新手求教，为什么TTL putty不能输入字符？中兴F450
根据帖子教程，焊接了ttl，连了3根线，用的是ft232。每次跑到 udp 0 0 :::547 :::* 676/cspd这个地方就不怎么动了，键盘输入任何东西无反应
附
U-Boot 2013.04 (Nov 06 2017 - 17:53:35)
CPU: ZX279127@A9,800MHZ
Board: ZTE zx279127evb
I2C: ready
DRAM:256 MiB
com1
product_vid = 7
vid=7-F450
bootsel=3
NAND:manuid=ef,aa
Manu ID: 0xef, Chip ID: 0xaa (Winbond SPI NAND W25N01GVZEIR+WINBOND 128MiB 3,3V)
128 MiB
<nand_read_skip_bad_,1253>!mtdpart=0x1,offset=0x0,mtdpartoffset=0xc0000,mtdPartsize=0x40000,length=0x20000
In: serial
Out: serial
Err: serial
Net: addr 0x94000008 before value is f9ffffcf
addr 0x94000008 after value is ffffffcf
serdes init done
init phy first!
eth0
Hit 1 to upgrade software version
Hit any key to stop autoboot:0
addr=1d00000
addr=2f80000
select=0x0
search=0x2
<nand_read_skip_bad_,1253>!mtdpart=0x6,offset=0x0,mtdpartoffset=0x100000,mtdPartsize=0x80000,length=0x1000
tmp=0x00000000, value=0
select = 0x0
search->result.entry=1d00140
<nand_read_skip_bad_,1253>!mtdpart=0x2,offset=0x0,mtdpartoffset=0x1d00000,mtdPartsize=0x1280000,length=0xf6e500
<nand_read_skip_bad_,1253>!mtdpart=0x0,offset=0x0,mtdpartoffset=0x0,mtdPartsize=0xc0000,length=0x80000
lseek=0x42042040
cmdline=U-Boot V2.0.0T14 20171106180858
## Booting kernel from Legacy Image at 44000140 ...
Image Name: Linux Kernel Image
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 16180086 Bytes = 15.4 MiB
Load Address: 40008000
Entry Point:40008000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK
----------------------
|-->setup versioninfo tag...
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
ppBooting Linux on physical CPU 0x0
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.1.25 (root@A23176683) (gcc version 4.9.3 (Buildroot 2015.08.1-svn724) ) #6 Mon Nov 6 18:08:40 CST 2017
CPU: ARMv7 Processor revision 1 (ARMv7), cr=18c53c7d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine model: ZTE ZX279127
Forcing write-allocate cache policy for SMP
Forcing shared mappings for SMP
Memory policy: Data cache writealloc
======= zx_map_io =======
BUG: mapping for 0x00400000 at 0xf0000000 out of vmalloc space
BUG: mapping for 0x00800000 at 0xf0100000 out of vmalloc space
BUG: mapping for 0x00a20000 at 0xf0200000 out of vmalloc space
BUG: mapping for 0x00c00000 at 0xf0300000 out of vmalloc space
BUG: mapping for 0x94000000 at 0xf0400000 out of vmalloc space
BUG: mapping for 0x94100000 at 0xf0500000 out of vmalloc space
BUG: mapping for 0x94200000 at 0xf0600000 out of vmalloc space
BUG: mapping for 0x94400000 at 0xf0700000 out of vmalloc space
BUG: mapping for 0x9a100000 at 0xf0800000 out of vmalloc space
BUG: mapping for 0x00d00000 at 0xf0900000 out of vmalloc space
BUG: mapping for 0x92000000 at 0xf4000000 out of vmalloc space
BUG: mapping for 0x00200000 at 0xf0a00000 out of vmalloc space
BUG: mapping for 0x9fe00000 at 0xf0f00000 out of vmalloc space
BUG: mapping for 0x09100000 at 0xf0b00000 out of vmalloc space
BUG: mapping for 0x09400000 at 0xf0c00000 out of vmalloc space
BUG: mapping for 0x4eb00000 at 0xf1000000 out of vmalloc space
modename:bbx addr:4e900000 size:000f4000
bbx reserver memory:1318060032:999424
CPU: All CPU(s) started in SVC mode.
Built 1 zonelists in Zone order, mobility grouping on.Total pages: 64960
Kernel command line: console=ttyAMA0,115200n8 root=/dev/ram0 rw rdinit=/sbin/init mem=256M; U-Boot V2.0.0T14 20171106180858 0x1d00000 0x0 0x83 0x82
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 215512K/262144K available (5239K kernel code, 246K rwdata, 1904K rodata, 12212K init, 884K bss, 46632K reserved, 0K cma-reserved)
Virtual kernel memory layout:
vector: 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap: 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xd0800000 - 0xf0000000 ( 504 MB)
lowmem: 0xc0000000 - 0xd0000000 ( 256 MB)
modules : 0xbf000000 - 0xc0000000 (16 MB)
.text : 0xc0008000 - 0xc0702018 (7145 kB)
.init : 0xc0703000 - 0xc12f0000 (12212 kB)
.data : 0xc12f0000 - 0xc132d940 ( 247 kB)
.bss : 0xc132d940 - 0xc140ab54 ( 885 kB)
SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
NR_IRQS:16 nr_irqs:16 16
L2C: platform modifies aux control register: 0x02020000 -> 0x32420000
L2C: platform provided aux values permit register corruption.
L2C: DT/platform modifies aux control register: 0x02020000 -> 0x02420000
L2C-310 enabling early BRESP for Cortex-A9
L2C-310 full line of zeros enabled for Cortex-A9
L2C-310 dynamic clock gating enabled, standby mode enabled
L2C-310 cache controller enabled, 8 ways, 128 kB
L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x46420001
sched_clock: 64 bits at 400MHz, resolution 2ns, wraps every 4398046511103ns
clocksource arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x5c4093a7d1, max_idle_ns: 440795210635 ns
Calibrating delay loop... 1594.16 BogoMIPS (lpj=7970816)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
Initializing cgroup subsys blkio
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys pids
CPU: Testing write buffer coherency: ok
Setting up static identity map for 0x400081e0 - 0x40008238
devtmpfs: initialized
clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
e8_arp_detect_init OK!
DMA: preallocated 2048 KiB pool for atomic coherent allocations
11930:22:53 [(1093)LogStdioProcInit] LogStdioProcInit
LogUdpWatchProcInit
genirq: Setting trigger mode 8 for irq 24 failed (gic_set_type+0x0/0x4c)
genirq: Setting trigger mode 8 for irq 25 failed (gic_set_type+0x0/0x4c)
genirq: Setting trigger mode 8 for irq 26 failed (gic_set_type+0x0/0x4c)
product_vid = 7
current_board=c12fac10
bootsel=3
hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
Serial: AMBA PL011 UART driver
94405000.serial: ttyAMA0 at MMIO 0x94405000 (irq = 19, base_baud = 0) is a
console enabled
sysPhysRsvdMemGetaddr 4e900000 size 000f4000
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Switched to clocksource arm_global_timer
NET: Registered protocol family 2
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
synopsys pcie probe enter!!!!!!
pcie irq is 29
synopsys pcie0 controller setting
synopsys pcie0 controller waitting L0 state
pcie0 link up,gen1,cnt 3!
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource
pci_bus 0000:00: root bus resource
pci_bus 0000:00: No busn resource found for root bus, will use
PCI: bus0: Fast back to back transfers disabled
pci 0000:00:00.0: BAR 0: assigned
tdm registered!
zx_tdm2.0_probe version_20170119
g_tdm_buf =d0a05000,4bf46000
remap tdm reg 9a107000 to f0807000
tdm irq=28
reg 0xf0800028 value is 0x13
pon init
the pon mode is 20
pon clk reset pin mux
pp init
netif_napi_add() called with weight 512 on device pon
pp net init ok
switch init
idm_desc_init d0a15000/4bf70000
idm net init ok
futex hash table entries: 256 (order: -1, 3072 bytes)
squashfs: version 4.0 (2009/01/31) Phillip Lougher
ntfs: driver 2.1.32 .
jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
fuse init (API version 7.23)
alg: No test for stdrng (krng)
io scheduler noop registered (default)
SCSI Media Changer driver v0.25
nand bootsel======3
zte_spifc_reg:ce065580
spifc->io_base :f0707000
nand: device found, Manufacturer ID: 0xef, Chip ID: 0xaa
nand: WINBOND SPI NAND W25N01GV128MiB 3,3V
nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
NAND Chip: oobsize:0x40, pagesize:0x800, blocksize:0x20000, chipsize:0x8000000, ECC capbility is 8 bits, CRC protection is disabled
Scanning device for bad blocks
bitflip_threshold====1,ecc strength=====1
Creating 12 MTD partitions on "ZX279127-spifc":
0x000000000000-0x000008000000 : "whole flash"
0x000000000000-0x000000100000 : "u-boot"
0x000000100000-0x000000180000 : "others"
0x000000180000-0x000000280000 : "parameter tags"
0x000000280000-0x000000380000 : "wlan"
0x000000380000-0x000000580000 : "usercfg"
0x000000580000-0x000000d80000 : "framework"
offset=0,data=73717368
found, offset=0,data=73717368
skipoffset=0
0x000000d80000-0x000001580000 : "framework1"
offset=0,data=73717368
found, offset=0,data=73717368
skipoffset=0
0x000001580000-0x000001d00000 : "dbus"
0x000001d00000-0x000002f80000 : "kernel1"
0x000002f80000-0x000004200000 : "kernel2"
0x000004200000-0x000008000000 : "plugin_data"
ret:0
zx_spi_probe...master->bus_num:0
val:5327,chip_select:1
SPI0 probed
PPP generic driver version 2.4.2
PPP BSD Compression module registered
PPP Deflate Compression module registered
PPP MPPE Compression module registered
NET: Registered protocol family 24
PPTP driver version 0.8.5
dwc2 9000000.usb: 0 invalid for otg_cap parameter. Check HW configuration.
dwc2 9000000.usb: 1024 invalid for host_nperio_tx_fifo_size. Check HW configuration.
dwc2 9000000.usb: 1024 invalid for max_packet_count. Check HW configuration.
dwc2 9000000.usb: DWC OTG Controller
creating file 'devices'creating file '001'
dwc2 9000000.usb: new USB bus registered, assigned bus number 1
dwc2 9000000.usb: irq 30, io mem 0x00000000
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: DWC OTG Controller
usb usb1: Manufacturer: Linux 4.1.25 dwc2_hsotg
usb usb1: SerialNumber: 9000000.usb
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
creating file '001'
usbcore: registered new interface driver cdc_acm
cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
usbserial: USB Serial support registered for generic
usbcore: registered new interface driver ch341
usbserial: USB Serial support registered for ch341-uart
usbcore: registered new interface driver cp210x
usbserial: USB Serial support registered for cp210x
usbcore: registered new interface driver pl2303
usbserial: USB Serial support registered for pl2303
mousedev: PS/2 mouse device common for all mice
I2C probe start!I2C probe successed!<pdt_wdt_init>(589):creat proc files for watchdog!!!
<pdt_wdt_init>(593):Starting Watchdog Timer...
arm A9 regs f0100620 cpu0 watchdog: heartbeat 4 sec, clock 3125000,max heartbeat 1374
Synopsys Designware Multimedia Card Interface Driver
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (3367 buckets, 16256 max)
MAXNET DPI interface Loaded
gre: GRE over IPv4 demultiplexor driver
ip_tables: (C) 2000-2006 Netfilter Core Team
NET: Registered protocol family 10
ip6_tables: (C) 2000-2006 Netfilter Core Team
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
Bridge firewalling registered
Ebtables v2.0 registered
l2tp_core: L2TP core driver, V2.0
l2tp_ppp: PPPoL2TP kernel driver, V2.0
8021q: 802.1Q VLAN Support v1.8
systools version:v0.7.5
zte--oss cpu usage module init
iprt_data_init success!
e8_init OK!
DevBw module init
ppFreeing unused kernel memory: 12212K (c0703000 - c12f0000)
This architecture does not have kernel memory protection.
busyox init and ppset aff
jffs2: notice: (473) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
jffs2: notice: (475) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
jffs2: Empty flash at 0x000aa140 ends at 0x000aa800
jffs2: jffs2_scan_eraseblock(): Node at 0x000adffc {0x1985, 0xe001, 0xe0021985) has invalid CRC 0x00000044 (calculated 0x515918d5)
jffs2: notice: (518) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
ubi0: attaching mtd11
ubi0: scanning is finished
ubi0: attached mtd11 (name "plugin_data", size 62 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi0: good PEBs: 496, bad PEBs: 0, corrupted PEBs: 0
ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 1515820036
ubi0: available PEBs: 0, total reserved PEBs: 496, PEBs reserved for bad PEB handling: 8
ubi0: background thread "ubi_bgt0d" started, PID 536
UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 542
UBIFS (ubi0:0): recovery needed
UBIFS (ubi0:0): recovery completed
UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "plugin_ubifs"
UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi0:0): FS size: 60186624 bytes (57 MiB, 474 LEBs), journal size 3047424 bytes (2 MiB, 24 LEBs)
UBIFS (ubi0:0): reserved for root: 2842762 bytes (2776 KiB)
UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID A0E521A8-2F8E-443D-A3FF-AA6507C6CEE8, small LPT model
jffs2: notice: (519) check_node_data: wrong data CRC in data node at 0x000b2068: read 0x57993ab8, calculated 0xa752cfe1.
jffs2: notice: (544) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
up
mux=ffffe
mux=2abbf
mux=555aaaa
mux=2ce6fff0
storage_wakeup_proc_create success!
<verinfo_module_init>(993)---->verinfo=U-Boot V2.0.0T14 20171106180858 0x1d00000 0x0 0x83 0x82
addr==1d00000
<verinfo_module_init>(998)----><verinfo_module_init>(1000)----><verinfo_module_init>(1002)---->GN25L95 found.
data_in=0x0
data_in=0x0
register fpga driver success, major=222
register peripheral success, major = 106
= TM Module SYS FS Init ended successfully =
tm_initModule begin...
tm_pp_initial start
input: base=1320288256
upa_set_rr_mask_cfg input: upa_rr_mask = 0x2ab
api lock init!!
uopc_set_tcont_num is success!!
tm_pp_initial--------finish
tm_switch_initial----start
tm_switch_initial----finish
tm_initial successed !!!
tm_initModule end...
<3000000008>11930:22:59 [(1348)CheckLogConfFile] CheckLogConfFile%CheckRestartCntConfFile
up
ethdriver_init....
g_mii_dev_namesw
g_mii_dev_namepon
up
up
= EMAC Module SYS FS Init ended successfully =
******Initial emac module! *********
Debug: EPON PIN_MUX_REG3:(0x2cc2fff0)
EPONMAC init success!!!
epon alarm 21
******emac initial completed! *********
create eponmac_task_thread ok!
create eponmac_pondnup_task_thread ok!
zte_epon_Init begin
zte_epon_Init ok
<4000000005>11930:22:59 netlink_unicast failedmsgid = 0xa5c2, ptr = bf1f9c5c, len = 4
Init switch module
unicnt 4, wancnt 1, wifi cnt 2, all ports 7, portmask 0x000000ef
switch config EPON HGU mode!
-------chip_tm_init end-----
l2_fast init
set cpu queue rate limit to 8000pps
zte_api_sw_port_set_port_ratelimit port:(6) direct:(1) enable:(1) rate:(2048 kpbs) ifgMode:(1)
zte_api_sw_port_set_port_ratelimit port:(7) direct:(1) enable:(1) rate:(2048 kpbs) ifgMode:(1)
reg hff
reg get statistics
Init switch module Success
GN25L95 found.
bob is not ZX279511: a3
GN25L95 found.
Kmodule GN25L95.ko insmod successfully !
hw_power_optx_get_fordg:txdisable=0
GN25L95 found.
bsp_i2c_probe 0x50 success!
vendor name = ZTE_PX20+_E
optical PN(0x60) =
optical PN(0x28) = GN25L95
udpwatchd inited!
kudpinited!
Init codec_ec5 v1.9(2016-12-17)!
----VoIPCodecInit ch0
----VoIPCodecInit ch1
P_2833: Setup 0
DSP device setup OK!
up
up
redirusb_init success!
random: dbus-uuidgen urandom read with 20 bits of entropy available
pp======================================================
mounting /dev/mtdblock3 to /tagparam, wait ...
======================================================
======================================================
mounting /dev/mtdblock8 to /dbus, wait ...
======================================================
Pre-initialization script ...
Mounting devpts at /dev/pts
Mounting cgroup at /cgroup
mount: mounting ns on /sys/fs/cgroup/ns failed: No such file or directory
Mounting tmpfs at /run
Mounting tmpfs at /lock
Mounting tmpfs at /run/shm
Mounting ramdisk at /var
Mounting ramdisk at /usr/cpkTmp
Mounting ramdisk at /mnt
Mounting ramdisk at /tmp
Mounting /dev/mtdblock5 to /userconfig
Mount ok!
read mtdsize 131072
Copied 131072 bytes from address 0x00000000 in flash to /var/plugin
0000000 4255 2349 0001 0000 0000 0000 0000 0300
Has found plugin ubifsimg!
UBI device number 0, total 496 LEBs (62980096 bytes, 60.1 MiB), available 0 LEBs (0 bytes), LEB size 126976 bytes (124.0 KiB)
No need make volume!
Mounting ubifs /dev/mtdblock11 /opt/upt/apps
file exists!
======================================================
mounting /dev/mtdblock4 to /wlan, wait ...
======================================================
Configuring MAC interfaces
Bringing up interface lo
Bringing up interface mii0
<c000006375>11930:22:58 Ioctl failed!SIOCGIFFLAGS
Set promisc for device mii0
<c000006375>11930:22:58 Ioctl failed!SIOCGIFFLAGS
Configuring with no IP address (i.e. for PPP)
<c000006375>11930:22:58 Ioctl failed!SIOCGIFFLAGS
insmod: can't insert '/kmodule/ZX279511.ko': Operation not permitted
rmmod: can't unload 'ZX279511': unknown symbol in module, or unknown parameter
===================================================================
region code:232
region name:Henan
USER_CFG is same as ETC_CFG, donot need copy
===================================================================
Database default setting is
Mounting overlay lowerdir=/etc,upperdir=/opt/upt/apps/etc,workdir=/opt/upt/apps/etc_work /etc
Mounting overlay lowerdir=/usr,upperdir=/opt/upt/apps/usr,,workdir=/opt/upt/apps/usr_work /usr
Mounting overlay lowerdir=/lib,upperdir=/opt/upt/apps/lib,workdir=/opt/upt/apps/lib_work /lib
ln: /usr/lib/glib-2.0/glib-2.0: Read-only file system
===================================================================
run dbus-uuidgen
======================dbus-rcs end============================================
<a000000015>11930:23:01 Delete /var/run/dbus.pid,iRet=-1,will startdbus-daemon...
shellproxyctrl sendto success,iCnt=0!
action2operation result 0 (0: SHELLPROXY_OP_SUCESS -1: SHELLPROXY_OP_FAIL)
<c000000005>11930:23:01 simTaskInit!!!
<b000000005>11930:23:01 open device /dev/sim_dev error !
<c000000005>11930:23:01 simtask iStatus = -128!!!
<b000000005>11930:23:01 pdtSimCardGetStatus return CARD OFF!!!
F450
Login: <b000002205>11930:23:02 create table fail (VoIPBearInfo) domain(Ipv6Addr) error default value
<c000000005>11930:23:02 GetTagParam TAG_ID_GPON_CARD_USED failed
<b000002205>11930:23:02 create table fail (SimulationDHCP) domain(SimuMAC) error default value
<b000002205>11930:23:02 create table fail (STBMAC) domain(MAC) error default value
<b000000005>11930:23:02 regionCode:232=============
<c0000020e5>11930:23:02 not find row RowNo(3) table(DDNSService)
<c0000020e5>11930:23:02 not find row RowNo(3) table(DDNSService)
<c0000020e5>11930:23:02 not find row RowNo(3) table(DDNSService)
<c0000020e5>11930:23:02 not find row RowNo(3) table(DDNSService)
<c0000020e5>11930:23:02 not find row RowNo(3) table(DDNSService)
<c0000020e5>11930:23:02 not find row RowNo(3) table(DDNSService)
<c0000020e5>11930:23:02 not find row RowNo(3) table(DDNSService)
<c0000050c5>11930:23:02 get parameter from Flash failed!fxs: -7, 0
<c0000050c5>11930:23:02 get parameter from Flash failed!fxo: -7, 0
<b000002155>11930:23:02 default val error val() table(VoIPBearInfo) domain(Ipv6Addr)
<b000002155>11930:23:02 default val error val() table(SimulationDHCP) domain(SimuMAC)
<b000000005>11930:23:02 get loid passwordfrom flash failed !
<c0000050c5>11930:23:02 get parameter from Flash failed!VersionMode
----------------------------------------------<a000000005>11930:23:02 port_info.wWande = 0x0020
<a000000005>11930:23:02 mac=32769,781D4A8300B0,ps=781D4A8300B0.
opti not found.
<b000000005>11930:23:02 GetOptiDevNum failed!
10ge not found.
<b000000005>11930:23:02 GetE1DevNum failed!
cpuscheme not found.
<b000000005>11930:23:02 GetCPUScheme failed!
scheme not found.
<b000000005>11930:23:02 GetSlicScheme failed!
Open /proc/capability/opticalinfo fail!
<b000000005>11930:23:02 GetOptiScheme failed!
Open /proc/capability/opticalinfo fail!
<b000000005>11930:23:02 GetOptiCircuit failed!
<c0000050c5>11930:23:02 get parameter from Flash failed!VersionMode
=============dbDefOAMdebug==========
<c000000005>11930:23:02 get VENDOR_IDfrom flash failed !
<c000000005>11930:23:02 get Vendor_Specific from flash failed!
<c000000005>11930:23:02 get RegisterIDfrom flash failed !
<c000000005>11930:23:02 get Passwordfrom flash failed !
<c000000005>11930:23:02 get LoidPwdfrom flash failed !
<b000000005>11930:23:02 get loid passwordfrom flash failed !
<c0000050c5>11930:23:02 get parameter from Flash failed!HardwareVerTag
<c000000005>11930:23:03 ctUserInfo recieve EV_PON_LOSE message
<a00002a005>11930:23:05 VIP_VOIP: Read setmac value to ProtocolSet
<a000000005>11930:23:05 ======start dbus-server OK!=======
<a000000005>11930:23:05 ======start OK!==i=====
<c000000015>11930:23:05 RunProcess process Event dwUsedTicks
<c000000015>11930:23:05 RunProcess process Event dwUsedTicks
<c000000005>11930:23:06 BandInfo_main SET_TIMER
<c000000005>11930:23:06 The Dss' lpMsg is null.
EponSetPonMac get db mac is 78-1d-4a-83- 0-b0
parameter in:
OpType:0 mac:78:1D:4A:83:00:B0
<a000000005>11930:23:06 delaytick_start
<b000000005>11930:23:06 do not have sd port
<c000000005>11930:23:06 simStart!!!
<c000000005>11930:23:06 The type of board is none simcard board
<c000000005>11930:23:06 simStart, is not cardused!!!
<c000006375>11930:23:06 Ioctl failed!
<b000000005>11930:23:06 invalid interface
<c000000005>11930:23:06 startDhcp6sInst, create socket failed
IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready
up
set max age failed: Numerical result out of range
ethdrv_dev_ioctl,brdev_set.port_id 0 ,brdev_set.name eth0 ,brdev_set.flag 0
<c000006265>11930:23:06 Call function failed!BrAddCPUMAC len:30
<a000000005>11930:23:06 --start_gdbus-server-1-
up
ethdrv_dev_ioctl,brdev_set.port_id 1 ,brdev_set.name eth1 ,brdev_set.flag 0
<a000000005>11930:23:07 dbus connect register OK!
<a000000005>11930:23:07 DBShmCliInit
<a000000005>11930:23:07 OSSInitConfig
<a000000005>11930:23:07 OSSStart
up
ethdrv_dev_ioctl,brdev_set.port_id 2 ,brdev_set.name eth2 ,brdev_set.flag 0
up
ethdrv_dev_ioctl,brdev_set.port_id 3 ,brdev_set.name eth3 ,brdev_set.flag 0
up
<b000000005>11930:23:07 Set Timer 35s
<a000000005>11930:23:08 init[,,0]
<a000000005>11930:23:08 g_main_loop_run...
<c000000005>11930:23:08 may be client not start
<b000002075>11930:23:08 get view failed VID(203) VN() Err(-5)
<b000000005>11930:23:08 dbAPIGetView from RouteIFInfo fail(-5)
<b000000005>11930:23:08 ----exec interface_get error for ---
<b000000005>11930:23:08 getallcallback error
<a000000005>11930:23:08 ----
<a000000005>11930:23:08 ----
<a000000005>11930:23:08 ----
<a000000005>11930:23:08 ----
<a000000005>11930:23:08 ----
<a000000005>11930:23:08 start saf...
<a000000005>11930:23:08 multi init...
<a000000005>11930:23:08 ASEND error,and set timer1
insmod: can't insert '/kmodule/usbcore.ko': No such file or directory
insmod: can't insert '/kmodule/ehci-hcd.ko': No such file or directory
insmod: can't insert '/kmodule/uhci-hcd.ko': No such file or directory
Framework (active):
boot time is 15 Thu Jan1 00:00:15 1970
E8C RestoreStatus is 0
E8C UpgradeStatus is 0
Auto Starting Framework ...
insmod: can't insert '/kmodule/ohci-hcd': No such file or directory
registering usb led module!
mount: can't find /dev/ptmx in /etc/fstab
<c000000005>11930:23:09 s_dbus_need_delay flag set_timer!
<c000004015>11930:23:09 parameter is invalid!(ServList:8)
<c000004015>11930:23:09 parameter is invalid!(ServList:1)
<c000004015>11930:23:09 parameter is invalid!(ServList:4)
<b000000005>11930:23:09 dbQryDefaultRT: no default RT
<c000000005>11930:23:09 dbQryDefaultRT6: no default RT
<a000000005>11930:23:09 has [->:1.1]
iptables: Bad rule (does a matching rule exist in that chain?).
iptables: Bad rule (does a matching rule exist in that chain?).
iptables: Bad rule (does a matching rule exist in that chain?).
iptables: Bad rule (does a matching rule exist in that chain?).
iptables: Bad rule (does a matching rule exist in that chain?).
iptables: Bad rule (does a matching rule exist in that chain?).
iptables: Bad rule (does a matching rule exist in that chain?).
iptables: Bad rule (does a matching rule exist in that chain?).
<c000006265>11930:23:11 [ifs_api.c(2528ftp alg change port ok!
)GetBrPortInfo] rtsp alg change port ok!
Call function failed!
iptables: Bad rule (does a matching rule exist in that chain?).
iptables: Bad rule (does a matching rule exist in that chain?).
<c000000015>11930:23:12 sender = 0x000101a6 ,reciver = 0x00030201 , Event = 0x2311
<c000000015>11930:23:12 send ilen = -1 Len = 44errno=
<b000000015>11930:23:12 Send task Message to in SocketAsynSendMsg()ERROR !
<c000000015>11930:23:12 sender = 0x000101a6 ,reciver = 0x00020901 , Event = 0x4009
<c000000015>11930:23:12 send ilen = -1 Len = 40errno=
<b000000015>11930:23:12 Send task Message to in SocketAsynSendMsg()ERROR !
<b000000005>11930:23:12 Register IFS/VOIP/TR069 error,re register 30 sec later!
<c00000c265>11930:23:12 QQConfig Uplink now is down
<c000000005>11930:23:12 NR
<c000000005>11930:23:12 r
<b000017025>11930:23:12 |igmp_proxy_mgr| GetRouteIFInfo Failed
<b000017025>11930:23:12 |igmp_proxy_mgr| Wan State Not Valid 0
<b000017025>11930:23:12 |igmp_proxy_mgr| down stream IFcount Is 1
<b000000005>11930:23:12 Failed to open file /var/tmp/dns_l2tp_filter.conf.
<b000017005>11930:23:12 |igmp_proxy| ptr_upstream_ifaceName unspecified
======ftp conv==enable=1=====Init
iptables: Bad rule (does a matching rule exist in that chain?).
<b000000015>11930:23:12 asend EVENT sendto ERRORerrno=!!!
========PCsend Failed to send=========
iptables: Bad rule (does a matching rule exist in that chain?).
iptables: Bad rule (does a matching rule exist in that chain?).
<c000000005>11930:23:12 The Dss' lpMsg is null.
iptables: Bad rule (does a matching rule exist in that chain?).
iptables: Bad rule (does a matching rule exist in that chain?).
iptables: Bad rule (does a matching rule exist in that chain?).
iptables: Bad rule (does a matching rule exist in that chain?).
up
set_netdev_type dev (pon0) type (300) vendor name = ZTE_PX20+_E
optical PN(0x60) =
optical PN(0x28) = GN25L95
recv EV_NORMAL_START
<b000000005>11930:23:13 callGetTagParam failed!!!!
<b000000005>11930:23:13 call get_falsify_defend_mode failed! iRet = -7
-------------l2tp_start-----
<b000000015>11930:23:13 asend EVENT sendto ERRORerrno=!!!
========PCsend Failed to send=========
Start, trace_flags=00000000 (debug enabled)
OpenL2TP V1.8, (c) Copyright 2004-2010 Katalix Systems Ltd.
Loading plugin /lib/ppp_unix.so, version V1.5
iptables: No chain/target/match by that name.
<a000000005>11930:23:13 set_timer2ticks_for_other
ip6tables: No chain/target/match by that name.
<c000000005>11930:23:13 Send codefun is replaced by fun
warning! gpio event 0xa40c (keyid=0x10101keystatus=1) has no data
warning! gpio event 0xffff (keyid=0x10101keystatus=5) has no data
warning! gpio event 0xa40f (keyid=0x10101keystatus=2) has no data
<c000000005>11930:23:13 enable=0
<b000000005>11930:23:13 dbQryDefaultRT: no default RT
<c000000005>11930:23:13 dbQryDefaultRT6: no default RT
<b000000005>11930:23:13 not support wEvent:0x9615
<b000000005>11930:23:14 not support wEvent:0x9615
Cannot get Index:
Create brport: --
the brport not config index yet
device eth0 entered promiscuous mode
set_netdev_type dev (eth0) type (800) sh: can't create /proc/net/mtouch/Mtouch_enable: nonexistent directory
Cannot get Index:
Create brport: --
the brport not config index yet
device eth1 entered promiscuous mode
set_netdev_type dev (eth1) type (800) sh: can't create /proc/net/mtouch/Mtouch_enable: nonexistent directory
Cannot get Index:
Create brport: --
the brport not config index yet
device eth2 entered promiscuous mode
set_netdev_type dev (eth2) type (800) sh: can't create /proc/net/mtouch/Mtouch_enable: nonexistent directory
Cannot get Index:
Create brport: --
the brport not config index yet
device eth3 entered promiscuous mode
eponoam_monitor_init...
<c000000005>11930:23:14 BU SERVICE INIT
<c000000005>11930:23:14 BU SERVICE PROV INIT
<b000000005>11930:23:14 buCounter file path not exit
<c000000005>11930:23:14 register to SNTP success.
set_netdev_type dev (eth3) type (800) sh: can't create /proc/net/mtouch/Mtouch_enable: nonexistent directory
<c000000005>11930:23:14 dbusGetWancProtoInfo WANC_ID:IGD.WD1.WCD1.WCIP1 fail!
<c000000005>11930:23:14 dbusSetWancStatsInfo() WANC_ID:IGD.WD1.WCD1.WCIP1 fail!
<b000000005>11930:23:14 dbusGetWancStats fail, iRet=1
<c000000005>11930:23:14 dbusGetWancProtoInfo WANC_ID:IGD.WD1.WCD1.WCIP1 fail!
<c000000005>11930:23:14 dbusSetWancStatsInfo() WANC_ID:IGD.WD1.WCD1.WCIP1 fail!
<b000000005>11930:23:14 dbusGetWancStats fail, iRet=1
<c000006265>11930:23:14 Call function failed!
<c000000005>11930:23:14 dbusGetWancProtoInfo WANC_ID:IGD.WD1.WCD2.WCPPP1 fail!
<c000000005>11930:23:14 dbusSetWancStatsInfo() WANC_ID:IGD.WD1.WCD2.WCPPP1 fail!
<b000000005>11930:23:14 dbusGetWancStats fail, iRet=1
<c000006265>11930:23:14 Call function fa
iled![IGD.WD1.WCregister mt_drv
D2.WCPPP1]
<c00init the wifi hardware forward handler(to idm0)
0000005>11930:23init the wifi hardware forward handler(to idm1)
:14 [Wamt_drv 0000:00:00.0: enabling device (0140 -> 0142)
rn] dbusGetWancProtoInfo WANC_ID:IGD.WD1.WCD2.WCPPP1 fail!
<c000000005>11930:23:14 dbusSetWancStatsInfo()
=== pAd = d350d000, size = 916040 ===
WANC_ID:IGD.WD1<-- RTMPAllocTxRxRingMemory, Status=0, ErrorValue=0x
.WCD2.WCPPP1 fai<-- RTMPAllocAdapterBlock, Status=0
l!
<b000000005>pAd->CSRBaseAddress =0xd3600000, csr_addr=0xd3600000!
11930:23:14 [srvdevice_id =0x7603
Info] [dbRtmpChipOpsHook(507): Not support for HIF_MT yet!
us_wanConnect(85mt7603_init()-->
9)handle_dbus_wamt_bcn_buf_init(224): Not support for HIF_MT yet!
n] dbusGetWancSt<--mt7603_init()
ats fail, iRet=1
<b000000005>11930:23:14 dbusPreSetWancInfo fail!
<c000000005>11930:23:14 dbusGetWancProtoInfo WANC_ID:IGD.WD1.WCD3.WCPPP1 fail!
<c000000005>11930:23:14 dbusSetWancStatsInfo() WANC_ID:IGD.WD1.WCD3.WCPPP1 fail!
<b000000005>11930:23:14 dbusGetWancStats fail, iRet=1
<b000000005>11930:23:14 dbusPreSetWancInfo fail!
<c000000005>11930:23:14 dbusGetWancProtoInfo WANC_ID:IGD.WD1.WCD3.WCPPP1 fail!
<c000000005>11930:23:14 dbusSetWancStatsInfo() WANC_ID:IGD.WD1.WCD3.WCPPP1 fail!
<b000000005>11930:23:14 dbusGetset_netdev_type dev (pon0) type (300) WancStats fail, iRet=1
<c000000005>11930:23:14 dbusGetWancProtoInfo WANC_ID:IGD.WD1.WCD4.WCIP1 fail!
<c000000005>11930:23:14 dbusSetWancStatsInfo() WANC_ID:IGD.WD1.WCD4.WCIP1 fail!
<b000000005>11930:23:14 dbusGetWancStats fail, iRet=1
<c000000005>11930:23:14 [dbus_wanConnect(1101)dbusGetWancSta
t] dbusGetWancPrTX_BCN DESC c08d6a00 size = 320
otoInfo WANC_ID:RX DESC c0ff2800 size = 2048
IGD.WD1.WCD4.WCIRX DESC c0ff3000 size = 2048
P1 fail!
<c000000005>11930:23:14 dbusSetWancStatsInfo() WANC_ID:IGD.WD1.WCD4.WCIP1 fail!
<b000000005>11930:23:14 dbusGetWancStats fail, iRet=1
<b000000005>11930:23:14 dbQryDefaultRT: no default RT
<c000cfg_mode=9
000005>11930:23:cfg_mode=9
14 [Warwmode_band_equal(): Band Equal!
n] [route6_mgr.c(228)dbV6InitDefKey1Str is Invalid key length(0) or Type(0)
gVal] dbQryDefauKey1Str is Invalid key length(0) or Type(0)
ltRT6: no defaulKey1Str is Invalid key length(0) or Type(0)
t RT
<b00000000Key1Str is Invalid key length(0) or Type(0)
5>11930:23:14 [iKey2Str is Invalid key length(0) or Type(0)
fs_mgr] [Key2Str is Invalid key length(0) or Type(0)
route_mgr.c(2424Key2Str is Invalid key length(0) or Type(0)
)dbInitDefgValueKey2Str is Invalid key length(0) or Type(0)
] dbQryDefaultRTKey3Str is Invalid key length(0) or Type(0)
Key3Str is Invalid key length(0) or Type(0)
<c000000005>119Key3Str is Invalid key length(0) or Type(0)
30:23:14 [ifs_mgKey3Str is Invalid key length(0) or Type(0)
r] [route6Key4Str is Invalid key length(0) or Type(0)
_mgr.c(228)dbV6IKey4Str is Invalid key length(0) or Type(0)
nitDefgVal] dbQrKey4Str is Invalid key length(0) or Type(0)
yDefaultRT6: no Key4Str is Invalid key length(0) or Type(0)
default RT
<b000000005>11930:23:14 dbQryDefaultRT: no default RT
<FW Version:c000000005>11930_:23:14 m dbQryD6efaultRT6: no de0fault RT
<c0000304025>11930:23:1m4 [ifs_notifier.c(365)delRegNoti
fier] parameter FW Build Date:is illegal!not f2ound, pid0
<c000004025>111930:23:14 pa2rameter is illeg0al!not found, pi1d
<c0000504025>11930:23:154 parameter is illegal!not f
ound, pid
<c000004025>11930:23:14 parameter is illegal!not found, pid
<a000000005>11930:23:14 nomal nCmdAddressLenReq:(ret = 0)
oti add telnet
CmdFwStartReq: override = 1, address = 1048576
<c000000005>1193CmdStartDLRsp: WiFI FW Download Success
0:23:14 obj_path=/com/ctc/igd1/Network/Telnetserver/Accounts/0
<c000000005>11930:23:14 obj_path=/com/ctc/igd1/NAsicDMASchedulerInit(): DMA Scheduler Mode=0(LMAC)
etwork/Telnetserefuse_probe: efuse = 10000002
ver/Accounts/1
RtmpChipOpsEepromHook::e2p_type=0, inf_Type=5
<c000000005>1193RtmpEepromGetDefault::e2p_dafault=1
0:23:14 [WNVM is efuse and the information is too less to bring up the interface
arn] [thttpd.c(1Force to use Flash mode
938)web_init] thRtmpChipOpsEepromHook: E2P type(2), E2pAccessMode = 0, E2P default = 1
ttpd send 0
<cNVM is FLASH mode, flash_offset = 0x40000
000000005>11930:1. Phy Mode = 14
@@@NICReadEEPROMParameters : pAd->FWLoad=0 enObjL] CspGetHiddenObjNum size 9!
<c000000005>11930:23:14 MediaStart inform!!!
<c000000005>11930:23:14 send EV_SIM_OPEN_PON to SIMCARD_MEDIA_CORE_PID!
<c000000015>11930:23:14 sender = 0x00030701 ,reciver = 0x00840101 , Event = 0xe826
<c000000015>11930:23:14 send ilen = -1 Len = 32errno=
<b000000015>11930:23:14 Send task Message to in SocketAsynSendMsg()ERROR !
<c000000005>11930:23:14 send EV_SIM_OPEN_PON to pon_mgr, left times 2!
<c000000005>11930:23:14 pObjName X_CT-COM_WANGponLinkConfig!
<c000000005>11930:23:14 AddHiddenItems szObjName X_CT-COM_WANGponLinkConfig!
<c000000005>11930:23:14 pObjName X_CT-COM_GponInterfaceConfig!
<c000000005>11930:23:14 AddHiddenItems szObjName X_CT-COM_GponInterfaceConfig!
<c000000005>11930:23:14 pObjName X_CT-COM_GponInterafceConfig!
<c000000005>11930:23:14 AddHiddenItems szObjName X_CT-COM_GponInterafceConfig!
<b000017005>11930:23:14 |igmp_proxy| ptr_upstream_ifaceName unspecified
<c000000005>11930:23:15 ***g_Tr069SimCardUsed succes! value=0***
<c000000005>11930:23:15 Need notice web disable RegButton,IsHaveBOOTSTRAP is 0!
<c02. Phy Mode = 14
00000005>11930:23. Phy Mode = 14
3:15 [WarMCS Set = ff ff 00 00 01
n] RebootAlarm send EV_TR069_ALARM_EVENT !!!
<c000000005>11930:23:15 Receive EV_TR069_ALARM_EVENT:alarmno=104001,status= 1.
<c000000005>11930:23:15 UnconfigA<==== rt28xx_init, Status=0
larmEable turn off.
@@@ ed_monitor_exit : ===>
@@@ ed_monitor_exit : <===
mt7603_set_ed_cca: TURN OFF EDCCAmac 0x10618 = 0xd7083f0f
WiFi Startup Cost (wlan0): 0.510s
up
Cannot get Index:
Cannot get Index:
Cannot get Index:
Cannot get Index:
Cannot get Index:
Cannot get Index:
Cannot get Index:
Cannot get Index:
####Config existed br_port's index
####0,ffffffff<b000000015>11930:23:15 asend EVENT sendto ERRORerrno=!!!
========PCsend Failed to send=========
never heard of command
Usage: brctl
commands:
addbr <bridge> add bridge
delbr <bridge> delete bridge
addif <bridge> <device> add interface to bridge
delif <bridge> <device> delete interface from bridge
setageing <bridge> <time> set ageing time
setbridgeprio <bridge> <prio> set bridge priority
setfd <bridge> <time> set bridge forward delay
sethello <bridge> <time> set hello time
setmaxage <bridge> <time> set max message age
setpathcost <bridge> <port> <cost>set path cost
setportprio <bridge> <port> <prio>set port priority
show show a list of bridges
showmacs <bridge> show a list of mac addrs
showstp <bridge> show bridge stp info
stp <bridge> {on|off} turn stp on/off
vlanbind <bridge> set bridge vlan bind
showvlanbind <bridge> show bridge vlan bind
vlanlearn <bridge> show bridge port learned vlan
setinetroutebind <bridge> <port> <1/0> set device bind internet route wan connection
delmtouchmac <bridge> <MAC>set delete magic touch device mac
delmtouchport <bridge> <port> set delete magic touch device mac
setserverlist <bridge> <port> <1/0> set device serverlist common
getserverlist <bridge> <port> get device serverlist common
<c000006265>11930:23:15 Call function failed!doGetMapInfoByConnID,IGD.WD1.WCD2.WCPPP1
Cannot get Index:
Cannot get Index:
Cannot get Index:
Cannot get Index:
Cannot get Index:
Cannot get Index:
Cannot get Index:
Cannot get Index:
####Config existed br_port's index
####0,ffffffff####1,fffffffe####0,fffffffd####Config existed br_port's index
####1,fffffffa####2,fffffffd####0,fffffffd####2,fffffffdnever heard of command
Usage: brctl
commands:
addbr <bridge> add bridge
delbr <bridge> delete bridge
addif <bridge> <device> add interface to bridge
delif <bridge> <device> delete interface from bridge
setageing <bridge> <time> set ageing time
setbridgeprio <bridge> <prio> set bridge priority
setfd <bridge> <time> set bridge forward delay
sethello <bridge> <time> set hello time
setmaxage <bridge> <time> set max message age
setpathcost <bridge> <port> <cost>set path cost
setportprio <bridge> <port> <prio>set port priority
show show a list of bridges
showmacs <bridge> show a list of mac addrs
showstp <bridge> show bridge stp info
stp <bridge> {on|off} turn stp on/off
vlanbind <bridge> set bridge vlan bind
showvlanbind <bridge> show bridge vlan bind
vlanlearn <bridge> show bridge port learned vlan
setinetroutebind <bridge> <port> <1/0> set device bind internet route wan connection
delmtouchmac <bridge> <MAC>set delete magic touch device mac
delmtouchport <bridge> <port> set delete magic touch device mac
setserverlist <bridge> <port> <1/0> set device serverlist common
getserverlist <bridge> <port> get device serverlist common
<c000006265>11930:23:16 Call function failed!doGetMapInfoByConnID,IGD.WD1.WCD2.WCPPP1
####Config existed br_port's index
####1,fffffff2####3,fffffffd####0,fffffffd####2,fffffffd####3,fffffffdnever heard of command
Usage: brctl
commands:
addbr <bridge> add bridge
delbr <bridge> delete bridge
addif <bridge> <device> add interface to bridge
delif <bridge> <device> delete interface from bridge
setageing <bridge> <time> set ageing time
setbridgeprio <bridge> <prio> set bridge priority
setfd <bridge> <time> set bridge forward delay
sethello <bridge> <time> set hello time
setmaxage <bridge> <time> set max message age
setpathcost <bridge> <port> <cost>set path cost
setportprio <bridge> <port> <prio>set port priority
show show a list of bridges
showmacs <bridge> show a list of mac addrs
showstp <bridge> show bridge stp info
stp <bridge> {on|off} turn
random: nonblocking pool is initialized
stp on/off
vlanbind <bridge> set bridge vlan bind
showvlanbind <bridge> show bridge vlan bind
vlanlearn <bridge> show bridge port learned vlan
setinetroutebind <bridge> <port> <1/0> set device bind internet route wan connection
delmtouchmac <bridge> <MAC>set delete magic touch device mac
delmtouchport <bridge> <port> set delete magic touch device mac
setserverlist <bridge> <port> <1/0> set device serverlist common
getserverlist <bridge> <port> get device serverlist common
<c000006265>11930:23:16 Call function failed!doGetMapInfoByConnID,IGD.WD1.WCD2.WCPPP1
####1,ffffffe2####4,fffffffd####0,fffffffd####2,fffffffd####3,fffffffd####4,fffffffd####1,ffffffc2####5,fffffffd####0,fffffffd####2,fffffffd####3,fffffffd####4,fffffffd####5,fffffffd####1,ffffff82####6,fffffffd####0,fffffffd####2,fffffffd####3,fffffffd####4,fffffffd####5,fffffffd####6,fffffffd####1,ffffff02####7,fffffffd####0,fffffffd####2,fffffffd####3,fffffffd####4,fffffffd####5,fffffffd####6,fffffffd####7,fffffffd<c000006265>11930:23:17 Call function failed!doGetMapInfoByConnID,IGD.WD1.WCD2.WCPPP1
<c000004025>11930:23:18 parameter is illegal!not found, pid
<c000004025>11930:23:18 parameter is illegal!not found, pid
account_policy_get: tdb_fetch_uint32 failed for field 1 (min password length), returning 0
account_policy_get: tdb_fetch_uint32 failed for field 2 (password history), returning 0
account_policy_get: tdb_fetch_uint32 failed for field 3 (user must logon to change password), returning 0
account_policy_get: tdb_fetch_uint32 failed for field 4 (maximum password age), returning 0
account_policy_get: tdb_fetch_uint32 failed for field 5 (minimum password age), returning 0
account_policy_get: tdb_fetch_uint32 failed for field 6 (lockout duration), returning 0
account_policy_get: tdb_fetch_uint32 failed for field 7 (reset count minutes), returning 0
account_policy_get: tdb_fetch_uint32 failed for field 8 (bad lockout attempt), returning 0
account_policy_get: tdb_fetch_uint32 failed for field 9 (disconnect time), returning 0
account_policy_get: tdb_fetch_uint32 failed for field 10 (refuse machine password change), returning 0
Added user useradmin.
iptables: Bad rule (does a matching rule exist in that chain?).
iptables: Bad rule (does a matching rule exist in that chain?).
<b000000015>11930:23:20 asend EVENT sendto ERRORerrno=!!!
========PCsend Failed to send=========
<b000017005>11930:23:20 |igmp_proxy| ptr_upstream_ifaceName unspecified
<b000000015>11930:23:20 asend EVENT sendto ERRORerrno=!!!
========PCsend Failed to send=========
<c000000005>11930:23:21 :1.2,{'OperAddr': <'101.227.255.170'>}
<b000000005>11930:23:21 file ponuptime not exit!
br_filter_conf:-
br_filter_conf:-
<c000000005>11930:23:21 Operat Dns Cheat
<c000000005>11930:23:21 ctSetRegisterStatus2Br bEnable 0
<c000000005>11930:23:21 NR
<c000000005>11930:23:21 r
<b000000005>11930:23:21 Failed to open file /var/tmp/dns_l2tp_filter.conf.
<b000016005>11930:23:21 |dnsmasq| bind interface socket failed
<c000000005>11930:23:21 getall_wanc
<b000000005>11930:23:21 dbusPreSetWancInfo fail!
<c000000005>11930:23:21 dbusGetWancProtoInfo WANC_ID:IGD.WD1.WCD3.WCPPP1 fail!
<c000000005>11930:23:21 dbusSetWancStatsInfo() WANC_ID:IGD.WD1.WCD3.WCPPP1 fail!
<b000000005>11930:23:21 dbusGetWancStats fail, iRet=1
<b000017005>11930:23:21 |igmp_proxy| ptr_upstream_ifaceName unspecified
<c000000005>11930:23:22 getall_wanc
<b000000005>11930:23:22 dbusPreSetWancInfo fail!
<c000000005>11930:23:22 dbusGetWancProtoInfo WANC_ID:IGD.WD1.WCD3.WCPPP1 fail!
<c000000005>11930:23:22 dbusSetWancStatsInfo() WANC_ID:IGD.WD1.WCD3.WCPPP1 fail!
<b000000005>11930:23:22 dbusGetWancStats fail, iRet=1
RT28xxPciAsicRadioOff(): Not support for HIF_MT yet!
RTMPDrvClose call RT28xxPciAsicRadioOff fail !!
tx_kickout_fail_count = 0
tx_timeout_fail_count = 0
rx_receive_fail_count = 0
alloc_cmd_msg = 40
free_cmd_msg = 40
down
<b000000015>11930:23:22 asend EVENT sendto ERRORerrno=!!!
========PCsend Failed to send=========
TX_BCN DESC c08d6a00 size = 320
RX DESC c0ff2800 size = 2048
RX DESC c0ff3000 size = 2048
cfg_mode=9
cfg_mode=9
wmode_band_equal(): Band Equal!
Key1Str is Invalid key length(0) or Type(0)
Key1Str is Invalid key length(0) or Type(0)
Key1Str is Invalid key length(0) or Type(0)
Key1Str is Invalid key length(0) or Type(0)
Key2Str is Invalid key length(0) or Type(0)
Key2Str is Invalid key length(0) or Type(0)
Key2Str is Invalid key length(0) or Type(0)
Key2Str is Invalid key length(0) or Type(0)
Key3Str is Invalid key length(0) or Type(0)
Key3Str is Invalid key length(0) or Type(0)
Key3Str is Invalid key length(0) or Type(0)
Key3Str is Invalid key length(0) or Type(0)
Key4Str is Invalid key length(0) or Type(0)
Key4Str is Invalid key length(0) or Type(0)
Key4Str is Invalid key length(0) or Type(0)
Key4Str is Invalid key length(0) or Type(0)
FW Version:_mt7603mp
FW Build Date:20151020155902
AsicDMASchedulerInit(): DMA Scheduler Mode=0(LMAC)
efuse_probe: efuse = 10000002
RtmpChipOpsEepromHook::e2p_type=0, inf_Type=5
RtmpEepromGetDefault::e2p_dafault=1
NVM is efuse and the information is too less to bring up the interface
Force to use Flash mode
RtmpChipOpsEepromHook: E2P type(2), E2pAccessMode = 0, E2P default = 1
NVM is FLASH mode, flash_offset = 0x40000
1. Phy Mode = 14
@@@NICReadEEPROMParameters : pAd->FWLoad=1
2. Phy Mode = 14
3. Phy Mode = 14
MCS Set = ff ff 00 00 01
<==== rt28xx_init, Status=0
@@@ ed_monitor_exit : ===>
@@@ ed_monitor_exit : <===
mt7603_set_ed_cca: TURN OFF EDCCAmac 0x10618 = 0xd7083f0f
WiFi Startup Cost (wlan0): 0.320s
up
<b000000005>11930:23:23 file ponuptime not exit!
memshr init OK
this is the kernel dpi loaded by maxnet, (0xbf486000, 188594)
cfg_mode=9
wmode_band_equal(): Band Equal!
<c000000005>11930:23:24 send EV_SIM_OPEN_PON, left times 2!
<b000000005>11930:23:25 file ponuptime not exit!
update all engine status(1)
<b000000005>11930:23:26 time is 33!
<b000000005>11930:23:26 tagid 32769
<b000000005>11930:23:26 tagparam file same, no need copy!
==>Set_VlanSupport_Proc()
<b000000005>11930:23:27 CmGetPrivateProfileInt: GetPrivateProfileInt FAILURE!
<c000000015>11930:23:27 RunProcess process Event dwUsedTicks
<c000000005>11930:23:28 multi_not_init for
<c000000005>11930:23:28 multi_not_init for
<c000000005>11930:23:28 multi_not_init for
<c000000005>11930:23:28 multi_not_init for
set_netdev_type dev (wlan0) type (1) <c000000015>11930:23:30 RunProcess process Event dwUsedTicks
Create brport: --
device wlan0 entered promiscuous mode
br0: port 5(wlan0) entered forwarding state
br0: port 5(wlan0) entered forwarding state
IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready
set_netdev_type dev (wlan0) type (801) sh: can't create /proc/net/mtouch/Mtouch_enable: nonexistent directory
never heard of command
Usage: brctl
commands:
addbr <bridge> add bridge
delbr <bridge> delete bridge
addif <bridge> <device> add interface to bridge
delif <bridge> <device> delete interface from bridge
setageing <bridge> <time> set ageing time
setbridgeprio <bridge> <prio> set bridge priority
setfd <bridge> <time> set bridge forward delay
sethello <bridge> <time> set hello time
setmaxage <bridge> <time> set max message age
setpathcost <bridge> <port> <cost>set path cost
setportprio <bridge> <port> <prio>set port priority
show show a list of bridges
showmacs <bridge> show a list of mac addrs
showstp <bridge> show bridge stp info
stp <bridge> {on|off} turn stp on/off
vlanbind <bridge> set bridge vlan bind
showvlanbind <bridge> show bridge vlan bind
vlanlearn <bridge> show bridge port learned vlan
setinetroutebind <bridge> <port> <1/0> set device bind internet route wan connection
delmtouchmac <bridge> <MAC>set delete magic touch device mac
delmtouchport <bridge> <port> set delete magic touch device mac
setserverlist <bridge> <port> <1/0> set device serverlist common
getserverlist <bridge> <port> get device serverlist common
<c000006265>11930:23:30 Call function failed!doGetMapInfoByConnID,IGD.WD1.WCD2.WCPPP1
<c000006265>11930:23:32 Call function failed!GetRouteIFInfo
<c000006265>11930:23:32 Call function failed!doGetMapInfoByConnID,IGD.WD1.WCD2.WCPPP1
<b000000015>11930:23:34 asend EVENT sendto ERRORerrno=!!!
========PCsend Failed to send=========
<c000000005>11930:23:34 NR
<c000000005>11930:23:34 r
<b000000005>11930:23:34 Failed to open file /var/tmp/dns_l2tp_filter.conf.
<c000000005>11930:23:34 send EV_SIM_OPEN_PON, left times 1!
<c000000015>11930:23:42 sender = 0x000101a6 ,reciver = 0x00020901 , Event = 0x4009
<c000000015>11930:23:42 send ilen = -1 Len = 40errno=[2:No 再放着不动5分子左右会出来新的字符
676/cspd
<c000000005>00:00:30 getall_wanc
<b000000005>00:00:30 dbusPreSetWancInfo fail!
<c000000005>00:00:30 dbusGetWancProtoInfo WANC_ID:IGD.WD1.WCD3.WCPPP1 fail!
<c000000005>00:00:30 dbusSetWancStatsInfo() WANC_ID:IGD.WD1.WCD3.WCPPP1 fail!
<b000000005>00:00:30 dbusGetWancStats fail, iRet=1
然后就没了按root什么的全部没反应
补充内容 (2018-5-31 20:11):
放一晚上还是这，试了三个终端，都一样不能输入 可能是发Y送端和接受端反向了或者发送端线接触不良 或者换个其他工具不要用PUTTy louis000 发表于 2018-5-31 12:04
可能是发Y送端和接受端反向了或者发送端线接触不良 或者换个其他工具不要用PUTTy
能试的都试过了，反接没输出，又重新焊接了ttl接口，还是不行。ctrl+c按着开机上电，还有cpl中断，全部没用。打字终端就是无显示。
不知道是不是原厂屏蔽，万用表测量焊接插针与电阻不通，插针直插到底，重新焊接多次情况依旧。刚刚从插针飞线到电阻，可以输入字符。此贴终结。
页:
[1]