__毐藥 发表于 2016-6-24 11:52:58

关于F450G破解问题。

网上买了个F450G 自己参照网上的TTL教程破解，在读取过程中一直在重复这句代码
Launch app samba
jniApp:debug:144.489:oalVosMsg_receive:365:reading segment: soFar=0 total=39
jniApp:debug:144.489:JIS_jsonAnalyzeMethods:61:sendAndGetReply sucess (ret=0)
jniApp:debug:144.489:JIS_jsonAnalyzeMethods:67:respBuf={ "ID": 0, "_Source": 0, "Result": 0 }
Get bundleManage Config Admin
DMS: CDS Scanning Done: there isn't media file. Re-try it after 1 minute.
DMS: CDS Scanning Done: there isn't media file. Re-try it after 1 minute.
DMS: CDS Scanning Done: there isn't media file. Re-try it after 1 minute.
DMS: CDS Scanning Done: there isn't media file. Re-try it after 1 minute.
DMS: CDS Scanning Done: there isn't media file. Re-try it after 1 minute.
DMS: CDS Scanning Done: there isn't media file. Re-try it after 1 minute.
DMS: CDS Scanning Done: there isn't media file. Re-try it after 1 minute.
DMS: CDS Scanning Done: there isn't media file. Re-try it after 1 minute.
请教各位大神，这是什么情况？
用超级终端和CRT 都是卡在这里。

setttt 发表于 2016-6-24 12:10:36

本帖最后由 setttt 于 2016-6-24 12:13 编辑

贝尔E-140W-P TX和RX标反了,要反着接，F450G也一样，或者你软件设置上有错误，对照此帖http://koolshare.cn/thread-46858-1-1.html

__毐藥 发表于 2016-6-24 12:14:07

setttt 发表于 2016-6-24 12:10
贝尔E-140W-P TX和RX标反了,要反着接，F450G也一样

是反着接的，不然读取不了代码

setttt 发表于 2016-6-24 12:17:11

__毐藥 发表于 2016-6-24 12:14
是反着接的，不然读取不了代码

软件设置错误，已发，回复审核中

__毐藥 发表于 2016-6-24 12:25:18

setttt 发表于 2016-6-24 12:17
软件设置错误，已发，回复审核中

对照别人教程里设置的，就只改了个端口位数115200。

setttt 发表于 2016-6-24 12:32:10

__毐藥 发表于 2016-6-24 12:25
对照别人教程里设置的，就只改了个端口位数115200。

你再好好检查一下，你这是重复进不了端口

__毐藥 发表于 2016-6-24 12:34:27

setttt 发表于 2016-6-24 12:32
你再好好检查一下，你这是重复进不了端口

嗯。我再看看，还是要谢谢你
页: [1]
查看完整版本: 关于F450G破解问题。