hudong19 发表于 2015-3-21 15:06:03

HG100n进入CFE的密码

CFE version 1.7.37-104.5 for BCM96328 (32bit,SP,BE)
Build Date: Wed Aug 31 13:40:45 CST 2011 (tyrone@sw3-code-build-srv-02)
Copyright (C) 2000-2009 Broadcom Corporation.
HS Serial flash device: name MX25L32, id 0xc216 size 4096KB
Total Flash size: 4096K with 79 sectors
Flash not used for Auxillary File System
Chip ID: BCM6328B0, MIPS: 320MHz, DDR: 320MHz, Bus: 160MHz
Main Thread: TP0
Memory Test Passed
Total Memory: 67108864 bytes (64MB)
Boot Address: 0xb8000000
** Flash image not found. **
Board IP address                  : 192.168.1.1:ffffff00
Host IP address                   : 192.168.1.100
Gateway IP address                :   
Run from flash/host (f/h)         : f
Default host run file name      : vmlinux
Default host flash file name      : bcm963xx_fs_kernel
Boot delay (0-9 seconds)          : 1
Board Id (0-7)                  : 96328avng
Number of MAC Addresses (1-32)    : 10
Base MAC Address                  : 00:10:18:00:00:00
PSI Size (1-64) KBytes            : 24
Enable Backup PSI          : 0
System Log Size (0-256) KBytes    : 0
Flash Block Size (1-128) in KBytes: 64
Auxillary File System Size Percent: 0
Main Thread Number           : 0
Serial Number                     : 47900001FA3B98504
Password for Useradmin            : 0019cb000001
SSID for first wireless (10-31)   : Huatian
Password for first wireless (8-31): 0019cb000001
PA(e=External PA,i=Internal PA)   : i
Minimal Core Max Size (0-2097152) in Bytes: 0
The Max Size of Minimal Core is 0, can't boot Minimal Core Successfully
login:telecomadmin
Password:Login failed, invalid password
login:telecomadmin
Password:Login failed, invalid password


用户:telecomadmin 密码:telecomadmin
用户:telecomadmin 密码:nE7jA%5m
这两个都试过,进不去

zxczxc213 发表于 2015-3-31 14:23:50

烽火的破解很简单,打开登陆页面,不要输入密码,然后右键查看源代码,BASE64解析就看到了
页: [1]
查看完整版本: HG100n进入CFE的密码