z68021015 发表于 2014-8-13 23:46:20

8245c 108版的su命令是权限命令吗

8245c 108版的su命令是权限命令吗

ringz 发表于 2014-8-14 08:54:12

108版本不能telnet怎么运行命令呢

z68021015 发表于 2014-8-14 11:29:39

TTL线连接就可以

supertailanyu 发表于 2014-8-14 13:13:05

怎么样链接TTL线，有没有大虾奉献下详细的教程，谢谢

z68021015 发表于 2014-8-14 14:39:02

很早就有了教程了看看我以前发的贴

supertailanyu 发表于 2014-8-14 18:50:43

我接上了TTL板，但是没有显示输入命令行的，我的是108的加密，TELNET不行，23端口已经被封了

z68021015 发表于 2014-8-14 21:04:20

TTL你没用过？

z68021015 发表于 2014-8-14 21:45:10

AP>load pack by tftp svrip 127.0.0.1 remotefile D46AA8_V3R013C10S103.bin<SWM>HW_SWM_RPC_CliLoadPack acChnlName=tftp,acIpAddr=127.0.0.1,acRemoteFile=D46AA8_V3R013C10S103.bin,Port=0;
<hw_swm_manage.c:2060> 11
<SWM>HW_SWM_RPC_CliLoadPack HW_SWM_MainProc uiRet=0x0;
<SWM>Start Load Thread!

success!
WAP><SWM>tftp -i -l "/var/swm_receive_fifo" -r "D46AA8_V3R013C10S103.bin" -g "127.0.0.1" &
ucChannelType:3
tftp: timeout
             <SWM>HW_SWM_ReceiveThread TimeOut!AccTimeOut=120s,IntervTimeOut=120s
<SWM>receive thread. olt crc:
kill -9 $(pidof tftp).
sh: you need to specify whom to kill
                                    <SWM>HW_SWM_ReceiveThread Exit!uiRet=0xf7204030
<SWM>Set Load Failed!
<SWM>Wait Sem OK!
<SWM> receive thread exit error:-148881360!
<SWM>HW_SWM_StopRcv!uiPara=0xf7204030
<SWM>Start join recv thread!
<SWM>End join recv thread!
<SWM>uiResult=
<SWM>uiResult=
<hw_swm_manage.c:2060> 11
<SWM>Before:ProcLen=,RecvLen=
<SWM>After:ProcLen=,RecvLen=
<SWM>HW_SWM_Notify Notify by Mid_19 Err_0xf7204030
<SWM>receive olt crc:
<SWM>Set Load Failed!
<SWM>HW_SWM_StopRcv!uiPara=0xf7204030
<SWM>HW_SWM_EndDeal Replay to ssmp_11 Err_0xf7204030 NotifyCode_0x3
Software Operation Faild!RetCode=0xf7204030!
<SWM>HW_SWM_EndDeal PthreadJoin !ThreadId_1186677952.
<SWM>**** begin! uiProcResult:0xf7204030****
<SWM>
<SWM>##### end! uiRet:0x0#####

z68021015 发表于 2014-8-14 21:58:21

真难，谁会？？？？？？、

supertailanyu 发表于 2014-8-15 00:04:52

108加密的，我焊接上ttl线，开机就是一直出数据，也没有输入用户名和密码的
页: [1] 2 3
查看完整版本: 8245c 108版的su命令是权限命令吗