db120wn 能CFE,打不开192.168.1.1
db120wn 能CFE,打不开192.168.1.1.....成砖没有?怎么刷机啊? 没有,进cfe 刷个好的固件就行了 换个浏览器再试试看... zhjook 发表于 2014-3-9 09:55没有,进cfe 刷个好的固件就行了
网页上已经不能ping通192.168.1.1了,怎么用CFE刷机呢?我现在的情况就是CFE可以读取数据,但是没法登录网页,怎么设置都不行
CFE version 1.0.37-102.9 for BCM96358 (32bit,SP,BE)
Build Date: Thu Jan 15 20:34:16 PST 2009 (root@pclinux-lkaplan)
Copyright (C) 2000-2008 Broadcom Corporation.
Parallel flash device: name AM29LV320MT, id 0x2201, size 16384KB
Auto-negotiation timed-out
10 MB Half-Duplex (assumed)
CPU type 0x2A010: 300MHz, Bus: 133MHz, Ref: 64MHz
CPU running TP0
Total memory: 33554432 bytes (32MB)
Boot Address 0xbe000000
** Flash image not found. **
Board IP address : 192.168.1.1:ffffff00
Host IP address : 192.168.1.100
Gateway IP address :
Run from flash/host (f/h) : f
Default host run file name : vmlinux
Default host flash file name : bcm963xx_fs_kernel
Boot delay (0-9 seconds) : 1
Board Id (0-5) : 96358VW2
Number of MAC Addresses (1-32) : 11
Base MAC Address : 00:25:5e:d2:c5:1f
PSI Size (1-64) KBytes : 48
Main Thread Number : 0
web info: Waiting for connection on socket 0.
CFE> CFE> e n
Erase nvram? (y/n):y
Resetting board...
CFE version 1.0.37-102.9 for BCM96358 (32bit,SP,BE)
Build Date: Thu Jan 15 20:34:16 PST 2009 (root@pclinux-lkaplan)
Copyright (C) 2000-2008 Broadcom Corporation.
Parallel flash device: name AM29LV320MT, id 0x2201, size 16384KB
*** Board is not initialized properly ***
Press:<enter> to use current value
'-' to go previous parameter
'.' to clear the current value
'x' to exit this command
96358VW2 ------- 0
96358VW ------- 1
96358GWVG ------- 2
96358IVWG ------- 3
96358SV ------- 4
96358ADWG ------- 5
Board Id (0-5) :0
Number of MAC Addresses (1-32) :1012
Base MAC Address :00:10:18:00:00:0000:25:5e:d2:c5:1f
PSI Size (1-64) KBytes :2424
Main Thread Number :00
Auto-negotiation timed-out
10 MB Half-Duplex (assumed)
CPU type 0x2A010: 300MHz, Bus: 133MHz, Ref: 64MHz
CPU running TP0
Total memory: 33554432 bytes (32MB)
Boot Address 0xbe000000
Use default boot line parameters: e=192.168.1.1:ffffff00 h=192.168.1.100 g= r=f
f=vmlinux i=bcm963xx_fs_kernel d=1 p=0
** Flash image not found. **
Board IP address : 192.168.1.1:ffffff00
Host IP address : 192.168.1.100
Gateway IP address :
Run from flash/host (f/h) : f
Default host run file name : vmlinux
Default host flash file name : bcm963xx_fs_kernel
Boot delay (0-9 seconds) : 1
Board Id (0-5) : 96358VW2
Number of MAC Addresses (1-32) : 12
Base MAC Address : 00:25:5e:d2:c5:1f
PSI Size (1-64) KBytes : 24
Main Thread Number : 0
web info: Waiting for connection on socket 0.
CFE> 102.6版本的CFE居然支持12个硬件版本,如下:
Press:<enter> to use current value
'-' to go previous parameter
'.' to clear the current value
'x' to exit this command
96358VW2 ------- 0
96358VW2_N60 ------- 1
96358VW2_N62 ------- 2
96358VW2_LAN ------- 3
6358_LAN_E8B ------- 4
96358VW2_ADSL ------- 5
96358MVWG_EPON ------- 6
96358VW ------- 7
96358GWVG ------- 8
96358IVWG ------- 9
96358SV ------- 10
96358ADWG ------- 11
96358VW2_E87 ------- 12
在102.6版本的时候选择96358VW2_N60 ------- 1 还可以登录网页的,选择96358VW2 ------- 0 就不可以,现在升级了102.9版本没有96358VW2_N60这一项了,机器只有六个可以选择的,每一个我都试了,全都连接不上,该怎么办? Use default boot line parameters: e=192.168.1.1:ffffff00 h=192.168.1.100 g= r=f
f=vmlinux i=bcm963xx_fs_kernel d=1 p=0
** Flash image not found. **
这句的意思是找不到系统,就说你刷入的这个固件无效,需要更换固件,cfe本身没问题
cpu id 选择与固件对应就行了,下载固件后用文本打开可以看到开头有cpu型号
页:
[1]