yuanxun9 发表于 2019-8-22 23:45:17

请大神帮我看下TTL信息，还有救没有！不停不能输入命令！

本帖最后由 yuanxun9 于 2019-8-23 00:19 编辑


请大神帮我看下TTL信息，还有救没有！不停不能输入命令！AllsytemA分区是刷坏的AllsytemB分区好好的，启动不起来！有个帖子说ttl 可以通过短接flash的方式来让猫找不到不到flash来中断ttl进入命令行刷机，请问8145V5那个需要短接那个芯片，请帮我圈出来麻烦大神了！！图如下！
Startcode 2017.07 (V500R019C00 Sep 29 2018 - 01:22:52 +0800 V5)

NAND:SPI_NAND_FLASH_TYPE
flash_type =
Nand ID: 0xEF 0xAA 0x21 0x00 0x00 0x00 0x00 0x00
ECC Match pagesize:2K, oobzie:64, ecctype:8bit
Nand(Hardware): startcode select the uboot to load
the high RAM is :8080103c
startcode uboot boot count:0
use the main slave_param area from flash, the RAM data is not OK!!!
Use the AllsytemA to load first
Start in Normal Mode
Error: Unknow head Type
Start from AllsytemA ERROR, Change to AllsytemB
Start in Normal Mode
ERROR:uboot magic 0x73717368
Both AllsytemA and AllsytemB are not OK, load it by JTAG!
Chip Type is SD5117P
safetycode boot type: spi nand flash
Safetycode build: (V500R019C00 Sep 29 2018 - 01:22:05)
Select startcodeA
startcode start at 0x1c020088


Startcode 2017.07 (V500R019C00 Sep 29 2018 - 01:22:52 +0800 V5)

NAND:SPI_NAND_FLASH_TYPE
flash_type =
Nand ID: 0xEF 0xAA 0x21 0x00 0x00 0x00 0x00 0x00
ECC Match pagesize:2K, oobzie:64, ecctype:8bit
Nand(Hardware): startcode select the uboot to load
the high RAM is :8080103c
startcode uboot boot count:0
use the main slave_param area from flash, the RAM data is not OK!!!
Use the AllsytemA to load first
Start in Normal Mode
Error: Unknow head Type
Start from AllsytemA ERROR, Change to AllsytemB
Start in Normal Mode
ERROR:uboot magic 0x73717368
Both AllsytemA and AllsytemB are not OK, load it by JTAG!
Chip Type is SD5117P
safetycode boot type: spi nand flash
Safetycode build: (V500R019C00 Sep 29 2018 - 01:22:05)
Select startcodeA
startcode start at 0x1c020088


Startcode 2017.07 (V500R019C00 Sep 29 2018 - 01:22:52 +0800 V5)

NAND:SPI_NAND_FLASH_TYPE
flash_type =
Nand ID: 0xEF 0xAA 0x21 0x00 0x00 0x00 0x00 0x00
ECC Match pagesize:2K, oobzie:64, ecctype:8bit
Nand(Hardware): startcode select the uboot to load
the high RAM is :8080103c
startcode uboot boot count:0
use the main slave_param area from flash, the RAM data is not OK!!!
Use the AllsytemA to load first
Start in Normal Mode
Error: Unknow head Type
Start from AllsytemA ERROR, Change to AllsytemB
Start in Normal Mode
ERROR:uboot magic 0x73717368
Both AllsytemA and AllsytemB are not OK, load it by JTAG!
Chip Type is SD5117P
safetycode boot type: spi nand flash
Safetycode build: (V500R019C00 Sep 29 2018 - 01:22:05)
Select startcodeA
startcode start at 0x1c020088


Startcode 2017.07 (V500R019C00 Sep 29 2018 - 01:22:52 +0800 V5)

NAND:SPI_NAND_FLASH_TYPE
flash_type =
Nand ID: 0xEF 0xAA 0x21 0x00 0x00 0x00 0x00 0x00
ECC Match pagesize:2K, oobzie:64, ecctype:8bit
Nand(Hardware): startcode select the uboot to load
the high RAM is :8080103c
startcode uboot boot count:0
use the main slave_param area from flash, the RAM data is not OK!!!
Use the AllsytemA to load first
Start in Normal Mode
Error: Unknow head Type
Start from AllsytemA ERROR, Change to AllsytemB
Start in Normal Mode
ERROR:uboot magic 0x73717368
Both AllsytemA and AllsytemB are not OK, load it by JTAG!
Chip Type is SD5117P
safetycode boot type: spi nand flash
Safetycode build: (V500R019C00 Sep 29 2018 - 01:22:05)
Select startcodeA
startcode start at 0x1c020088


Startcode 2017.07 (V500R019C00 Sep 29 2018 - 01:22:52 +0800 V5)

NAND:SPI_NAND_FLASH_TYPE
flash_type =
Nand ID: 0xEF 0xAA 0x21 0x00 0x00 0x00 0x00 0x00
ECC Match pagesize:2K, oobzie:64, ecctype:8bit
Nand(Hardware): startcode select the uboot to load
the high RAM is :8080103c
startcode uboot boot count:0
use the main slave_param area from flash, the RAM data is not OK!!!
Use the AllsytemA to load first
Start in Normal Mode
Error: Unknow head Type
Start from AllsytemA ERROR, Change to AllsytemB
Start in Normal Mode
ERROR:uboot magic 0x73717368
Both AllsytemA and AllsytemB are not OK, load it by JTAG!
Chip Type is SD5117P
safetycode boot type: spi nand flash
Safetycode build: (V500R019C00 Sep 29 2018 - 01:22:05)
Select startcodeA
startcode start at 0x1c020088


Startcode 2017.07 (V500R019C00 Sep 29 2018 - 01:22:52 +0800 V5)

NAND:SPI_NAND_FLASH_TYPE
flash_type =
Nand ID: 0xEF 0xAA 0x21 0x00 0x00 0x00 0x00 0x00
ECC Match pagesize:2K, oobzie:64, ecctype:8bit
Nand(Hardware): startcode select the uboot to load
the high RAM is :8080103c
startcode uboot boot count:0
use the main slave_param area from flash, the RAM data is not OK!!!
Use the AllsytemA to load first
Start in Normal Mode
Error: Unknow head Type
Start from AllsytemA ERROR, Change to AllsytemB
Start in Normal Mode
ERROR:uboot magic 0x73717368
Both AllsytemA and AllsytemB are not OK, load it by JTAG!
Chip Type is SD5117P
safetycode boot type: spi nand flash
Safetycode build: (V500R019C00 Sep 29 2018 - 01:22:05)
Select startcodeA
startcode start at 0x1c020088


Startcode 2017.07 (V500R019C00 Sep 29 2018 - 01:22:52 +0800 V5)

NAND:SPI_NAND_FLASH_TYPE
flash_type =
Nand ID: 0xEF 0xAA 0x21 0x00 0x00 0x00 0x00 0x00
ECC Match pagesize:2K, oobzie:64, ecctype:8bit
Nand(Hardware): startcode select the uboot to load
the high RAM is :8080103c
startcode uboot boot count:0
use the main slave_param area from flash, the RAM data is not OK!!!
Use the AllsytemA to load first
Start in Normal Mode
Error: Unknow head Type
Start from AllsytemA ERROR, Change to AllsytemB
Start in Normal Mode
ERROR:uboot magic 0x73717368
Both AllsytemA and AllsytemB are not OK, load it by JTAG!
Chip Type is SD5117P
safetycode boot type: spi nand flash
Safetycode build: (V500R019C00 Sep 29 2018 - 01:22:05)
Select startcodeA
startcode start at 0x1c020088


Startcode 2017.07 (V500R019C00 Sep 29 2018 - 01:22:52 +0800 V5)

NAND:SPI_NAND_FLASH_TYPE
flash_type =
Nand ID: 0xEF 0xAA 0x21 0x00 0x00 0x00 0x00 0x00
ECC Match pagesize:2K, oobzie:64, ecctype:8bit
Nand(Hardware): startcode select the uboot to load
the high RAM is :8080103c
startcode uboot boot count:0
use the main slave_param area from flash, the RAM data is not OK!!!
Use the AllsytemA to load first
Start in Normal Mode
Error: Unknow head Type
Start from AllsytemA ERROR, Change to AllsytemB
Start in Normal Mode
ERROR:uboot magic 0x73717368
Both AllsytemA and AllsytemB are not OK, load it by JTAG!
Chip Type is SD5117P
safetycode boot type: spi nand flash
Safetycode build: (V500R019C00 Sep 29 2018 - 01:22:05)
Select startcodeA
startcode start at 0x1c020088


Startcode 2017.07 (V500R019C00 Sep 29 2018 - 01:22:52 +0800 V5)

NAND:SPI_NAND_FLASH_TYPE
flash_type =
Nand ID: 0xEF 0xAA 0x21 0x00 0x00 0x00 0x00 0x00
ECC Match pagesize:2K, oobzie:64, ecctype:8bit
Nand(Hardware): startcode select the uboot to load
the high RAM is :8080103c
startcode uboot boot count:0
use the main slave_param area from flash, the RAM data is not OK!!!
Use the AllsytemA to load first
Start in Normal Mode
Error: Unknow head Type
Start from AllsytemA ERROR, Change to AllsytemB
Start in Normal Mode
ERROR:uboot magic 0x73717368
Both AllsytemA and AllsytemB are not OK, load it by JTAG!
Chip Type is SD5117P
safetycode boot type: spi nand flash
Safetycode build: (V500R019C00 Sep 29 2018 - 01:22:05)
Select startcodeA
startcode start at 0x1c020088


Startcode 2017.07 (V500R019C00 Sep 29 2018 - 01:22:52 +0800 V5)

NAND:SPI_NAND_FLASH_TYPE
flash_type =
Nand ID: 0xEF 0xAA 0x21 0x00 0x00 0x00 0x00 0x00
ECC Match pagesize:2K, oobzie:64, ecctype:8bit
Nand(Hardware): startcode select the uboot to load
the high RAM is :8080103c
startcode uboot boot count:0
use the main slave_param area from flash, the RAM data is not OK!!!
Use the AllsytemA to load first
Start in Normal Mode
Error: Unknow head Type
Start from AllsytemA ERROR, Change to AllsytemB
Start in Normal Mode
ERROR:uboot magic 0x73717368
Both AllsytemA and AllsytemB are not OK, load it by JTAG!
Chip Type is SD5117P
safetycode boot type: spi nand flash
Safetycode build: (V500R019C00 Sep 29 2018 - 01:22:05)
Select startcodeA
startcode start at 0x1c020088


Startcode 2017.07 (V500R019C00 Sep 29 2018 - 01:22:52 +0800 V5)

NAND:SPI_NAND_FLASH_TYPE
flash_type =
Nand ID: 0xEF 0xAA 0x21 0x00 0x00 0x00 0x00 0x00
ECC Match pagesize:2K, oobzie:64, ecctype:8bit
Nand(Hardware): startcode select the uboot to load
the high RAM is :8080103c
startcode uboot boot count:0
use the main slave_param area from flash, the RAM data is not OK!!!
Use the AllsytemA to load first
Start in Normal Mode
Error: Unknow head Type
Start from AllsytemA ERROR, Change to AllsytemB
Start in Normal Mode
ERROR:uboot magic 0x73717368
Both AllsytemA and AllsytemB are not OK, load it by JTAG!
Chip Type is SD5117P
safetycode boot type: spi nand flash
Safetycode build: (V500R019C00 Sep 29 2018 - 01:22:05)
Select startcodeA
startcode start at 0x1c020088

dty 发表于 2019-8-23 09:04:00

别想了，TTL无法救砖，华为早就改了。

fnto 发表于 2019-8-23 09:32:29

两个分区均坏。

笑看人生666 发表于 2019-8-23 15:42:49

load it by JTAG,和我的猫一样，需要用编程器了

tangjing9 发表于 2019-8-23 20:06:27

yuanxun9 发表于 2019-8-23 20:24:06

笑看人生666 发表于 2019-8-23 15:42
load it by JTAG,和我的猫一样，需要用编程器了

请问需要买那个芯片的编程器，谢谢了！！

liquan9564 发表于 2019-8-23 23:43:29

这个好专业看不懂

笑看人生666 发表于 2019-8-24 23:36:53

我的是SA1456C，还没搞，放在那呢，光猫多

霹雳 发表于 2019-8-25 05:50:07

本人代写存储器芯片
页: [1]
查看完整版本: 请大神帮我看下TTL信息，还有救没有！不停不能输入命令！