 65 05 00 24
53 57 56 45 52 3d 26 48 57 56 45 52 3d 26 4f 55
49 3d 26 53 4e 3d 26 56 45 4e 44 4f 52 3d 48 55
41 57 45 49

3d 02 00 00 08 66 69 72 6d 77 61 72 65 05 00 24
53 57 56 45 52 3d 26 48 57 56 45 52 3d 26 4f 55
49 3d 26 53 4e 3d 26 56 45 4e 44 4f 52 3d 48 55
41 57 45 49
Check received data....,the datalen is 52
3d 02 00 00 08 66 69 72 6d 77 61 72 65 05 00 24 53 57 56 45 52 3d 26 48 57 56 45
52 3d 26 4f 55 49 3d 26 53 4e 3d 26 56 45 4e 44 4f 52 3d 48 55 41 57 45 49
the length is 50
the length is 39
the received data is ok!
<61><2><0><0><8>
DataMgt:Recevie FW reg information
The FW register OK.send PARA_FW_REGOK event
**Main:send 8 bytes data to firmware

3e 01 07 00 03 32 30 30 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
FILE: mid.c, LINE: 1102
      register to midcom system sucess
FILE: mid.c, LINE: 1107
      midcom init success !!!
paed: w 0-108Mnetlink_coPrivacy invoked is NOT set because open system enabl
ed
paed: w         wpanone_inNo IV counter file available, starting from zero
wpa_supplicant: applet not found
Got interface ifname wl0
WIRELESS is on
string = setoid wl0 10000002ssid 108M
RSSID :ssid set done 108M
DEVICE PIN: 15324610
===bUsbconf=0====!
paed: w 0-108Mnetlink_coPrivacy invoked is NOT set because open system enabl
ed
wpa_supplicant: applet not found
Login incorrect!
Login:
请求提供这里的用户名和密码谢谢！

YES东 发表于 2008-9-18 11:50:14

刚启动的时候直接按回车，你启动到最后设备都正常模式启动肯定是要账号密码

hotqj 发表于 2008-9-18 12:35:02

HG522无法进入Bootload模式的。
最后那里要密码的地方，就类似Telnet的界面。

用户名：!!Huawei
密码：@HuaweiHgw

注意大小写和符号。

encry 发表于 2008-9-19 18:50:31

打击骗子~~~~~~~~(hua:

tomac 发表于 2009-1-21 10:48:16

mcnet 发表于 2009-2-15 03:13:56

那个mtdblock3里全是配置，包括ssid，超级用户名，密码，连接数目等等，连login的密码都有的改

查看完整版本: HG522启动全过程