求一个TP 89841n V3 的编程器固件
求一个TP 89841n V3 的编程器固件，我用编程器写入了下载版的固件，可以启动，但是不能进入webping也可以通，不知道为什么**********RomStart now***********
imem initializing...
IMEM Start: 0x80350000
IMEM End: 0x80359dd4
IMEM Usage(KBytes): 0x00000027
**********step in sysHwInit()***********
init system clock to a quiescent state
init the BSP serial device descriptors and puts the devices in a quiesent state
sram_begin: 0x80360000
sram_end: 0x8036404c
__sram_size_type: 0x00000008
__sram_used_size(KBytes): 0x00000010
Conntrack init...
Conntrack init conntrack list ok
mem_initPool is been called: malloc 84*5120 (0x80ef1410 - 0x80f5a410)
Conntrack entry (num: 5120) done.
conntrack hash table (size: 1280) done.
mem_initPool is been called: malloc 8*10240 (0x80edd3d0 - 0x80ef13d0)
Conntrack hash node (num: 10240) done.
conn_proto_gre_init() init done.
Conntrack proto handler done.
Conntrack fragment hash table (size: 32) done.
mem_initPool is been called: malloc 24*128 (0x80edc790 - 0x80edd390)
Conntrack fragment hash node (num: 128) done.
conntrack timer start.
mem_initPool is been called: malloc 44*5120 (0x80ea5750 - 0x80edc750)
Conntrack expect entry (num: 5120) donAttaching interface lo0... done
e.
Conntrack expect tplhash table (size: 1280) done.
mem_initPool is been called: malloc 8*5120 (0x80e9b710 - 0x80ea5710)
Conntrack expect tplhash node (num: 5120) done.
Conntrack expect addrhash table (size: 1280) done.
mem_initPool is been called: malloc 8*5120 (0x80e916d0 - 0x80e9b6d0)
Conntrack expect addrhash node (num: 5120) done.
conntrack expect init done!
Conntrack helper (num: 100) done.
conntrack help init done!
Conntrack init done!
napt pt init ok!
napt init ok!
rule_init() 104 * 200!
Now step in rtl8672veEthEndLoad(): Pass 1 !
Now step in rtl8672veEthEndLoad(): Pass 2 !
<<<<<<<disable GPIO JTAG function.>>>>>>>
phy 1 10M EEE disabled 100M EEE disabled
phy 2 10M EEE disabled 100M EEE disabled
phy 3 10M EEE disabled 100M EEE disabled
phy 4 10M EEE disabled 100M EEE disabled
phy 0 10M EEE disabled 100M EEE disabled
Disable rx & tx of switch port0 ~ port5!
struct attached topEthDrvCtrl
rtl8672veEthEndLoad for unit 0 ... Done
Eth Starting ...
starting interface 0
Attached IPv4 interface to eth unit 0
usrNetBootConfig: Invalid Argument
Adding 6705 symbols for standalone.
Creation date: Jun 18 2012, 08:55:53
l2filter_init(): L2Filter init OK!
Product id:0x89841003 version:0x3!!!
<TD-W89741N>mem_initPool is been called: malloc 12*10 (0x80d14020 - 0x80d14098)
mem_initPool is been called: malloc 8*20 (0x80d13f40 - 0x80d13fe0)
initFtpAlg(): Done!
initTftpAlg(): Done!
mem_initPool is been called: malloc 32*40 (0x80d13a00 - 0x80d13f00)
mem_initPool is been called: malloc 20*20 (0x80d13830 - 0x80d139c0)
alg_init(): ALG INIT OK
mem_initPool is been called: malloc 104*256 (0x80d0cff0 - 0x80d137f0)
mem_initPool is been called: malloc 16*256 (0x80d0bfb0 - 0x80d0cfb0)
[ dm_loadCfg ] 2246:software version is not match, in config, version = 4294967295
[ parseConfigNode ] 521:Meet unrecognized object node "DynDnsCfg", skip the node
[ parseConfigNode ] 521:Meet unrecognized object node "NoipDnsCfg", skip the node
[ parseConfigNode ] 521:Meet unrecognized object node "SnmpCfg", skip the node
[ parseConfigNode ] 526:Meet unrecognized parameter node "SourceMACFromVendorClassIDFilterExclude", skip the node
[ checkRsaSign ] 337:RSA empty sign
[ oal_sys_disableForwarding ] 120:Disable F
[ msg_connSrv ] 252:Can't connect server 7 and retry
[ msg_connSrv ] 252:Can't connect server 11 and retry
Interface has NOT been attach to ip stack yet!
starting mirror0
starting mirror1
br0 setup done!
IP Detach eth0
eth0 attach to br0 done!
go to tpPacketManagementInit
RTL8192C/RTL8188C driver version 1.1 (2010-03-12)
=====>>INSIDE rtl8192cd_init_one <<=====
vendor_deivce_id=819110ec
invalid mac addr FF:FF:FF:FF:FF:FF
=====>>EXIT rtl8192cd_init_one <<=====
tx_power_tracking Thread create successfully!
=====>>INSIDE rtl8192cd_init_one <<=====
invalid mac addr FF:FF:FF:FF:FF:FF
=====>>EXIT rtl8192cd_init_one <<=====RTL_WL_MainAP_End_load(303)
RTL_WL_MainAP_End_load(336)
=====>>INSIDE rtl8192cd_init_one <<=====
kTPT_threadinvalid mac addrstFFart!
:FF:FF:FF:FF:FF
=====>>EXIT rtl8192cd_init_one <<=====
=====>>INSIDE rtl8192cd_inwait for root interface ss_timer!!
it_one <<=====
invalid mac addr FF:FF:FF:FF:FF:FF
=====>>EXIT rtl8192cd_init_one <<=====
=====>>INSIDE rtl8192cd_init_one <<=====
invalid mac addr FF:FF:FF:FF:FF:FF
=====>>EXIT rtl8192cd_init_one <<=====
=====>>INSIDE rtl8192cd_init_one <<=====
invalid mac addr FF:FF:FF:FF:FF:FF
=====>>EXIT rtl8192cd_init_one <<=====
val=5
val=c6
_
ssid=TP-LINK_FFFFFF len=14
===========>this DUT is not calibrated<==============
val=4
val=c6
ssid=TP-LINK_FFFFFF_01 len=17
===========>this DUT is not calibrated<==============
wait for root interface ss_timer!!
wait for root interface ss_timer!!
ch:1 cca=91, fa:93, rx_count:1, rx_count_40M:0
ch:2 cca=145, fa:165, rx_count:0, rx_count_40M:0
ch:3 cca=98, fa:107, rx_count:0, rx_count_40M:0
ch:4 cca=57, fa:59, rx_count:1, rx_count_40M:1
ch:5 cca=1946, fa:1976, rx_count:1, rx_count_40M:1
ch:6 cca=110, fa:112, rx_count:2, rx_count_40M:1
ch:7 cca=2295, fa:2323, rx_count:1, rx_count_40M:0
ch:8 cca=75, fa:82, rx_count:1, rx_count_40M:0
ch:9 cca=95, fa:108, rx_count:0, rx_count_40M:0
ch:10 cca=114, fa:113, rx_count:0, rx_count_40M:0
ch:11 cca=170, fa:133, rx_count:0, rx_count_40M:0
ch:12 cca=411, fa:387, rx_count:1, rx_count_40M:0
ch:13 cca=304, fa:244, rx_count:0, rx_count_40M:0
ch1,127,ch2,211,ch3,169,ch4,134,ch5,2055,ch6,196,ch7,2399,ch8,147,ch9,160,ch10,148,ch11,152,ch12,397,ch13,253,
channel=1
channel=1
channel=1
ssid=TP-LINK_FFFFFF_02 len=17
===========>this DUT is not calibrated<==============
ssid=TP-LINK_FFFFFF_03 len=17
===========>this DUT is not calibrated<==============
ssid= len=0
wlan0 attach to br0 done!
apc0 attach to br0 done!
wps set beacon ie
[ msg_connSrv ] 252:Can't connect server 8 and retry
[ msg_connSrv ] 252:Can't connect server 8 and retry
[ msg_connSrv ] 252:Can't connect server 8 and retry
[ msg_connSrv ] 252:Can't connect server 8 and retry
mem_initPool is been called: malloc 60*64 (0x8094d420 - 0x8094e320)
[ msg_connSrv ] 252:Can't connect server 9 and retry
tc_core_init(): psched_tick_per_us=819200 psched_us_per_tick=1000000 clock_factor=1.000000 tick_in_used=0.819200
HTB ROOT QDISC:size=1232
+ HTB CLASS:size=98832
tc_htb_init:addr=0x80928b30endAddr=0x80940d40rootqNum=2classMaxNum=40
SFQ QDISC:size=129880
tc_sfq_init:addr=0x80908fc0endAddr=0x80928b18ruleNum=34
PFIFO QDISC:size=1000
tc_fifo_init:addr=0x80908bc0endAddr=0x80908fa8ruleNum=10
FW FILTER:size=1584
tc_fw_init:addr=0x80908580endAddr=0x80908bb0num=36
[ oal_dsl_getWanDslIntfCfg ] 634:some other kind of status 6
[ oal_dsl_configUp ] 539:DMT set adsl mode = 0x7f
no interface name: vc0 found!
ifMgr_ifIsUp(): Get interface failed!
Now step in rtl8672veSarEndLoad(): Pass 1 !
Now step in rtl8672veSarEndLoad(): Pass 2 !
struct attached topSarDrvCtrl
rtl8672veSarEndLoad for unit 0 ... Done
setAtmParams(): set vc0(0/35) atm params:
encap:0, connType:0, qosType:1, pcr:0, scr:0, mbs:0
setAtmParams(): Create ch0 for vc0(0/35) and filling the atm params
Sar Starting ...
sar_open(): ch0(0/35)
CreateVC(): ch0(0/35); total_pvc_number: 1
ADSL Idle/L3/Activating!
DeleteVC(): ch0(0/35); total_pvc_number: 0
sar_close(): ch0(0/35)
CreateVC(): ch0(0/35); total_pvc_number: 1
applying workaround...done
starting interface vc0 done
IP address of the interface not specified!
Please set the interface configuration parameter correctly.
For example: "10.11.12.1"
vc0 attach to br0 done!
no interface name: vc1 found!
ifMgr_ifIsUp(): Get interface failed!
Now step in rtl8672veSarEndLoad(): Pass 1 !
Now step in rtl8672veSarEndLoad(): Pass 2 !
struct attached topSarDrvCtrl
rtl8672veSarEndLoad for unit 1 ... Done
setAtmParams(): set vc1(8/35) atm params:
encap:0, connType:0, qosType:1, pcr:0, scr:0, mbs:0
setAtmParams(): Create ch1 for vc1(8/35) and filling the atm params
Sar Starting ...
sar_open(): ch1(8/35)
CreateVC(): ch1(8/35); total_pvc_number: 2
DeleteVC(): ch0(0/35); total_pvc_number: 1
sar_close(): ch0(0/35)
DeleteVC(): ch1(8/35); total_pvc_number: 0
sar_close(): ch1(8/35)
CreateVC(): ch0(0/35); total_pvc_number: 1
CreateVC(): ch1(8/35); total_pvc_number: 2
applying workaround...done
starting interface vc1 done
IP address of the interface not specified!
Please set the interface configuration parameter correctly.
For example: "10.11.12.1"
vc1 attach to br0 done!
username:[ msg_connSrv ] 252:Can't connect server 13 and retry
alg_open(): OK 0
alg_open(): OK 5
delVpnRule() ERROR.
alg_open(): OK 1
delVpnRule() ERROR.
alg_open(): OK 3
delVpnRule() ERROR.
alg_open(): OK 2
enable fast aging...
disable fast aging...
Now step in rtl8672veEthEndLoad(): Pass 1 !
Now step in rtl8672veEthEndLoad(): Pass 2 !
struct attached topEthDrvCtrl
rtl8672veEthEndLoad for unit 1 ... Done
Eth Starting ...
starting interface 1
Now step in rtl8672veEthEndLoad(): Pass 1 !
Now step in rtl8672veEthEndLoad(): Pass 2 !
struct attached topEthDrvCtrl
rtl8672veEthEndLoad for unit 2 ... Done
Eth Starting ...
starting interface 2
Now step in rtl8672veEthEndLoad(): Pass 1 !
Now step in rtl8672veEthEndLoad(): Pass 2 !
struct attached topEthDrvCtrl
rtl8672veEthEndLoad for unit 3 ... Done
Eth Starting ...
starting interface 3
eth0 is attached back to free list done!
eth0 detach from br0 done!
eth0 attach to br0 done!
eth1 attach to br0 done!
eth2 attach to br0 done!
eth3 attach to br0 done!
[ msg_connSrv ] 252:Can't connect server 10 and retry
Interface has NOT been attach to ip stack yet!
starting mirror2
starting mirror3
br1 setup done!
Interface has NOT been attach to ip stack yet!
no interface name: vc2 found!
ifMgr_ifIsUp(): Get interface failed!
Now step in rtl8672veSarEndLoad(): Pass 1 !
Now step in rtl8672veSarEndLoad(): Pass 2 !
struct attached topSarDrvCtrl
rtl8672veSarEndLoad for unit 2 ... Done
setAtmParams(): set vc2(8/81) atm params:
encap:0, connType:0, qosType:1, pcr:0, scr:0, mbs:0
setAtmParams(): Create ch2 for vc2(8/81) and filling the atm params
Sar Starting ...
sar_open(): ch2(8/81)
CreateVC(): ch2(8/81); total_pvc_number: 3
DeleteVC(): ch0(0/35); total_pvc_number: 2
sar_close(): ch0(0/35)
DeleteVC(): ch1(8/35); total_pvc_number: 1
sar_close(): ch1(8/35)
DeleteVC(): ch2(8/81); total_pvc_number: 0
sar_close(): ch2(8/81)
CreateVC(): ch0(0/35); total_pvc_number: 1
CreateVC(): ch1(8/35); total_pvc_number: 2
CreateVC(): ch2(8/81); total_pvc_number: 3
applying workaround...done
starting interface vc2 done
IP address of the interface not specified!
Please set the interface configuration parameter correctly.
For example: "10.11.12.1"
vc2 attach to br0 done!
vc2 is attached back to free list done!
vc2 detach from br0 done!
vc2 attach to br1 done!
[ addIptvLanPorts ] 710:Move LAN intf to iptv group: eth2
eth2 is attached back to free list done!
eth2 detach from br0 done!
eth2 attach to br1 done!
Enable rx & tx of switch port0 ~ port5!
是不是因为mac 地址 ffffff 无效？ 89741的也行 wifi芯片mac ffffff可能芯片型号有吴试试w89741 v3吧741无线芯片是rtl8188 chinadna 发表于 2014-2-15 22:49
wifi芯片mac ffffff可能芯片型号有吴试试w89741 v3吧741无线芯片是rtl8188
芯片没问题。官网下载的固件mac 是空的，内置8188和8192是一个驱动，同时支持两个芯片，我这个就是地址无效造成的，有编程备份的固件我可以找到mac地址的位置 你有编程器为什么不先备份 chinadna 发表于 2014-2-18 19:18
你有编程器为什么不先备份
后买的编程器 自己顶一下，继续求固件 就没人有吗？ 给个导出 的配置也行啊
页:
[1]
2